{"title":"Popular","description":"","products":[{"product_id":"analog-discovery-studio","title":"Analog Discovery Studio","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat is the Analog Discovery Studio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and breadboardable interface, perfect for enabling student learning anywhere!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith lab spaces decreasing and student enrollment increasing, many institutions are choosing studio learning as a supplement to traditional laboratories, creating a need for a portable test and measurement bench that can support all types of circuits projects. With an Analog Discovery Studio, students can continue their hands-on learning in the library, office hours, a tutoring center, a classroom, or even in a coffee shop.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Analog Discovery Studio supports hands-on learning for any student, and is available with free Mac, Linux, and Windows compatible software, WaveForms.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"The Analog Discovery Studio in use\" src=\"https:\/\/cdn10.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/ads-in-use.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn10.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/ads-in-use.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat is WaveForms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWaveForms is the free software application for the Analog Discovery Studio and enables use of the available analog and digital instruments. The software has been refined by customer feedback for over 10 years and features a computer and laptop friendly user interface that has the feel of traditional benchtop software. The Analog Discovery Studio communicates with WaveForms via a USB connection to your computer, allowing users to capture, record, analyze, and generate mixed signal and mixed domain waveforms. WaveForms can be downloaded and installed in under 60 seconds and can be tested without hardware using its demo mode feature. In addition to the use of instruments in the application, WaveForms has a script editor tool, which allows custom scripting of the instrument in JavaScript. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"WaveForms Spectrum Analyzer\" src=\"https:\/\/cdn10.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/spectrum-analyzer-ad2.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn10.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/spectrum-analyzer-ad2.png\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOperating system compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWaveForms is designed to be run on a laptop or desktop computer and is Mac, Windows, and Linux compatible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnalog Inputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed in the Oscilloscope, Network Analyzer, Spectrum Analyzer, Voltmeter, Impedance Analyzer, and Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwo analog input channels, accessible through BNC or MTE connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChannel type: differential (with MTE) or single-ended (with BNC)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnalog bandwidth with BNC cables: 30+ MHz @ 3dB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnalog bandwidth with MTE flywires: 9 MHz @ 3dB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput range ±25 V (±50 V diff)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput protected to ±50 V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e14-bit resolution\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperate at 100 MS\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnalog Outputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed in the Waveform Generator and Network Analyzer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwo arbitrary waveform generator channels, accessible through BNC or MTE connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAC amplitude (max): ±5 V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnalog bandwidth (BNC or MTE connectors: 8 MHz @ 3dB)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperate at 100 MS\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDigital Inputs and Outputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsed in the Logic Analyzer, Pattern Generator, Protocol Analyzer, and Digital I\/O\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChannels: 16\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput logic standard: LVCMOS (1.8\/3.3V, 5V tolerant)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput logic standard: LVCMOS (3.3V, 12mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePower Supplies:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e12 volt supply: 12V ±5%; 0.2 Amps max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-12 volt supply: -12V ±5%, 0.2 Amps max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5 volt supply: 5.0V ±5%; 1.0 Amps max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.3 volt supply: 3.3V ±5%; 1.0 Amps max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eV+ and V- rails: 1V to 5V (V+), and -1V to -5V (V-)\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum power output: 2.1W for each supply\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum current output: 700mA for each supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSoftware Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlong with the stable WaveForms application, the Analog Discovery Studio is also a programmable USB oscilloscope and logic analyzer. For more advanced users who require building applications or automated test, WaveForms Software Development Kit (SDK) is also provided. The WaveForms SDK provides libraries and examples for creating custom application in Python, C++, C#, and Visual Basic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdditional 3rd party toolbox support, examples, and documentation is available for MATLAB and LabVIEW from MathWorks and National Instruments, respectively. Perfect for comparing simulation and actual results.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore information on specific operating system and programming language details can be found on the WaveForms resource center. Questions about compatibility and operating systems should be directed to the \u003ca href=\"https:\/\/forum.digilentinc.com\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/forum.digilentinc.com\/\"\u003eDigilent Forum\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePhysical Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Analog Discovery Studio is designed to be a compact alternative to a stack of benchtop equipment. Its durable enclosure measures 1.25 x 9.25 x 7.5 inches and fits on a bench, desktop, or backpack. Students can access the Oscilloscope and Waveform Generators via breadboardable MTE cables, or industry standard BNC cables, and the Logic Analyzer, Pattern Generator, and Triggers can be accessed via MTE cables. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCircuits or designs can be built on the included, magnetically connected Breadboard Canvas and conveniently swapped out or removed for transit, making the transition from working in the lab to working at home as seamless as possible. The Breadboard Canvas also includes power supply outputs controlled by physical switches, common I\/O built-in, and a large breadboardable surface. The Breadboard Canvas and the cost-optimized Blank Canvas can be purchased separately in the event that an extra is needed, or if the breadboards wear out. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe \u003ca href=\"https:\/\/www.mgsuperlabs.co.in\/estore\/Analog-Discovery-2-100-MS-s-USB-Oscilloscope-Logic-Analyzer-and-Variable-Power-Supply\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.mgsuperlabs.co.in\/estore\/Analog-Discovery-2-100-MS-s-USB-Oscilloscope-Logic-Analyzer-and-Variable-Power-Supply\"\u003eAnalog Discovery 2\u003c\/a\u003e is an alternative option to the Analog Discovery Studio if a pocket-sized or USB-powered device is needed. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnalog Discovery Studio (410-384):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnalog Discovery Studio\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBreadboard Canvas\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e15 V 2.4A power supply\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB A to B cable\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA set of Analog Discovery Studio MTE Cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":43724831818011,"sku":"DG 410-384","price":80729.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/48122399217_b4fa942c3a_o__47808.png?v=1775036372"},{"product_id":"oak-d-lite-fixed-focus","title":"Oak-D Lite Fixed Focus","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eOAK-D Lite\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003ebrings together the concepts of high performance and affordability. Offering all the superpowers offered by our DepthAI API, it gives you the opportunity to unlock all sorts of applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAwards:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0106\/8325\/2802\/files\/award_480x480.png?v=1654120612\" width=\"230\" height=\"230\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0106\/8325\/2802\/files\/award_480x480.png?v=1654120612\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eMain Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB-C connector for both power and communication, supporting USB2 and USB3 protocols (5Gbps \/ 10Gbps)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 TOPS\u003c\/strong\u003e\u003cspan\u003e of processing power (1.4 TOPS for AI)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun any AI model\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e,\u003c\/strong\u003e even custom architectured\/built ones\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncoding\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e:\u003c\/strong\u003e H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComputer vision\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e:\u003c\/strong\u003e warp\/dewarp, resize, crop, edge detection, feature tracking\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo depth\u003c\/strong\u003e\u003cspan\u003e perception at 200FPS+ with filtering\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObject tracking\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e: \u003c\/strong\u003e2D and 3D tracking\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e91x28x17.5 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e61g\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAvailable in two variants:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eThe OAK-D Lite is available in two variants:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eFixed-Focus\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eAuto-Focus\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e. These variants differ only in the configuration of the center color camera. The Fixed-Focus variant has the lens fixed in place mechanically, whereas the Auto-Focus has an electromagnet that controls the lens position dynamically. Both variants can clearly see objects 50 cm and beyond.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eAuto-Focus\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e \u003c\/span\u003ecameras are recommended for close objects between 10 cm to 50 cm of the device (see\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=N4ryzm_uRhY\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=N4ryzm_uRhY\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003evideo\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e). They can also be manually set to a specific focus position utilizing the DepthAI API.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eFixed-Focus\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e \u003c\/span\u003ecameras are recommended for heavy-vibration applications, such as drones, lawnmowers, or vehicles (see\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=jpnsTsCGbQk\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=jpnsTsCGbQk\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003evideo\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCamera Specifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eColor camera\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eStereo pair\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eIMX214\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eOV7251\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eDFOV \/ HFOV \/ VFOV\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e81° \/ 69° \/ 54°\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e86° \/ 73° \/ 58°\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eResolution\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e13MP (4208x3120)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e480MP (640x480)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFocus\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eAuto-Focus: 8cm - ∞\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFixed-Focus: 6.5cm  - ∞\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eMax Framerate\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e60 FPS\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e120 FPS\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eF-number\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e2.0\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e2.2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eLens size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e1\/3.1 inch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e1\/7.5 inch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cb\u003eDocumentation:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9095.html\" data-mce-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9095.html\" target=\"_blank\"\u003e\u003cspan\u003eProduct documentation\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1Y5wI_jkeLYszHlE4kSi3M7PhN0coex5_\/view?usp=sharing\" data-mce-href=\"https:\/\/drive.google.com\/file\/d\/1Y5wI_jkeLYszHlE4kSi3M7PhN0coex5_\/view?usp=sharing\" target=\"_blank\"\u003e\u003cb\u003eCE Certificate\u003c\/b\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePackage includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOAK-D-Lite camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":43953253515547,"sku":"Luxonis-A00532","price":20999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/OAK-D-Lite_front_900x_435ca123-c05e-4db6-94dc-15cf25a6a020.jpg?v=1668455221"},{"product_id":"thrust-upgrade-bundle-for-crazyflie-2-xv","title":"Thrust upgrade bundle for Crazyflie 2.X","description":"\u003cp data-mce-fragment=\"1\"\u003eWith the thrust upgrade bundle you can easily get an additional 20 grams of thrust. Switching out the standard motors to the \u003cspan data-mce-fragment=\"1\"\u003e4 mm longer is as easy as replacing a stock motor. Together with the matching propeller it will add approximately 5 grams of thrust per motor. The added thrust comes at the expense of roughly 15% less flight time.