1 4

MikroElektronika

Riverdi click

Riverdi click

MIKROE-2100

Rs. 949.00
Rs. 949.00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Riverdi click is an adapter for connecting Riverdi TFT displays to a mikroBUS socket. The onboard zif20 connector allows you to interface between the target MCU and an FT8xx graphic controller on Riverdi displays. The click runs on either 3.3V or 5V power supply.

Note: Riverdi click comes with a flat flexible cable for the onboard zif20 connector.

I2C/SPI interface

Riverdi click can have either an I2C or an SPI interface. A set on onboard jumpers allows you to switch between these communication lines.

Specifications

Type Adapter
Applications Interfacing Riverdi HMI displays with mikroBUS™ compatible development boards
On-board modules zif20 connector. FT8xx graphic controller
Key Features SPI/I2C interface with selection jumpers
Key Benefits Simplest way to interface a large number of TFT displays with mikroBUS™
Interface GPIO,I2C,SPI
Input Voltage 3.3V or 5V
Compatibility mikroBUS
Click board size S (28.6 x 25.4 mm)

Pinout diagram

This table shows how the pinout on Riverdi click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 NC
Reset RST 2 RST INT 15 INT Interrupt
Chip select CS 3 CS TX 14 NC
SPI clock SCK 4 SCK RX 13 NC
Master input slave output MISO 5 MISO SCL 12 SCL SCL I2C line
Master output slave input MOSI 6 MOSI SDA 11 SDA SDA I2C line
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Jumpers and settings

Designator Name Default Position Default Option Description
J1 SCK/SCL Select between SCL/SDK
J2 MISO/SDA Select between MISO/SDA
J3 SPI/I2C Select between SPI/I2C

View full details

New Products

1 25
View all