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47186670223643,"sku":"BIT-900000028","price":1949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Thrustupgradekittotal_1024x1024_76779d62-eb1c-4689-9d96-0920d4240639.webp?v=1699435013"},{"product_id":"male-deck-connector","title":"Male deck connector","description":"\u003cp data-mce-fragment=\"1\"\u003eThis product is intended to be used together with the Crazyflie 2.X expansion deck system. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 x short male expansion header (8mm long)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 x long male expansion header (14mm long)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/male_deck_connector\/male_deck_connector-datasheet.pdf\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/male_deck_connector\/male_deck_connector-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47186866929947,"sku":"Bit-110990443","price":279.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/110990443.jpg?v=1699440115"},{"product_id":"buzzer-deck","title":"Buzzer deck","description":"\u003cp\u003eSometimes LED feedback isn’t enough, like when you’re flying around in a lab or a living room. With the buzzer deck you’ll get audio feedback on system events, like low battery or charging completed. Or why not create your own melodies that will play while you’re buzzing around? To get started using the buzzer deck there’s already a few melodies pre-programmed in the Crazyflie 2.X firmware.\u003c\/p\u003e\n\u003cp\u003eFor more information, see the \u003ca title=\"Buzzer deck web page\" href=\"https:\/\/www.bitcraze.io\/buzzer-deck\/\"\u003eBuzzer deck web page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/m6rL3y-gLG4?start=2\" width=\"560\" height=\"315\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow profile piezo buzzer for tone and melody generation\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of deck via 1-wire memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBased on \u003ca href=\"http:\/\/www.cui.com\/product\/resource\/cmt-1203-smt.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCMT-1203-SMT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 1.8g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 25x27x4mm\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting above or under the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee compatibility matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Buzzer deck \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320823202075,"sku":"Bit-102990228","price":1099.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/BuzzerDeckPic_3_of_4_1024x1024_26b888b8-6977-472f-96ad-03f7518b0aa5.webp?v=1700755352"},{"product_id":"500ma-lipo-usb-charger","title":"500mA LiPo USB charger","description":"\u003cp\u003eUse the Bitcraze battery charger to always have your spare batteries full to maximize your flight time. If you’re a bit handy with a soldering iron you can even solder multiple chargers together for multi-battery charging. \u003c\/p\u003e\n\u003cp\u003eFor more details, please see \u003ca title=\"Bitcraze website\" href=\"https:\/\/www.bitcraze.io\/products\/battery-chg-500mA\/\"\u003ethe product page on our web\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500mA single-cell Li-Po battery charger\u003c\/li\u003e\n\u003cli\u003eCharging indicator\u003c\/li\u003e\n\u003cli\u003eConnection points for chaining of multiple chargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x LiPo battery charger \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/lipo_charger_500ma\/lipo_charger_500ma-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/lipo_charger_500ma\/chg500ma_reva.pdf\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320823365915,"sku":"Bit-102990463","price":659.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/102990463.webp?v=1700735760"},{"product_id":"female-deck-connector","title":"Female Deck Connector","description":"\u003cp\u003eAfter prototyping your own hardware for the Crazyflie 2.X you might be interested in designing you own expansion deck. To make that easier we supply the female header that is used for all our decks to ensure compatibility with the current system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4 x SMD female expansion header\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/female_deck_connector\/female_deck_connector-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320823759131,"sku":"Bit-110990442","price":219.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Female-header-400px-1_1024x1024_c1296e2a-73ad-4541-b958-41ffe364a95b.webp?v=1700755385"},{"product_id":"crazyflie-2-x-4-x-spare-7-mm-motor-mounts","title":"Crazyflie 2.X: 4 x Spare 7 mm Motor Mounts","description":"\u003cp\u003eThis product is a spare part for the Crazyflie 2.X and is intended to fit the Crazyflie 2.X - Spare 7x16 mm coreless DC motor. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 7mm motor mounts \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/motor_mounts_7mm\/motor_mounts_7mm-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320823857435,"sku":"Bit-110990444","price":659.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/110990444.jpg?v=1700816285"},{"product_id":"4-x-7-mm-dc-motor-pack-for-crazyflie-2-x","title":"4 x 7 mm DC-Motor Pack For Crazyflie 2.X","description":"\u003cp\u003ePack of 4 spare brushed coreless DC-motors for Crazyflie 2.X.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 7.0 mm\u003c\/li\u003e\n\u003cli\u003eLength: 16.0 mm\u003c\/li\u003e\n\u003cli\u003eShaft length: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 0.8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7 g\u003c\/li\u003e\n\u003cli\u003eWire length: 32.0 mm\u003c\/li\u003e\n\u003cli\u003eMolex picoblade 2P connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKv: 14 000 rpm\/V\u003c\/li\u003e\n\u003cli\u003eRated voltage: 4.2 V\u003c\/li\u003e\n\u003cli\u003eRated current: 1000mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 7mm brushed coreless DC-motors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320823922971,"sku":"Bit-110990844","price":1209.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/mototrs-400px_1024x10243L2cM5t5XJiac.jpg?v=1700735510"},{"product_id":"led-ring-deck","title":"LED-ring deck","description":"\u003cp\u003eLight up the dark with custom patterns using the Crazyflie 2.X LED-ring expansion board. Featuring 12 strong RGB LEDs facing downwards, you can create custom patterns in firmware that you control from your Android\/iPhone or computer. Two additional strong front facing LEDs that can be switched on and off, act as headlights.\u003c\/p\u003e\n\u003cp\u003eFor more information see the \u003ca href=\"https:\/\/www.bitcraze.io\/led-ring-deck\/\"\u003eLED-ring expansion deck web page.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDC-DC step-up\/down gives stable LED light independent of battery voltage\u003c\/li\u003e\n\u003cli\u003eCreate custom patterns using the Crazyflie 2.X firmware\u003c\/li\u003e\n\u003cli\u003e12 RGB LED modules facing downwards\u003c\/li\u003e\n\u003cli\u003e2 strong LEDs facing forward\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of expansion board using 1-wire memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDC-DC step-up\/down gives up to 1A at 3.8V from input between 2-5.5V\u003c\/li\u003e\n\u003cli\u003e12 independently addressable RGB LED modules facing downwards (W2812B)\u003c\/li\u003e\n\u003cli\u003e2 strong white LEDs facing forward, emitting more than 1800 mcd\u003c\/li\u003e\n\u003cli\u003e1-wire memory for automatic expansion board detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for mounting under the Crazyflie facing downwards\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 33x33x5.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee compatibility matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x LED-ring expansion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824185115,"sku":"Bit-114990114","price":2419.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Led-ring-deck-400px-1_1024x1024_4cf4ab66-9a28-4b64-a630-38d5ca6f1a0e.webp?v=1700755478"},{"product_id":"prototyping-deck","title":"Prototyping deck","description":"\u003cp\u003eAdd a prototyping area to your Crazyflie 2.X and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port.\u003c\/p\u003e\n\u003cp\u003eFor more information, see the \u003ca title=\"Prototyping deck web page\" href=\"https:\/\/www.bitcraze.io\/prototyping-deck\/\"\u003ePrototyping deck web page\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoldering pads support both though hole and SMD components\u003c\/li\u003e\n\u003cli\u003eHas SOT-23 footprint for 1-wire memory used for automatic detection (not mounted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMakes all 20 pins in the Crazyflie 2.X expansion port available\u003c\/li\u003e\n\u003cli\u003e40 pads for prototyping (supporting both though hole and SMD components)\u003c\/li\u003e\n\u003cli\u003eFootprint for optional 1-wire memory (not mounted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 1.5 g\u003c\/li\u003e\n\u003cli\u003eSize (BxHxW): 28x28x4mm\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting above or under the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Prototyping expansion board\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824250651,"sku":"Bit 114990115","price":549.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/prototyping-deck-400px-3_1024x1024_2dafe601-fecc-46f9-9d79-c0602de7c903.webp?v=1700755557"},{"product_id":"battery-holder-deck","title":"Battery holder deck","description":"\u003cp\u003eSpare battery holder deck for Crazyflie 2.X.\u003cbr\u003e\u003cstrong\u003eMechanical specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.4g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 28x28x4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Battery holder deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRessources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/battery_deck\/battery_deck-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824414491,"sku":"Bit-114990121","price":549.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/114990121.jpg?v=1700740200"},{"product_id":"loco-positioning-deck","title":"Loco positioning deck","description":"\u003cp\u003eThe Loco positioning Deck is a Tag in the Loco Positioning system and measures the distance to Anchors. The distances are used to estimate the absolute position of the Crazyflie 2.X in the room, which can be used for autonomous flight. \u003cspan\u003eTo read more about the Loco positioning deck go to our \u003ca title=\"Loco positioning deck\" href=\"https:\/\/www.bitcraze.io\/loco-pos-deck\/\"\u003ewebsite\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003cspan\u003eThis product is intended to be used together with \u003ca title=\"Loco positioning node\" href=\"https:\/\/store.bitcraze.io\/products\/loco-positioning-node\"\u003eLoco Positioning Nodes\u003c\/a\u003e and can not be used standalone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor more information on the Loco Positioning System please see this \u003ca title=\"Loco Positioning System\" href=\"https:\/\/www.bitcraze.io\/loco-pos-system\/\"\u003eLoco Positioning System page\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications are based on the standard 2-way ranging mode.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMeasures distances to Loco Positioning Node Anchors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 status LEDs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBased on the Decawave DWM1000 module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eImplements IEEE 802.15.4 UWB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1-wire memory for automatic expansion deck detection\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRanging specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eRanging accuracy ±10 cm according to DWM1000 spec. See \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/misc:investigations:lps-precision\"\u003ethe wiki\u003c\/a\u003e for measurements.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum tested range 10 m\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRanging rate 500 Hz, shared over all anchors. Around 80Hz per anchor with 6 anchors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRadio specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOperates at 3.2 - 7 GHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChannel bandwidth 500 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax 150 mA, depends on operation mode and configuration\u003c\/li\u003e\n\u003cli\u003eCrazyflie 2.X flight time with deck 6 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 3.3 g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize (WxHxD): 28x35x4 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for mounting above or under the Crazyflie 2.X\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee compatibility matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLoco Positioning Nodes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Loco Positioning deck\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824578331,"sku":"Bit-114990655","price":9899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Loco-deck-400px-1_1024x1024_4211634c-d53a-41bd-92cf-99e22142e92b.webp?v=1700755220"},{"product_id":"loco-positioning-node","title":"Loco positioning node","description":"\u003cp\u003eThe Loco Positioning Node is a versatile positioning device that can run either as an Anchor or Tag in a Loco Positioning system. The system measures the distance between Nodes and Tags, and from those distances the absolute position of objects carrying Tags can be calculated.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor more information on the Loco Positioning System please see this \u003c\/span\u003e\u003ca title=\"Loco Positioning System\" href=\"https:\/\/www.bitcraze.io\/loco-pos-system\/\"\u003eLoco Positioning System page\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications are based on the standard 2-way ranging mode.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"collapse-section\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"CollapseSection46\" class=\"collapse in\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Anchor, Tag or Sniffer mode\u003c\/li\u003e\n\u003cli\u003eCan be used as a standalone system with some Nodes acting as Anchors and one or more nodes acting as Tags\u003c\/li\u003e\n\u003cli\u003eMultiple powering options\u003c\/li\u003e\n\u003cli\u003eOn board MCU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse-section\"\u003e\n\u003cdiv id=\"CollapseSection47\" class=\"collapse in\"\u003e\n\u003cp id=\"electrical-specification\"\u003e\u003cstrong\u003eElectrical specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBased on the Decawave DWM1000 module\u003c\/li\u003e\n\u003cli\u003eImplements IEEE 802.15.4 UWB\u003c\/li\u003e\n\u003cli\u003eSTM32F072 MCU (Cortex-M0, 48MHz, 16kb SRAM, 128kb flash)\u003c\/li\u003e\n\u003cli\u003eHigh precision pressure sensor (LPS25H)\u003c\/li\u003e\n\u003cli\u003euUSB connector\u003c\/li\u003e\n\u003cli\u003eFull speed USB device interface\u003c\/li\u003e\n\u003cli\u003ePowered by USB, 6 mm barrel jack (5 - 12V) or screw terminal (5 - 12V)\u003c\/li\u003e\n\u003cli\u003eFTDI debug port (not populated)\u003c\/li\u003e\n\u003cli\u003eSerial connector compatible with ESP8266 module (not populated)\u003c\/li\u003e\n\u003cli\u003ePower consumption 180 mA max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"ranging-specification\"\u003e\u003cstrong\u003eRanging specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRanging accuracy ±10 cm according to DWM1000 spec. See \u003ca href=\"https:\/\/wiki.bitcraze.io\/misc:investigations:lps-precision\"\u003ethe wiki\u003c\/a\u003e for measurements.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum tested range 10 m\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNr of anchors required: theoretical minimum of 4 for 3D positioning. More anchors adds redundancy and accuracy, up to 8 supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"radio-specification\"\u003e\u003cstrong\u003eRadio specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperates at 3.2 - 7 GHz\u003c\/li\u003e\n\u003cli\u003eChannel bandwidth 500 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"mechanical-specification\"\u003e\u003cstrong\u003eMechanical specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 13.3 g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 65x40x13 mm\u003c\/li\u003e\n\u003cli\u003e4 mounting holes for M3 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"compatibility\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the Loco Positioning Deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"package-contents\"\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Loco Positioning Node\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824643867,"sku":"Bit-114990656","price":18449.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Loco-node-400px-1_1024x1024_45463bf6-c8cc-41d7-afe2-4cb4d7c10053.webp?v=1700755244"},{"product_id":"sd-card-deck","title":"SD-card deck","description":"\u003cp\u003eAdd the possibility to read and write files to a micro SD card. As an example it could be used for high speed logging or for storing configuration.\u003c\/p\u003e\n\u003cp\u003eFor more information, see the \u003ca title=\"SD card deck web page\" href=\"https:\/\/www.bitcraze.io\/sd-card-deck\/\"\u003eSD-card deck web page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic detection of deck via 1-wire memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicro SD card reader\u003c\/li\u003e\n\u003cli\u003eSupport for FAT file system in the Crazyflie 2.X firmware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 1.7g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 21x28x4mm\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting above or under the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee compatibility matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SD-card deck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320824807707,"sku":"Bit-114990852","price":1099.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/SD-deck-400px-3_1024x1024_ff54d339-8fa6-4522-a5d0-997d41a2ee49.webp?v=1700755658"},{"product_id":"flow-deck-v2","title":"Flow deck v2","description":"\u003cp\u003e\u003cspan\u003eThe Flow deck gives the Crazyflie 2.X the ability to detect its motions in any direction. The VL53L1x ToF sensor measures the distance to the ground with high precision and the PMW3901 optical flow sensor measures movements of the ground.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis creates a flying 3D robot that can be pre-programmed to fly distances in any direction or act as an aid for beginners as it creates a very stable flying platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast, accurate distance ranging\u003c\/li\u003e\n\u003cli\u003eMeasures absolute range up to 4m\u003c\/li\u003e\n\u003cli\u003eEye safe\u003c\/li\u003e\n\u003cli\u003eMeasures horizontal movement\u003c\/li\u003e\n\u003cli\u003eCreates a 3D robot that can be pre-programmed\u003c\/li\u003e\n\u003cli\u003eAided flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"level2\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.st.com\/en\/imaging-and-photonics-solutions\/vl53l1x.html\"\u003eVL53L1x \u003c\/a\u003eToF sensor to measure distance up to 4 meters within a few millimeters (depending on surface and light conditions)\u003c\/li\u003e\n\u003cli class=\"level1\"\u003e\n\u003cdiv class=\"li\"\u003e1-wire memory for automatic expansion deck detection\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"level1\"\u003ePMW3901 optical flow sensor (works best on matt surfaces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eMechanical specifications\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"level2\"\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 1.6g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 21x28x4mm\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting under the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" target=\"_blank\"\u003eSee compatibility matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Flow v2 deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320825168155,"sku":"Bit-114991549","price":6049.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Flow_deck_v2_2400px-1_1024x1024_4f901e9c-46e5-4b77-84f9-3af47170fcad.webp?v=1700755403"},{"product_id":"crazyflie-2-1","title":"Crazyflie V2.1","description":"\u003cp\u003e\u003cstrong\u003e!!\u003ca href=\"https:\/\/mgsl.in\/products\/crazyflie-2-2\" target=\"_blank\" rel=\"noopener\"\u003eThis product has been upgraded to a newer model Crazyflie 2.1+\u003c\/a\u003e!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Crazyflie 2.1 is a versatile open source flying development platform that only weighs 27g and fits in the palm of your hand.\u003c\/p\u003e\n\u003cp\u003eThe Crazyflie 2.1 is a versatile open source flying development platform that only weighs 27g and fits in the palm of your hand. Crazyflie 2.1 is equipped with low-latency\/long-range radio as well as Bluetooth LE. This gives you the option of downloading our app and using your mobile device as a controller or, in combination with the \u003ca title=\"Crazyradio PA\" href=\"https:\/\/store.bitcraze.io\/products\/crazyradio-pa\"\u003eCrazyradio PA\u003c\/a\u003e, using your computer to display data and fly with a game controller.\u003c\/p\u003e\n\u003cp\u003eThe latest version of the successful Crazyflie development platform comes with improved flight performance, durability and radio. Together with an extensive ecosystem of software and deck expansions it's ideal for education, research and swarming.\u003c\/p\u003e\n\u003cp\u003eTo read more about the Crazyflie 2.1 go to our \u003ca title=\"Bitcraze website\" href=\"https:\/\/www.bitcraze.io\/products\/crazyflie-2-1\/\"\u003ewebsite\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable design\u003c\/li\u003e\n\u003cli\u003eEasy to assemble and no soldering required\u003c\/li\u003e\n\u003cli\u003eSupports expansion decks with automatic detection\u003c\/li\u003e\n\u003cli\u003eSupports flying from iOS and Android with Bluetooth LE, as well as from Windows\/Mac OSX\/Linux with the Crazyradio or Crazyradio PA\u003c\/li\u003e\n\u003cli\u003eTested to further than 1 km radio range line-of-sight (LOS) with the Crazyradio PA\u003c\/li\u003e\n\u003cli\u003eWireless firmware updates\u003c\/li\u003e\n\u003cli\u003eOn-board charging via standard uUSB\u003c\/li\u003e\n\u003cli\u003eDual-MCU architecture with dedicated radio\/power management SoC for advanced applications\u003c\/li\u003e\n\u003cli\u003eReal-time logging, graphing and variable setting in addition to full use of expansion decks when using a Crazyradio or Crazyradio PA and a computer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Crazyflie 2.1 control board\u003c\/li\u003e\n\u003cli\u003e1 x 250mAh LiPo battery (\u003ca title=\"240mAh LiPo battery\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/240mah-lipo-battery-including-500ma-usb-charger\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e5 x 7mm DC coreless motor (1 spare) (\u003ca title=\"4 x 7 mm DC-motor pack\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/4-x-7-mm-dc-motor-pack-for-crazyflie-2\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e6 x 7mm motor mounts (2 spare) (\u003ca title=\"Crazyflie 2.0: 4 x spare 7 mm motor mounts\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/crazyflie-2-0-4-x-spare-7-mm-motor-mounts\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1 x Foam battery pad\u003c\/li\u003e\n\u003cli\u003e5 x CCW propellers (3 spare) (\u003ca title=\"Propeller pack\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts\/products\/propeller-pack\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e5 x CW propellers (3 spare) (\u003ca title=\"Propeller pack\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts\/products\/propeller-pack\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1 x Battery holder deck (\u003ca title=\"Battery holder deck\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/battery-holder-deck\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e2 x Short male deck connectors (\u003ca title=\"Male deck connector\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/male-deck-connector\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e2 x Long male deck connectors (\u003ca title=\"Male deck connector\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/spare-parts-crazyflie-2-0\/products\/male-deck-connector\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1 x micro-USB cable (48cm) (\u003ca title=\"micro-USB cable (48 cm)\" href=\"https:\/\/bitcraze.myshopify.com\/collections\/accessories\/products\/micro-usb-cable-48cm\"\u003espare part\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/crazyflie_2_1\/crazyflie_2_1-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/crazyflie_2_1\/crazyflie_2.1_schematics_rev.b.pdf\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Crazyflie 2.1\" href=\"https:\/\/www.bitcraze.io\/products\/crazyflie-2-1\/\"\u003eWeb page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320825364763,"sku":"Bit-114991551","price":24949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/crazyflie_2.1_1200px_1024x1024_725f002c-38b5-45db-b6d1-f9b5e4f92d6e.webp?v=1700754106"},{"product_id":"male-long-deck-connector","title":"Male long deck connector","description":"\u003cp\u003eThis product is intended to be used together with the Crazyflie 2.X expansion deck system and makes it possible to fit 3 decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of positions: 10\u003c\/li\u003e\n\u003cli\u003eSpacing: 2mm\u003c\/li\u003e\n\u003cli\u003ePin thickness: 0.5mm\u003c\/li\u003e\n\u003cli\u003eSections: pin 15mm - plastic 4mm - pin 6mm\u003c\/li\u003e\n\u003cli\u003eLong male expansion header mechanical specification:\n\u003cul\u003e\n\u003cli\u003eWeight: 0.7g\u003c\/li\u003e\n\u003cli\u003eSize (BxHxW): 20x25x2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x long male expansion header\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320825757979,"sku":"Bit-114992164","price":219.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/long-pin-headers-top-1024px_1024x1024_ae83e957-2549-47b4-a299-32c8460de072.webp?v=1700755514"},{"product_id":"ai-deck-1-1","title":"AI-Deck 1.1","description":"\u003cp\u003eSuper-edge-computing on a 30 gram flying platform is now available!\u003c\/p\u003e\n\u003cp\u003eThanks to \u003ca href=\"https:\/\/greenwaves-technologies.com\/ai_processor_gap8\/\" target=\"_blank\"\u003ethe GAP8 IoT application processor\u003c\/a\u003e from \u003ca href=\"https:\/\/greenwaves-technologies.com\/\" target=\"_blank\"\u003eGreenWaves Technologies\u003c\/a\u003e and the ULP camera, the Crazyflie is able to capture, analyze and classify its environment, as previously presented by \u003ca title=\"ETH Zurich\" href=\"https:\/\/ethz.ch\/en.html\"\u003eETH Zurich\u003c\/a\u003e on the initial \u003ca href=\"https:\/\/arxiv.org\/abs\/1905.04166\"\u003ePULP-Shield PCB design from IIS-ETHZ. \u003c\/a\u003eThis lightweight and low-power combination opens up many research and development areas for the micro-sized Crazyflie 2.X UAV.\u003c\/p\u003e\n\u003cp\u003eThe AI-deck 1.1 extends the computational capabilities and will enable complex artificial intelligence-based workloads to run onboard, with the possibility to achieve fully autonomous navigation capabilities. The ESP32 adds WiFi connectivity with the possibility to stream images as well as handling control.\u003c\/p\u003e\n\u003cp\u003eThis product is in the early access stage so documentation and amount of examples are limited. To program this board a \u003cstrong\u003ecompatible JTAG programmer\/debugger\u003c\/strong\u003e is \u003cstrong\u003eneeded\u003c\/strong\u003e, see resources.\u003c\/p\u003e\n\u003cp\u003eThe AI-deck 1.1 version only has minor updates compared to the AI-deck 1.0. The Himax camera module is now the greyscale version and the GAP8 is now revision C instead of B. For more details read \u003ca href=\"https:\/\/www.bitcraze.io\/2021\/01\/ai-deck-product-update\/\" target=\"_blank\"\u003ethis\u003c\/a\u003e blog post and if the Bayer RGB version camera is wanted it can be bought stand alone here.\u003c\/p\u003e\n\u003cp\u003eFor more details, please see \u003ca title=\"Bitcraze website\" href=\"https:\/\/www.bitcraze.io\/products\/ai-deck\/\"\u003ethe product page on our web\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGAP8 Ultra-low power 8+1 core RISC-V IoT Application Processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eHimax HM01B0 – Ultra low power 320×320 grayscale camera.\u003c\/li\u003e\n\u003cli\u003e512 Mbit HyperFlash and 64 Mbit HyperRAM\u003c\/li\u003e\n\u003cli\u003eESP32 for WiFi and more (NINA-W102)\u003c\/li\u003e\n\u003cli\u003e2 x Cortex-M 10-pin JTAG for GAP8 and ESP32\u003c\/li\u003e\n\u003cli\u003eButton connected to ESP32 for UART bootloader or other action\u003c\/li\u003e\n\u003cli\u003e1 x green LED connected to GAP8 (A2)\u003c\/li\u003e\n\u003cli\u003e1 x green LED connected to ESP32 (GPIO_24)\u003c\/li\u003e\n\u003cli\u003eCan work stand alone. Power board on VCOM\u003c\/li\u003e\n\u003cli\u003eCan be mounted above or under the Crazyflie 2.X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x AI-deck 1.1\u003c\/li\u003e\n\u003cli\u003e2 x Long pin headers ( pin 15mm - plastic 4mm - pin 6mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/ai_deck_1_1\/ai_deck_1_1-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/ai_deck_1_1\/ai-deck-revc.pdf\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/products\/ai-deck\/\"\u003eWeb page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320825889051,"sku":"Bit-114992830","price":29999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/114992830-02.webp?v=1700736922"},{"product_id":"spare-part-bundle","title":"Spare part bundle","description":"\u003cp\u003eGet everything you need to keep your Crazyflie 2.X in shape even after some hard crashes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBundle content\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Crazyflie 2.X spare motor (7mm DC motors)\u003c\/li\u003e\n\u003cli\u003e2 x Crazyflie 2.X spare motor mounts pack (total of 8 motor mounts)\u003c\/li\u003e\n\u003cli\u003e1 x Crazyflie 2.X spare propeller pack (4 x CW and 4 x CCW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bitcraze","offers":[{"title":"Default Title","offer_id":47320827592987,"sku":"Bit-114991425","price":2419.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/Spare_part_bundle-2400px_1024x1024_4f44aaac-a03a-470b-9994-b93786fd0471.webp?v=1700754472"},{"product_id":"luxonis-a00483","title":"OAK-D-Lite Auto Focus","description":"\u003cp\u003e\u003cstrong\u003eOverview : \u003c\/strong\u003e OAK-D-Lite takes the affordability idea and pushes it one step forward. By having the same SpatialAI functionality as OAK-D with a smaller weight and form factor, it gives you the opportunity to create all sorts of projects. It is meant to be used by anyone, anywhere. The Swiss Army Knife of Computer Vision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Specifications :\u003c\/strong\u003eThis OAK camera uses USB-C cable for communication and power. It supports both USB2 and USB3 (5Gbps \/ 10Gbps).\u003c\/p\u003e\n\u003ctable id=\"id1\" class=\" cke_show_border\"\u003e\n\u003ccaption\u003eSensor specifications\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eStereo pair\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx214.html#imx214\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx214.html#imx214\"\u003eIMX214\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/ov7251.html#ov7251\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/ov7251.html#ov7251\"\u003eOV7251\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDFOV \/ HFOV \/ VFOV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e81° \/ 69° \/ 54°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e86° \/ 73° \/ 58°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e13MP (4208x3120)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e480P (640x480)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAF: 8cm - ∞ \u003cstrong\u003eOR\u003c\/strong\u003e FF: 50cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFixed-Focus 6.5cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e200 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eF-number\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2 ± 5%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/3.1 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/7.5 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEffective Focal Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3.37mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.3mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDistortion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 1%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 1.5%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.12µm x 1.12µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3µm x 3µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRVC2 inside :\u003c\/strong\u003e This OAK device is built on top of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRVC2\u003c\/a\u003e. Main features:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 TOPS\u003c\/strong\u003e of processing power (1.4 TOPS for AI)\u003cbr\u003e\u003cstrong\u003eRun any AI model\u003c\/strong\u003e, even custom architectured\/built ones - models need to \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\"\u003ebe converted\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003eEncoding\u003c\/strong\u003e: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003e\u003cstrong\u003eComputer vision\u003c\/strong\u003e: warp\/dewarp, resize, crop via \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\"\u003eImageManip\u003c\/a\u003e node, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\"\u003eedge detection\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\"\u003efeature tracking\u003c\/a\u003e. You can also \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\"\u003erun custom CV functions\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eStereo depth\u003c\/strong\u003e perception with filtering, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\"\u003epost-processing\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\"\u003eRGB-depth alignment\u003c\/a\u003e, and high \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003econfigurability\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eObject tracking\u003c\/strong\u003e: 2D and 3D tracking with \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\"\u003eObjectTracker\u003c\/a\u003e node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOAK-D vs OAK-D-Lite :\u003c\/strong\u003e OAK-D-Lite is smaller, lighter and uses less power; compared to OAK-D. The main differences are:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*\u003c\/strong\u003eMono cameras have lower resolution (640x480 instead of 1280x800)\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003eThere is no IMU (Inertial measurement unit) on the OAK-D-Lite, as most users don’t need it. IMUs are currently hard to come by, so the price increased significantly - and we wanted to lower the price point as much as possible.\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003eThere is no power jack, as most users just used the USB-C for power delivery, which provides 900mA at 5V and is enough for most use-cases. However some functions (e.g. inference, video encoding) can lead to large current spikes, so there is a chance hosts like RPi won’t be able to provide enough power. In that case, you should use \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM6010.html#y-adapter\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM6010.html#y-adapter\"\u003eY-adapter\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003eAdditionally, the more technical differences are the following:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRobotics Vision Core 2\u003c\/a\u003e chip-down design, instead of connecting the OAK-SoM` to the baseboard (like it is done on OAK-D)\u003cbr\u003eIn collaboration with ArduCam, we developed custom camera sensor connectors, which are shorter and take up less space\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixed-focus vs Auto-focus :\u003c\/strong\u003e When ordering the OAK-D-Lite, you can select whether you want \u003ccode\u003eFixed-focus\u003c\/code\u003e (FF) or \u003ccode\u003eAuto-focus\u003c\/code\u003e (AF) \u003cstrong\u003eon the color camera\u003c\/strong\u003e. You should select FF if you are mounting OAK camera to something that vibrates. You should select AF when you need things closer than ~50cm to be in focus. More information can be found at \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/af_ff.html#auto-focus-vs-fixed-focus\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/af_ff.html#auto-focus-vs-fixed-focus\"\u003eAuto-Focus vs Fixed-Focus\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWidth: 91 mm\u003cbr\u003eHeight: 28 mm\u003cbr\u003eLength: 17.5 mm\u003cbr\u003eBaseline: 75 mm\u003cbr\u003eWeight: 61 g\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-d-lite_dimensions.jpg\" alt=\"..\/_images\/oak-d-lite_dimensions.jpg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-d-lite_dimensions.jpg\"\u003e\u003cstrong\u003eDepth perception :\u003c\/strong\u003e This OAK camera has a baseline of 7.5cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline - more information \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eMin distance: ~20cm (480P, extended), ~35cm (480P)\u003cbr\u003eMaximal perceiving distance: ~ 19.1 meters\u003cbr\u003e\u003cstrong\u003eExtended\u003c\/strong\u003e means that StereoDepth node has \u003cstrong\u003eExtended disparity\u003c\/strong\u003e mode enabled, more information \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003ehere\u003c\/a\u003e. Maximum perceivable distance calculation \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandby: 0.6 W\u003cbr\u003eRunning depthai_demo.py: 4 W\u003cbr\u003eMax consumption: 4.5 W\u003cbr\u003eOccasional power spikes of 2W may occur when running videoEncoder and\/or Neural Network. OAK-D-Lite can be also powered off of USB3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating temperature :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have tested OAK-D-Lite with the following command which should inflict the highest consumption:\u003cbr\u003epython3 depthai_demo.py -enc color -s color left right depth\u003cbr\u003eand after 90 minutes, we received the following temperatures:\u003c\/p\u003e\n\u003cp\u003eEnclosure: 55.7 °C (thermal image below)\u003cbr\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRobotics Vision Core 2\u003c\/a\u003e: 73.53 °C\u003cbr\u003eThe operating temperature range of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRobotics Vision Core 2\u003c\/a\u003e (die temperature) is -40 °C to 105 °C. The die temperature can get to about +35°C from the ambient temperature. Note that the stable image temperature of the camera sensor is 0 °C to +50 °C (operating temperature -30 °C to +70 °C).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-d-lite-thermals.jpg\" alt=\"..\/_images\/oak-d-lite-thermals.jpg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-d-lite-thermals.jpg\"\u003e\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349104673051,"sku":"Luxonis-A00483","price":20999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00483-03.jpg?v=1701434895"},{"product_id":"luxonis-a00279","title":"OAK-FFC-3P","description":"\u003cp\u003e\u003cstrong\u003eOverview : \u003c\/strong\u003eThe \u003cstrong\u003eOAK-FFC-3P\u003c\/strong\u003e (DM1090FFC) baseboard has \u003cstrong\u003e3 FFC interfaces\u003c\/strong\u003e which allows for:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo 2-lane MIPI\u003c\/strong\u003e camera modules, eg. \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#bg0250tg\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#bg0250tg\"\u003eOAK-FFC-OV9282\u003c\/a\u003e (stereo pair)\u003cbr\u003e\u003cstrong\u003eOne 4-lane MIPI\u003c\/strong\u003e camera modules, eg. \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0249.html#bg0249\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0249.html#bg0249\"\u003eOAK-FFC-IMX378\u003c\/a\u003e RGB camera module, or additional \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#bg0250tg\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#bg0250tg\"\u003eOAK-FFC-OV9282\u003c\/a\u003e if RGB camera module is not required\u003c\/p\u003e\n\u003cp\u003eNote: If you would need 4 FFC interfaces, see \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DD2090.html#oak-ffc-4p\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DD2090.html#oak-ffc-4p\"\u003eOAK-FFC-4P\u003c\/a\u003e. Please note that only revision R1M1E1 and newer camera modules can be connected to this OAK FFC board.To see \u003cstrong\u003ewhich cameras are compatible with this OAK FFC baseboard\u003c\/strong\u003e, see the guide here: \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#oak-ffc-camera-modules\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#oak-ffc-camera-modules\"\u003eOAK FFC camera modules\u003c\/a\u003e. Some of camera modules have a \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#m12-mount-lenses\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#m12-mount-lenses\"\u003eM12 mount\u003c\/a\u003e, so you can use different lenses to get \u003cstrong\u003ecustom FoV\u003c\/strong\u003e (with \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#m12-selectable-fov\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/arducam.html#m12-selectable-fov\"\u003ewide or narrow FOV M12 lenses\u003c\/a\u003e).This board uses \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#oak-som\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#oak-som\"\u003eOAK-SoM\u003c\/a\u003e and is also compatible with RPi camera interface. For that you will need a \u003ca href=\"https:\/\/www.arducam.com\/product\/arducam-12mp-imx477-mini-high-quality-camera-with-m12-mount-lens-and-adapter-board-for-depthai\/\" data-cke-saved-href=\"https:\/\/www.arducam.com\/product\/arducam-12mp-imx477-mini-high-quality-camera-with-m12-mount-lens-and-adapter-board-for-depthai\/\"\u003eFFC from Arducam\u003c\/a\u003e, which converts 26-pin Luxonis camera pinout to 22 pin RPi camera pinout. In addition, IMU (over SPI) sensor is also added to this OAK FFC board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRVC2 inside :\u003c\/strong\u003e This OAK device is built on top of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRVC2\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 TOPS\u003c\/strong\u003e of processing power (1.4 TOPS for AI)\u003cbr\u003e\u003cstrong\u003eRun any AI model\u003c\/strong\u003e, even custom architectured\/built ones - models need to \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\"\u003ebe converted\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003eEncoding\u003c\/strong\u003e: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003e\u003cstrong\u003eComputer vision\u003c\/strong\u003e: warp\/dewarp, resize, crop via \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\"\u003eImageManip\u003c\/a\u003e node, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\"\u003eedge detection\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\"\u003efeature tracking\u003c\/a\u003e. You can also \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\"\u003erun custom CV functions\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eStereo depth\u003c\/strong\u003e perception with filtering, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\"\u003epost-processing\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\"\u003eRGB-depth alignment\u003c\/a\u003e, and high \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003econfigurability\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eObject tracking\u003c\/strong\u003e: 2D and 3D tracking with \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\"\u003eObjectTracker\u003c\/a\u003e node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard Layout :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/DM1090FFC_BOT.jpg\" alt=\"..\/_images\/DM1090FFC_BOT.jpg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/DM1090FFC_BOT.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWidth: 60 mm\u003cbr\u003eHeight: 40 mm\u003cbr\u003eLength: 22 mm (PCBA and heatsink)\u003cbr\u003eWeight: 41g (PCBA and heatsink)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-ffc-3p-dimensions.jpeg\" alt=\"..\/_images\/oak-ffc-3p-dimensions.jpeg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/oak-ffc-3p-dimensions.jpeg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3x OAK-FFC-OV9282 (DM0250TG_R1M1E1) mono camera module interfaces or\u003cbr\u003e2x OAK-FFC-OV9282 (DM0250TG_R1M1E1) and 1x OAK-FFC-IMX378 (DM0249_R1M1E1) RGB camera module interface\u003cbr\u003e5V power input via barrel jack\u003cbr\u003eUSB 3.1 Gen 1 Type-C\u003cbr\u003eInterface for \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#oak-som\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#oak-som\"\u003eOAK-SoM\u003c\/a\u003e\u003cbr\u003ePads for OAK-SoM 1.8V SPI\u003cbr\u003ePads for OAK-SoM 3.3V SDIO\u003cbr\u003ePads for OAK-SoM 1.8V Aux Signals (I2C, UART, GPIO)\u003cbr\u003e5V Fan OR USB Type-C\u003cbr\u003eDesign files produced with Altium Designer 20\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/DM1090FFC_with_cameras.jpg\" alt=\"..\/_images\/DM1090FFC_with_cameras.jpg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/DM1090FFC_with_cameras.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimal and maximal perceiving distances of the camera : \u003c\/strong\u003eMinimal depth perceiving distance of the camera depends on mono camera FOV, resolution, baseline and stereo depth mode, more info is available on the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\"\u003eStereo Depth documentation\u003c\/a\u003e.\u003cbr\u003eSince this device has modular mono cameras, you can choose a custom stereo baseline (depending on how it is set up). When using \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#oak-ffc-ov9282\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BG0250TG.html#oak-ffc-ov9282\"\u003eOAK-FFC-OV9282\u003c\/a\u003e, the formulas for min\/max depth perceiving distances are:\u003c\/p\u003e\n\u003cp\u003eMin distance (800P) = \u003ccode\u003e882.5 * baseline \/ 95\u003c\/code\u003e\u003cbr\u003eMin distance (400P) = \u003ccode\u003e441.25 * baseline \/ 95\u003c\/code\u003e\u003cbr\u003eMin distance with extended disparity (800P) = \u003ccode\u003e882.5 * baseline \/ 190\u003c\/code\u003e\u003cbr\u003eMin distance with extended disparity (400P) = \u003ccode\u003emax(441.25 * baseline \/ 190, 19.6)\u003c\/code\u003e\u003cbr\u003eMax percievable distance (using subpixel) = \u003ccode\u003ebaseline\/2 * tan((90 - 71.9\/1280) * PI\/180)\u003c\/code\u003e\u003cbr\u003eFor more information about the maximum distance see the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\"\u003eStereo Depth documentation\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGetting started :\u003c\/strong\u003e The OAK-FFC-3P is powered via USB Type-C or from a 5V, 5.5m x 2.5mm barrel jack, and interfaces to a host via USB 3.1 Gen1 Type-C. With cameras and the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#bw1099\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1099.html#bw1099\"\u003eOAK-SoM\u003c\/a\u003e, total power consumption usually stays below the 900ma specification of USB 3, but Type-C power of 1.5A or greater is recommended.Interfacing with the OAK-SoM is also possible with OAK-FFC-3P connector pads J3, J4, and J5. These pads are designed for the Amphenol\/FCI 20021121-00010T1LF or equivalent. Please refer to the schematics for pinout information. The reset button resets the OAK-SoM only. The boot button overrides boot mode to USB boot if different boot mode is set in NOR Flash and \u003ca href=\"https:\/\/github.com\/luxonis\/depthai-hardware\/tree\/master\/SoMs\/BW1099EMB\/R1M0E1\" data-cke-saved-href=\"https:\/\/github.com\/luxonis\/depthai-hardware\/tree\/master\/SoMs\/BW1099EMB\/R1M0E1\"\u003eBW1099EMB\u003c\/a\u003e SoM is used.\u003cbr\u003eThe 5V LED indicates 5V power is present on the OAK-FFC-3P. The PG LED indicates “power good” from the OAK-SoM. The “RUN” LED indicates that the OAK-SoM is not in reset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFFC cables :\u003c\/strong\u003e For FFC cables we use \u003ca href=\"https:\/\/www.molex.com\/molex\/search\/partSearch?query=15166\" data-cke-saved-href=\"https:\/\/www.molex.com\/molex\/search\/partSearch?query=15166\"\u003eMolex series 15166\u003c\/a\u003e. Along with the OAK-FFC-3P, we ship \u003cstrong\u003e26 pin count, same-sided, 152mm\u003c\/strong\u003e cables (part number \u003ca href=\"https:\/\/www.molex.com\/molex\/products\/part-detail\/cable\/0151660281\" data-cke-saved-href=\"https:\/\/www.molex.com\/molex\/products\/part-detail\/cable\/0151660281\"\u003e151660281\u003c\/a\u003e). If you would like to use \u003cstrong\u003eshorter\/longer FFC cables\u003c\/strong\u003e, you can get them \u003ca href=\"https:\/\/www.molex.com\/molex\/search\/deepSearch?pQuery=q%253D*%253A*%2540fq%253Dcollection%253Aimpulse%2540fq%253Dcollection%253Aimpulse%2540fq%253Dproductseries%253A%252215166%2522%252BOR%252Bengineeringnumber%253A%252215166%2522%2540fq%253Dcategory%253A%2522Cable%2522%2540fq%253Dcircuitsloaded%253A%252226%2522\u0026amp;currentQuery=contactlayouttype%3AA%2B%2528same%2Bside%2529\u0026amp;origin=_l1stv13w\" data-cke-saved-href=\"https:\/\/www.molex.com\/molex\/search\/deepSearch?pQuery=q%253D*%253A*%2540fq%253Dcollection%253Aimpulse%2540fq%253Dcollection%253Aimpulse%2540fq%253Dproductseries%253A%252215166%2522%252BOR%252Bengineeringnumber%253A%252215166%2522%2540fq%253Dcategory%253A%2522Cable%2522%2540fq%253Dcircuitsloaded%253A%252226%2522\u0026amp;currentQuery=contactlayouttype%3AA%2B%2528same%2Bside%2529\u0026amp;origin=_l1stv13w\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRevision info\u003c\/strong\u003e: USB designs with FFC camera boards contain 3 different iterations, below is a flowchart which tries to explain the design progress flow:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/Flowchart_FFC.jpg\" alt=\"..\/_images\/Flowchart_FFC.jpg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/Flowchart_FFC.jpg\"\u003e\u003cbr\u003e\u003cstrong\u003eNote :\u003c\/strong\u003e The first two revisions (\u003cstrong\u003eBW1092FFC\u003c\/strong\u003e and \u003cstrong\u003eDM1098FFC\u003c\/strong\u003e) were also named \u003cstrong\u003eF1\u003c\/strong\u003e, and the newest revision (\u003cstrong\u003eDM1090\u003c\/strong\u003e\u003cstrong\u003eFFC\u003c\/strong\u003e) is named \u003cstrong\u003eF2\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349104902427,"sku":"Luxonis-A00279","price":19799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00279-02.png?v=1701436063"},{"product_id":"luxonis-a00546","title":"OAK-D Pro Auto Focus","description":"\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eOAK-D Pro\u003c\/strong\u003e is an upgraded version of \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1098OAK.html#oak-d\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1098OAK.html#oak-d\"\u003eOAK-D\u003c\/a\u003e, featuring an \u003cstrong\u003eIR laser dot projector\u003c\/strong\u003e (active stereo) and \u003cstrong\u003eIR illumination LED\u003c\/strong\u003e (for night-vision). OAK-D Pro is from the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/oak-s2.html#oak-series-2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/oak-s2.html#oak-series-2\"\u003eSeries 2 of OAK cameras\u003c\/a\u003e. It’s smaller and lighter than the OAK-D.\u003cbr\u003eCompared to the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9098s2.html#oak-d-s2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9098s2.html#oak-d-s2\"\u003eOAK-D S2\u003c\/a\u003e, the only difference is the dot projector\/illumination LED (\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/oak-s2.html#pro-version\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/oak-s2.html#pro-version\"\u003ePro aspect\u003c\/a\u003e of the version). Otherwise, the PCB and enclosure are the same.\u003cbr\u003eDue to the large power consumption of dot projector\/illumination LED, a \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM6010.html#y-adapter\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM6010.html#y-adapter\"\u003eY-adapter\u003c\/a\u003e \u003cstrong\u003eis required\u003c\/strong\u003e when using these functions!\u003cbr\u003eLooking for the \u003cstrong\u003eWide FOV\u003c\/strong\u003e OAK-D Pro? You can find it \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9098prow.html#dm9098prow\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM9098prow.html#dm9098prow\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware specifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera uses USB-C cable for communication and power. It supports both USB2 and USB3 (5Gbps \/ 10Gbps).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003eAuto-Focus (AF)\u003c\/a\u003e\u003cbr\u003eFor the normal FOV version you can select either \u003cstrong\u003eFF or AF\u003c\/strong\u003e color camera, more \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/af_ff.html#auto-focus-vs-fixed-focus\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/af_ff.html#auto-focus-vs-fixed-focus\"\u003einformation here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ctable class=\"cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eStereo pair\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx378.html#imx378\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx378.html#imx378\"\u003eIMX378\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/ov9282.html#ov9282\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/ov9282.html#ov9282\"\u003eOV9282\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eShutter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003erolling\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eglobal\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFOV (D\/H\/V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e78°\/66°\/54\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e89.5°\/80°\/55°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12MP (4032x3040)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1MP (1280x800)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAF: 8cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFF: 19.6cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e120 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.55µm x 1.55µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3µm x 3µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/2.3 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/4 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow it works :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK model doesn’t have an IR filter on mono cameras (the production version will have notch IR filters at 940nm), which allows only visible light and IR light from illumination LED\/laser dot projector to the camera.\u003cstrong\u003e\u003cbr\u003eLaser dot projector\u003c\/strong\u003e projects many small dots in front of the device, which helps with disparity matching, especially for low-visual-interest surfaces (blank surfaces with little to no texture), such as a wall or floor. The technique that we use is called \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Computer_stereo_vision#Conventional_active_stereo_vision_(ASV)\" data-cke-saved-href=\"https:\/\/en.wikipedia.org\/wiki\/Computer_stereo_vision#Conventional_active_stereo_vision_(ASV)\"\u003eASV\u003c\/a\u003e - conventional Active Stereo Vision - as stereo matching is performed on the device the same way as on OAK-D (passive stereo).\u003c\/p\u003e\n\u003cp\u003eNote :\u003cstrong\u003e\u003cbr\u003eLaser dot projector and flood LED are disabled by default!\u003c\/strong\u003e That’s because most people would prefer intentionally enabling the laser dot projector when they are wearing eye safety gear.\u003cbr\u003eOn the image below there’s a blank wall with no texture. Without the dot projector, (passive) depth perception is poor. With the dot projector set to ~200mA, the (active) depth perception looks much better. If you look closely at the bottom left frame, you can see little dots all around the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood IR LED\u003c\/strong\u003e illumination allows perceiving low-light and no-light environments. You can run your AI\/CV processes on frames that are illuminated by the IR LED. Note that the color camera doesn’t perceive IR light, so you would need to use a mono camera stream for your AI\/CV processes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGetting started :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo get started with this OAK model, you first need to install \u003cstrong\u003edepthai library version 2.15 or above\u003c\/strong\u003e. You can set IR laser dot projector and illumination LED via the API as below.\u003c\/p\u003e\n\u003cpre\u003ewith dai.Device(pipeline) as device:\ndevice.setIrLaserDotProjectorBrightness(100) # in mA, 0..1200\ndevice.setIrFloodLightBrightness(0) # in mA, 0..1500\n\u003c\/pre\u003e\n\u003cp\u003eYou can set these two parameters in \u003cstrong\u003eDepthAI Demo\u003c\/strong\u003e in the \u003cem\u003eDepth\u003c\/em\u003e tab:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProjector specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eProjector Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eValue\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDot projector\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAms Belago1.1 Dot-Pattern Infrared Illuminator\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNumber of dots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e4700\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHFOI* 50%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e78 ± 7%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eVFOI* 50%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e61° ± 7%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eVSCEL wavelength\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e940nm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOperating temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e10°C to ~60°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTemperature absolute limits\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°C to ~80°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePDF\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ams.com\/documents\/20143\/4410698\/Belago1.1_DS000676_1-00.pdf\" data-cke-saved-href=\"https:\/\/ams.com\/documents\/20143\/4410698\/Belago1.1_DS000676_1-00.pdf\"\u003eClick here\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eFOI = Field of illumination\u003c\/em\u003e. Also note that in datasheet, HFOI and VFOI are switched, that’s because we mount the Belago1.1 rotated as we want greater horizontal field, to match field of cameras.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRVC2 inside :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK device is built on top of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRVC2\u003c\/a\u003e. Main features:\u003cstrong\u003e\u003cbr\u003e4 TOPS\u003c\/strong\u003e of processing power (1.4 TOPS for AI)\u003cstrong\u003e\u003cbr\u003eRun any AI model\u003c\/strong\u003e, even custom architectured\/built ones - models need to \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\"\u003ebe converted\u003c\/a\u003e.\u003cstrong\u003e\u003cbr\u003eEncoding\u003c\/strong\u003e: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cstrong\u003e\u003cbr\u003eComputer vision\u003c\/strong\u003e: warp\/dewarp, resize, crop via \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\"\u003eImageManip\u003c\/a\u003e node, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\"\u003eedge detection\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\"\u003efeature tracking\u003c\/a\u003e. You can also \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\"\u003erun custom CV functions\u003c\/a\u003e\u003cstrong\u003e\u003cbr\u003eStereo depth\u003c\/strong\u003e perception with filtering, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\"\u003epost-processing\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\"\u003eRGB-depth alignment\u003c\/a\u003e, and high \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003econfigurability\u003c\/a\u003e\u003cstrong\u003e\u003cbr\u003eObject tracking\u003c\/strong\u003e: 2D and 3D tracking with \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\"\u003eObjectTracker\u003c\/a\u003e node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 91g\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth perception :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera has a baseline of 7.5cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline - more information \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#min-stereo-depth-distance\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMin perceivable distance: ~20cm (400P, extended), ~35cm (400P \u003cstrong\u003eOR\u003c\/strong\u003e 800P, extended), ~70cm (800P)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMax perceivable distance: ~35 meters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtended\u003c\/strong\u003e means that StereoDepth node has \u003cstrong\u003eExtended disparity\u003c\/strong\u003e mode enabled, more information \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003ehere\u003c\/a\u003e. Maximum perceivable distance calculation \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#max-stereo-depth-distance\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser safety :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is classified as a Class 1 Laser Product under the EN\/IEC 60825-1, Edition 3 (2014) internationally.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDo not power on the product if any external damage was observed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not attempt to open any portion of this laser product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInvisible laser radiation when opened. Avoid direct exposure to the beam.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThere are no user serviceable parts with this laser product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eModification or service of the stereo module, specifically the infrared projector, may cause the emissions to exceed Class 1.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo magnifying optical elements, such as eye loupes and magnifiers, are allowed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not try to update camera firmware that is not officially released for specific camera module and revision.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/laser-safety.png\" alt=\"..\/_images\/laser-safety.png\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/laser-safety.png\"\u003e\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349105230107,"sku":"Luxonis-A00546","price":53399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/OAK-D-Pro_6_1100x_d0f11b8a-628d-4352-abc7-50b9cf2c5808.webp?v=1701342637"},{"product_id":"luxonis-a00567","title":"OAK-1-Lite Fixed Focus","description":"\u003cp\u003e\u003cstrong\u003eOAK-1-Lite\u003c\/strong\u003e takes the affordability idea and pushes it one step forward. By having the same AI and CV functionalities as \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1093.html#oak-1\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1093.html#oak-1\"\u003eOAK-1\u003c\/a\u003e while being more affordable, it gives you the opportunity to create all sorts of projects.\u003cbr\u003eOAK-1-Lite isn’t a standard USB camera. It’s a 4-trillion-operations-per-second AI powerhouse that performs your AI models on-board, so that your host is free to do whatever you need it to do.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHardware specifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSensor specifications\u003c\/p\u003e\n\u003ctable id=\"id1\" class=\"cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx214.html#imx214\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx214.html#imx214\"\u003eIMX214\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDFOV \/ HFOV \/ VFOV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e81° \/ 69° \/ 54°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e13MP (4208x3120)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFixed-Focus: 50cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eF-number\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2 +-5%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/3.1 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eEffective Focal Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3.37mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDistortion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 1%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.12µm x 1.12µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRVC2 inside :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK device is built on top of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRVC2\u003c\/a\u003e. Main features:\u003c\/p\u003e\n\u003cp\u003e1. 4 TOPS of processing power (1.4 TOPS for AI)\u003cbr\u003e2. Run any AI model, even custom architectured\/built ones - models need to be converted.\u003cbr\u003e3. Encoding: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003e4. Computer vision: warp\/dewarp, resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions\u003cbr\u003e5. Stereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability\u003cbr\u003e6. Object tracking: 2D and 3D tracking with ObjectTracker node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOAK-1 vs OAK-1-Lite :\u003c\/strong\u003e\u003cbr\u003eThe only difference between these two models is the color camera sensor; OAK-1-Lite uses IMX214 while \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1093.html#oak-1\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW1093.html#oak-1\"\u003eOAK-1\u003c\/a\u003e uses a higher quality color camera - IMX378. Otherwise OAK-1-Lite uses the same PCBA and enclosure as the OAK-1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight:\u003c\/strong\u003e\u003cbr\u003eWidth: 36 mm\u003cbr\u003eHeight: 54.5 mm\u003cbr\u003eLength: 27.8 mm\u003cbr\u003eWeight: 53.1 grams\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349105361179,"sku":"Luxonis-A00567","price":14799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00567-03.png?v=1701341907"},{"product_id":"luxonis-a00569","title":"OAK-D Pro PoE Auto Focus","description":"\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OAK-D Pro PoE is an upgraded version of OAK-D-PoE, featuring IR laser dot projector (active stereo) and IR illumination LED (for night-vision). It’s also smaller and lighter than the OAK-D-PoE.\u003cbr\u003eIt also has industrial M12 PoE connector (instead of RJ45) and additionally features M8 connector for IO connectivity; USB2 (D+, D-), camera IOs (FSIN, STROBE), power, and one auxiliary GPIO.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware specifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera uses Power-over-Ethernet (PoE) for communication and power. It offers full 802.3af and Class 3 PoE compliance with 1000BASE-T speeds (1 Gbps). A PoE injector\/switch is required to power the device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor specifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAuto Focus (AF) :\u003cbr\u003eFor the normal FOV version you can select either \u003cstrong\u003eFF or AF\u003c\/strong\u003e color camera.\u003c\/p\u003e\n\u003ctable class=\" cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eStereo pair\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIMX378\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eOV9282\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eShutter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003erolling\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eglobal\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFOV (D\/H\/V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e78°\/66°\/54\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e89.5°\/80°\/55°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12MP (4032x3040)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1MP (1280x800)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAF: 8cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFF: 19.6cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e120 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.55µm x 1.55µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3µm x 3µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/2.3 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/4 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow it works :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK model doesn’t have an IR filter on mono cameras (the production version will have notch IR filters at 940nm), which allows only visible light and IR light from illumination LED\/laser dot projector to the camera.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser dot projector\u003c\/strong\u003e projects many small dots in front of the device, which helps with disparity matching, especially for low-visual-interest surfaces (blank surfaces with little to no texture), such as a wall or floor. The technique that we use is called ASV- conventional active stereo vision - as stereo matching is performed on the device the same way as on OAK-D (passive stereo).\u003cbr\u003eOn the image below there’s a blank wall with no texture. Without the dot projector, (passive) depth perception is poor. With dot projector set to ~200mA the (active) depth perception looks much better. If you look closely at the bottom left frame, you can see little dots all around the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlanket IR LED\u003c\/strong\u003e illumination allows perceiving low-light and no-light environments. You can run your AI\/CV processes on frames that are illuminated by the IR LED. Note that the color camera doesn’t perceive IR light, so you would need to use a mono camera stream for your AI\/CV processes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGetting started :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo get started with this OAK model, you first need to install \u003cstrong\u003edepthai library version 2.15 or above\u003c\/strong\u003e. You can set IR laser dot projector and illumination LED via the API as below.\u003c\/p\u003e\n\u003cpre\u003ewith dai.Device(pipeline) as device:\ndevice.setIrLaserDotProjectorBrightness(100) # in mA, 0..1200\ndevice.setIrFloodLightBrightness(0) # in mA, 0..1500\n\u003c\/pre\u003e\n\u003cp\u003eYou can set these two parameters in \u003cstrong\u003eDepthAI Demo\u003c\/strong\u003e in the \u003cem\u003eDepth\u003c\/em\u003e tab:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/pro-conf.png\" alt=\"..\/_images\/pro-conf.png\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/pro-conf.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProjector specifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\" cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eProjector Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eValue\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDot projector\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAms Belago1.1 Dot-Pattern Infrared Illuminator\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNumber of dots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e4700\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHFOI* 50%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e78 ± 7%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eVFOI* 50%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e61° ± 7%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eVSCEL wavelength\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e940nm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOperating temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e10°C to ~60°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTemperature absolute limits\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°C to ~80°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eFOI = Field of illumination\u003c\/em\u003e. Also note that in datasheet, HFOI and VFOI are switched, that’s because we mount the Belago1.1 rotated as we want greater horizontal field, to match field of cameras.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMyriad X inside :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK device has on-board \u003cstrong\u003eMyriad X\u003c\/strong\u003e VPU ,\u003c\/p\u003e\n\u003cp\u003eMain features:\u003c\/p\u003e\n\u003cp\u003e4 TOPS of processing power (1.4 TOPS for AI)\u003cbr\u003eRun any AI model, even custom architectured\/built ones - models need to be converted.\u003cbr\u003eEncoding: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003eComputer vision: warp\/dewarp, resize, crop via Image manip node, edge detection,feature tracking. You can also run custom CV Functions.\u003cbr\u003eStereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability\u003cbr\u003eObject tracking: 2D and 3D tracking with Object Tracker node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary M8 connector :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/m8-connector.jpeg\" alt=\"..\/_images\/m8-connector.jpeg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/m8-connector.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable class=\" cke_show_border\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003ePin\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eFunction\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eAdditional information\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAUX GPIO 3V3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3V3 auxiliary GPIO. Pull this pin high with 10k resistor at startup for \u003cstrong\u003eUSB boot\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFSYNC ISO\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated Frame synchronization input signal for cameras\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUSB D+\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUSB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUSB D-\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUSB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eVBUSIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThis pin is used for sourcing 5V power to accessory devices connected to the M8 connector. If trying to boot the device in USB boot mode, this pin can also sink current.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStrobe ISO\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated Strobe output signal for cameras\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated GND\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated ground for Strobe\/FSYNC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGND\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eGround.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCameras also include an M8 connector cap for waterproofing in case the M8 connector wouldn’t be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth perception :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera has a baseline of 7.5cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMin perceivable distance: ~20cm (400P, extended), ~35cm (400P \u003cstrong\u003eOR\u003c\/strong\u003e 800P, extended), ~70cm (800P)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMax perceivable distance: ~35 meters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtended\u003c\/strong\u003e means that StereoDepth node has \u003cstrong\u003eExtended disparity\u003c\/strong\u003e mode enabled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaser safety :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is classified as a Class 1 Laser Product under the EN\/IEC 60825-1, Edition 3 (2014) internationally.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDo not power on the product if any external damage was observed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not attempt to open any portion of this laser product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInvisible laser radiation when opened. Avoid direct exposure to the beam.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThere are no user serviceable parts with this laser product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eModification or service of the stereo module, specifically the infrared projector, may cause the emissions to exceed Class 1.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo magnifying optical elements, such as eye loupes and magnifiers, are allowed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not try to update camera firmware that is not officially released for specific camera module and revision.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349105590555,"sku":"Luxonis-A00569","price":71999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/f_12.png?v=1701190156"},{"product_id":"luxonis-a00124","title":"OAK-1-PoE Auto Focus","description":"\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003eOAK-1-PoE\u003c\/strong\u003e baseboard offers full 802.3af, Class 3 PoE compliance with 1000BASE-T speeds. The OAK-1-PoE (SJ2096POE) baseboard has one on-board cameras which implement RGB vision, piped directly into the \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2099.html#oak-som-pro\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2099.html#oak-som-pro\"\u003eOAK-SoM-Pro\u003c\/a\u003e for depth and AI processing. The data is then output to a host via USB 3.1 Gen1 (Type-C) or via 1000BASE-T ethernet connection. The OAK-1-PoE board exposes boot selection switches, allowing the end user to boot the OAK-SoM-Pro module from USB or the on-board eMMC or NOR flash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera uses \u003cstrong\u003ePower-over-Ethernet\u003c\/strong\u003e (PoE) for communication and power. It offers full 802.3af, Class 3 PoE compliance with 1000BASE-T speeds (1 Gbps) and has a micro SD (uSD) card connector. A \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/powering_poe_devices.html#powering-poe-devices\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/powering_poe_devices.html#powering-poe-devices\"\u003ePoE injector\/switch\u003c\/a\u003e is required to power the device.\u003c\/p\u003e\n\u003ctable class=\"cke_show_border\" id=\"id1\"\u003e\n\u003ccaption\u003eSensor specifications\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx378.html#imx378\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/articles\/sensors\/imx378.html#imx378\"\u003eIMX378\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDFOV \/ HFOV \/ VFOV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e81° \/ 69° \/ 55°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12MP (4032x3040)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAuto-Focus: 8cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eF-number\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/2.3 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.55µm x 1.55µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRVC2 inside :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK device is built on top of the \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2\"\u003eRVC2\u003c\/a\u003e. Main features:\u003cbr\u003e1. 4 TOPS of processing power (1.4 TOPS for AI)\u003cbr\u003e2. Run any AI model, even custom architectured\/built ones - models need to be converted.\u003cbr\u003e3. Encoding: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003e4. Computer vision: warp\/dewarp, resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions\u003cbr\u003e5. Stereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability\u003cbr\u003e6. Object tracking: 2D and 3D tracking with ObjectTracker node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWidth: 82 mm\u003cbr\u003eHeight: 114 mm\u003cbr\u003eLength: 32 mm\u003cbr\u003eWeight: 294g\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePower usage :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower usage for OAK-1-PoE ranges between 1.94 W (standby) and 4.56 W (max consumption). More information on the power usage is below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eStandby: 1.94 W\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNormal operation (running \u003ccode\u003epython depthai_demo.py\u003c\/code\u003e): 4.20 W\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMax consumption power (running \u003ccode\u003epython depthai_demo.py -s left right color disparity rectified_left depth\u003c\/code\u003e): 4.56 W\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGetting started :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote :\u003c\/p\u003e\n\u003cp\u003eFor more information on how to start with POE devices, check our guide \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/getting-started-with-poe.html#getting-started-with-oak-poe-devices\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/guides\/getting-started-with-poe.html#getting-started-with-oak-poe-devices\"\u003eGetting started with OAK PoE devices\u003c\/a\u003e.\u003cbr\u003eThis OAK PoE camera accepts power input from he 802.3af, Class 3 PoE circuitry. It can also accect power through the on-board USB C connector - which is not expsed through the enclsoure, so enclosure needs to be removed.\u003cbr\u003eBooting can be accomplished from either the USB interface or from the eMMC or NOR flash on the OAK-SoM-Pro, and boot selection is configured with the DIP switch bank near the USB connector.\u003cbr\u003eInterfacing with the OAK-SoM-Pro is also possible with \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2098POE.html#bw2096poe\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2098POE.html#bw2096poe\"\u003ePoE Board\u003c\/a\u003e connector pads J5 and J8, which expose \u003ca data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2099.html#bw2099\" href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/BW2099.html#bw2099\"\u003eOAK-SoM-Pro\u003c\/a\u003e auxiliary I\/O and BW2099 Quad SPI, respectively. These headers are Amphenol\/FCI 20021121-00010T1LF or equivalent. Please refer to the schematics for pinout information.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe reset button resets the OAK-SoM-Pro only.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe 5V LED indicates 5V power is present on the BW2098POE.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe PG LED indicates “power good” from the OAK-SoM-Pro.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe “RUN” LED indicates that the OAK-SoM-Pro is not in reset.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCaution should be taken when handling any PoE circuit board. Do not directly touch the circuitry as potentials up to and exceeding 57V may exist. Always use electronics handling best practices.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349106278683,"sku":"Luxonis-A00124","price":47199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00124.png?v=1701342289"},{"product_id":"luxonis-oak-ffc-ov9782-w","title":"OAK-FFC-OV9782-W","description":"\u003cp\u003e\u003cstrong\u003eOverview : \u003c\/strong\u003eOAK-FFC-OV9782-W\u003cstrong\u003e \u003c\/strong\u003eis a carrier board for the OV9782\u003cstrong\u003e \u003c\/strong\u003ewide FOV camera module designed to work with \u003ca title=\"OAK-FFC-3P\" href=\"https:\/\/shop.luxonis.com\/collections\/modular-cameras\/products\/oak-ffc-3p\" target=\"_blank\" data-cke-saved-href=\"https:\/\/shop.luxonis.com\/collections\/modular-cameras\/products\/oak-ffc-3p\"\u003eOAK-FFC-3P\u003c\/a\u003e and \u003ca title=\"OAK-FFC-4P\" href=\"https:\/\/shop.luxonis.com\/collections\/modular-cameras\/products\/oak-ffc-4p\" target=\"_blank\" data-cke-saved-href=\"https:\/\/shop.luxonis.com\/collections\/modular-cameras\/products\/oak-ffc-4p\"\u003eOAK-FFC-4P\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003eSensor Specification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable id=\"id1\" class=\" cke_show_border\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eOV9782\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDFOV \/ HFOV \/ VFOV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e150°\/127°\/79.5°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1MP (1280x800)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFF: 19.6cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e120 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel Size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3µm x 3µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDistortion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 38%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/4”\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349106540827,"sku":"Luxonis-OAK-FFC-OV9782-W","price":11799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/OAK-FFC-OV9782-W-jpg.png?v=1701437508"},{"product_id":"luxonis-a00506","title":"OAK-D Pro W Dev","description":"\u003cp\u003e\u003cstrong\u003eImportant technical note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote! This product is for development purposes and has to be hand calibrated. Please see the \u003ca title=\"Calibration\" href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/calibration\/\" target=\"_blank\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/calibration\/\"\u003edocumentation\u003c\/a\u003e for more information. \u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe optics on these early development models have no filtering and are \"wide open\" in terms of spectral response - meaning they let in all visible light and all IR light.\u003c\/li\u003e\n\u003cli\u003eProduction versions will have a filter that lets in visible light, and a narrow notch around the IR laser dot projector and IR LED wavelength, both of which are 940nm.\u003c\/li\u003e\n\u003cli\u003eSo this version will (a) appear to have \"dim\" IR laser and IR LED illumination - as these absorb much ambient IR, which will overwhelm the IR laser and LED and (b) will have inferior optical performance as a result of the ultra-wide spectral input into the image sensor. The final production version will address both of these with the filtering described in `2` above.\u003c\/li\u003e\n\u003cli\u003eNonetheless, these optics give an idea of the field of view, depth, etc. It is simply likely that the IR illumination, active stereo depth, and passive depth will all perform better in the final production version in the presence of the filtering described in `2`.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you are looking for a factory-calibrated device, please see \u003ca title=\"OAK-D-Pro W\" href=\"https:\/\/shop.luxonis.com\/products\/oak-d-pro-w\" rel=\"noopener noreferrer\" target=\"_blank\" data-cke-saved-href=\"https:\/\/shop.luxonis.com\/products\/oak-d-pro-w\"\u003eOAK-D-Pro W\u003c\/a\u003e.\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349107425563,"sku":"Luxonis-A00506","price":40899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00506.jpg?v=1701421809"},{"product_id":"luxonis-a00191","title":"OAK-D-IoT-40","description":"\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003cbr\u003eThe OAK-D-IoT-40 baseboard has three on-board cameras which implement stereo and RGB vision, piped directly into the OAK-SoM-IoT for depth and AI processing. The data can be then output to a host via USB 3.1 Gen1 (Type-C) or via ESP32 WiFi interface. If you are new to OAK IOT devices, you can check Getting started with OAK IoT devices tutorial.\u003cbr\u003eThis design is one of two baseboards for the OAK-SoM-IoT, the other one being OAK-D-IOT-75. The only differnece is the the stereo baseline distance and the shape\/size of the OAK camera.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware specifications :\u003c\/strong\u003e This OAK camera uses USB-C cable for communication and power. It supports both USB2 and USB3 (5Gbps \/ 10Gbps).\u003c\/p\u003e\n\u003ctable id=\"id1\" class=\" cke_show_border\"\u003e\n\u003ccaption\u003eSensor specifications\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eCamera Specs\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eColor camera\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003cp\u003eStereo pair\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSensor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIMX378\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eOV9282\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDFOV \/ HFOV \/ VFOV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e81° \/ 69° \/ 55°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e82° \/ 72° \/ 50°\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eResolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12MP (4032x3040)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1MP (1280x800)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFocus\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAuto-Focus: 8cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFixed-Focus: 19.6cm - ∞\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMax Framerate\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e60 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e120 FPS\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eF-number\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eLens size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/2.3 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\/4 inch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePixel size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.55µm x 1.55µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3µm x 3µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMyriad X inside :\u003c\/strong\u003e This OAK device has on-board Myriad X VPU.\u003c\/p\u003e\n\u003cp\u003e4 TOPS of processing power (1.4 TOPS for AI)\u003cbr\u003eRun any AI model, even custom architectured\/built ones - models need to be converted.\u003cbr\u003eEncoding: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003cbr\u003eComputer vision: warp\/dewarp, resize, crop via \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\"\u003eImageManip\u003c\/a\u003e node, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\"\u003eedge detection\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\"\u003efeature tracking\u003c\/a\u003e. You can also \u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\"\u003erun custom CV functions\u003c\/a\u003e\u003cbr\u003eStereo depth perception with filtering, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\"\u003epost-processing\u003c\/a\u003e, \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\"\u003eRGB-depth alignment\u003c\/a\u003e, and high \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\"\u003econfigurability\u003c\/a\u003e\u003cbr\u003eObject tracking: 2D and 3D tracking with \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\" data-cke-saved-href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\"\u003eObjectTracker\u003c\/a\u003e node\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWidth: 60 mm\u003cbr\u003eHeight: 45 mm\u003cbr\u003eLength: 25 mm (including the SoM)\u003cbr\u003eWeight: 45.5g (total), 20g (PCBA), 25.5g (SoM with heatsink)\u003cimg src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/OAK-D-IoT-40_dimensions.svg\" alt=\"..\/_images\/OAK-D-IoT-40_dimensions.svg\" data-cke-saved-src=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/_images\/OAK-D-IoT-40_dimensions.svg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth perception :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis OAK camera has a baseline of 4.0cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline \u003cbr\u003eMin perceivable distance: ~20cm (400P \u003cstrong\u003eOR\u003c\/strong\u003e 800P, extended), ~37cm (800P)\u003cbr\u003eMax perceivable distance: ~21 meters\u003cbr\u003e\u003cstrong\u003eExtended\u003c\/strong\u003e means that StereoDepth node has \u003cstrong\u003eExtended disparity\u003c\/strong\u003e mode enabled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGetting started :\u003c\/strong\u003e The OAK-D-IoT-40 accepts power input from 5V barrel jack and it can also accept power from USB C connector. Booting can be accomplished from either the ESP32 or NOR flash on the BW1099EMB, boot selection is configured on BW1099EMB with BOOT resistors.\u003c\/p\u003e\n\u003cp\u003eThe reset button resets the OAK-SoM-IoT only.\u003cbr\u003eThe 5V LED indicates 5V power is present on the DM1092.\u003cbr\u003eThe PG LED indicates “power good” from the OAK-SoM-IoT.\u003cbr\u003eThe “RUN” LED indicates that the OAK-SoM-IoT is not reset.\u003c\/p\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349107458331,"sku":"Luxonis-A00191","price":34699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/A00191.jpg?v=1701434723"},{"product_id":"luxonis-oak-d-sr-ea","title":"OAK-D SR","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eOAK-D-SR\u003c\/span\u003e emphasizes improved \u003cspan\u003eshort-range\u003c\/span\u003e accuracy when compared to the standard OAK-D. To ensure the best accuracy, it's recommended to keep the depth measurement range of the OAK-D-SR between 20cm and 80cm. It's perfect for applications that require close-in depth and detail, such as quality control or automated manufacturing, and will prove especially valuable for mounting on robots or picking arms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe OAK-D-SR leverages our \u003c\/span\u003e\u003ca href=\"https:\/\/shop.luxonis.com\/products\/oak-som-pro-5-pcs\" target=\"_blank\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOAK-SoM-Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e to make a compact overall design. The use of the SoM reduces the overall design's scale, making it easier to mount or fit in various robotic processes. The design is also open-sourced, allowing for all necessary modifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMain Features:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e4 TOPS\u003c\/span\u003e\u003cspan\u003e of processing power (1.4 TOPS for AI -\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/rvc\/rvc2.html#rvc2-nn-performance\" target=\"_blank\"\u003e\u003cspan\u003e RVC2 NN Performance\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRun any AI model\u003c\/span\u003e\u003cspan\u003e, even custom architectured\/built ones (models need to\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/model_conversion\/\" target=\"_blank\"\u003e\u003cspan\u003e be converted\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eEncoding\u003c\/span\u003e\u003cspan\u003e: H.264, H.265, MJPEG - 4K\/30FPS, 1080P\/60FPS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eComputer vision\u003c\/span\u003e\u003cspan\u003e: warp (undistortion), resize, crop via\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/image_manip\" target=\"_blank\"\u003e\u003cspan\u003e ImageManip\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e node,\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/EdgeDetector\/edge_detector\" target=\"_blank\"\u003e\u003cspan\u003e edge detection\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/FeatureTracker\/feature_tracker\" target=\"_blank\"\u003e\u003cspan\u003e feature tracking\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. You can also\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/en\/latest\/pages\/tutorials\/creating-custom-nn-models\/\" target=\"_blank\"\u003e\u003cspan\u003e run custom CV functions\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eStereo depth\u003c\/span\u003e\u003cspan\u003e perception with filtering,\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/depth_post_processing\" target=\"_blank\"\u003e \u003cspan\u003epost-processing\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/samples\/StereoDepth\/rgb_depth_aligned\" target=\"_blank\"\u003e \u003cspan\u003eRGB-depth alignment\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and high\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/stereo_depth\/#currently-configurable-blocks\" target=\"_blank\"\u003e \u003cspan\u003econfigurability\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBMI270 \u003cspan\u003eIMU\u003c\/span\u003e, 6-axis sensor combining accelerometer and gyroscope\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eObject tracking\u003c\/span\u003e\u003cspan\u003e: 2D and 3D tracking with\u003c\/span\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/api\/en\/latest\/components\/nodes\/object_tracker\/\" target=\"_blank\"\u003e\u003cspan\u003e ObjectTracker\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDimension: 56x36x25.5 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 72g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349107654939,"sku":"Luxonis-OAK-D-SR-EA","price":28499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/OAK-DSR-01_720x_4934fa97-838e-45ec-bbea-21ad2539dc3c.webp?v=1701423112"},{"product_id":"luxions-mx582","title":"OAK-FFC IMX582","description":"\u003cp\u003eCamera module with \u003cspan\u003e32MP\u003c\/span\u003e attachable via flexible flat cable to any of the \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM1090.html#oak-ffc-3p\" target=\"_blank\" data-mce-fragment=\"1\"\u003eOAK-FFC 3P\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DD2090.html#oak-ffc-4p\" target=\"_blank\" data-mce-fragment=\"1\"\u003eOAK-FFC 4P\u003c\/a\u003e base boards, perfectly suited for quick prototyping.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSensor: IMX582\u003c\/li\u003e\n\u003cli\u003eType: Rolling Shutter\u003c\/li\u003e\n\u003cli\u003eDFOV \/ HFOV \/ VFOV: 71° \/ 45° \/ 55°\u003c\/li\u003e\n\u003cli\u003eResolution: \u003cspan\u003e32MP (5312x6000)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFocus: Auto-Focus: 20cm - ∞\u003c\/li\u003e\n\u003cli\u003eMax Framerate: 42 FPS\u003c\/li\u003e\n\u003cli\u003eF-number: 1.8\u003c\/li\u003e\n\u003cli\u003eLens size: 1\/2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/docs.luxonis.com\/projects\/hardware\/en\/latest\/pages\/DM0260imx582.html\" target=\"_blank\"\u003eProduct Documentation\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThe below photo was captured with 32MP, \u003cspan\u003eSee the full-resolution photos \u003ca title=\"OAK-FFC-48MP output\" href=\"https:\/\/drive.google.com\/drive\/folders\/1EY2-b7ob2weU8vFDbGWc16ru0QnZkum1?usp=share_link\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eIn the full-resolution photo, you can clearly see the car's plates parked 70 m (230 feet) away from the camera.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eDue to the current limitation of raw image processing, the original 8000x6000 px sensor image was center cropped to 5312x6000 px.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0106\/8325\/2802\/files\/image_600x600.png?v=1655399237\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Luxonis","offers":[{"title":"Default Title","offer_id":47349107753243,"sku":"Luxonis-OAK-FFC-48MP","price":19799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/files\/downloadNypssur7Bd4Nm.jpg?v=1701435912"},{"product_id":"uc32-arduino-programmable-pic32-microcontroller-board","title":"uC32: Arduino-programmable PIC32 Microcontroller Board","description":"\u003cp\u003eThe uC32 is a prototyping platform that adds the performance of the Microchip\u003csup\u003e®\u003c\/sup\u003e PIC32 microcontroller. The uC32 features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply. The board takes advantage of the powerful PIC32MX340F512 microcontroller, which features a 32-bit MIPS processor core running at 80 MHz, 512K of Flash program memory, and 32K of SRAM data memory. \u003c\/p\u003e\n\u003cp\u003eThe uC32 can be programmed using MPIDE, which supports PIC32. It contains everything needed to start developing embedded applications. In addition, the uC32 is fully compatible with the advanced Microchip MPLAB\u003csup\u003e®\u003c\/sup\u003e IDE and the PICkit3 in-system programmer\/debugger. \u003c\/p\u003e\n\u003cp\u003eThe uC32 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems. It provides 42 I\/O pins that support a number of peripheral functions, such as UART, SPI, I2C ports, and pulse-width modulated outputs. Twelve of the I\/O pins can be used as analog inputs or as digital inputs and outputs. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFor additional platform-specific support for your board, visit Digilent's forum at \u003ca href=\"https:\/\/reference.digilentinc.com\/chipkit_uc32:chipkit_uc32\"\u003eforum.digilentinc.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eProcessor\/IC:\u003cstrong\u003e \u003c\/strong\u003eMicrochip PIC32MX340F512H microcontroller\u003c\/p\u003e\n\u003cp\u003eConnector(s): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB connector for USB serial converter\u003c\/li\u003e\n\u003cli\u003e5.5mm x 2.1mm barrel connector used to power the uC32 from an external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProgramming: Programmable by MPIDE and Microchip MPLAB IDE\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePIC32MX3xx series\u003c\/li\u003e\n\u003cli\u003e512KB Flash\u003c\/li\u003e\n\u003cli\u003e32KB RAM\u003c\/li\u003e\n\u003cli\u003e80 MHz operating speed\u003c\/li\u003e\n\u003cli\u003eTwo SPI and two I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli\u003e16 channel 10-bit ADC, five PWM outputs\u003c\/li\u003e\n\u003cli\u003e42 available I\/O pins\u003c\/li\u003e\n\u003cli\u003e3.3V operating voltage\u003c\/li\u003e\n\u003cli\u003e12 analog inputs\u003c\/li\u003e\n\u003cli\u003ePC connection uses a USB A to mini-B cable (\u003cstrong\u003enot included\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e7V to 15V input voltage\u003c\/li\u003e\n\u003cli\u003e+\/-18mA DC current per pin\u003c\/li\u003e\n\u003cli\u003e75mA typical operating current\u003c\/li\u003e\n\u003cli\u003eTwo user LEDs \u003c\/li\u003e\n\u003cli\u003eProgrammable with MPIDE\u003c\/li\u003e\n\u003cli\u003eCompatible with the advanced MPLAB IDE and the PICkit 3 in-system programmer\/debugger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003euC32\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374920450331,"sku":"DG-410-254","price":3499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/chipKIT_uC32_obl_600__02806-1498601581-1280-1280nWLYPZHmvqQYE.png?v=1701856615"},{"product_id":"basys-mx3-pic32mx-trainer-board-for-embedded-systems-courses","title":"Basys MX3: PIC32MX Trainer Board for Embedded Systems Courses","description":"\u003cp\u003eThe Basys MX3 is a true MCU trainer board designed from the ground up around teaching embedded systems. Featuring the PIC32MX370 from Microchip plus an exhaustive set of peripherals, students gain exposure to a wide range of embedded systems related concepts while using a professional grade tool set. Adoption is made easy by the accompanying free and \u003ca href=\"https:\/\/reference.digilentinc.com\/reference\/microprocessor\/basys-mx3\/start#coursework\"\u003eopen-source coursework\u003c\/a\u003e, including 7 in-depth teaching units and 15 complete labs. The Basys MX3 is a versatile MCU trainer board ideal for teaching introductory embedded systems courses, or for any engineer looking to become familiar with PIC32 and Microchip toolsets.\u003c\/p\u003e\n\u003cp\u003eAlso see our associated \u003ca href=\"http:\/\/store.digilentinc.com\/basys-mx3-lab-bundle-companion-parts-kit-for-the-basys-mx3-and-pic32mx370-coursework\/\"\u003eBasys MX3 Lab Bundle\u003c\/a\u003e!\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNote: \u003cstrong\u003eEducators that have a \u003ca href=\"https:\/\/resource.digilentinc.com\/verify\"\u003everified\u003c\/a\u003e account through Digilent will have access to download the the \u003ca href=\"http:\/\/store.digilentinc.com\/embedded-systems-with-pic32mx370-and-basys-mx3-solutions\/\"\u003esolutions for the course material\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor\/IC: Microchip PIC32MX370F512L Microcontroller\u003c\/li\u003e\n\u003cli\u003eMIPS32® M4K® core runs up to 96 MHz using onboard 8 MHz oscillator\u003c\/li\u003e\n\u003cli\u003e512 KB of Program Flash Memory\u003c\/li\u003e\n\u003cli\u003e12KB of Boot Flash Memory\u003c\/li\u003e\n\u003cli\u003e128 KB of SRAM\u003c\/li\u003e\n\u003cli\u003eFour Direct Memory Access (DMA) Modules\u003c\/li\u003e\n\u003cli\u003eTwo SPI, Two I²C, and Five UART serial interfaces\u003c\/li\u003e\n\u003cli\u003eParallel Master Port (PMP) for graphics interfaces\u003c\/li\u003e\n\u003cli\u003eFive 16-bit Timers\/Counters\u003c\/li\u003e\n\u003cli\u003eFive Input Capture Modules\u003c\/li\u003e\n\u003cli\u003eFive Output Compare Modules\u003c\/li\u003e\n\u003cli\u003e85 I\/O pins\n\u003cul\u003e\n\u003cli\u003e54 pins support Peripheral Pin Select (PPS) for function remapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware\n\u003cul\u003e\n\u003cli\u003eDesigned for use with MPLAB X IDE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystem Features\n\u003cul\u003e\n\u003cli\u003e4 MB SPI Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOnboard USB UART \u003cstrong\u003e(USB Micro cable required, NOT INCLUDED)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupports baud rates up to 1.25 MBaud\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowered from USB or 5 V external power source\n\u003cul\u003e\n\u003cli\u003eStandard barrel jack for 2.0 mm internal-diameter plug\u003c\/li\u003e\n\u003cli\u003eNo jumper select required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSystem Connectivity\n\u003cul\u003e\n\u003cli\u003eUSB-UART Bridge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInteraction and Sensory Devices\n\u003cul\u003e\n\u003cli\u003e8 Slide Switches\u003c\/li\u003e\n\u003cli\u003e5 Buttons\u003c\/li\u003e\n\u003cli\u003e1 Reset Button\u003c\/li\u003e\n\u003cli\u003e8 LEDs\u003c\/li\u003e\n\u003cli\u003e1 RGB LED\u003c\/li\u003e\n\u003cli\u003eOnboard 3-axis, 12-bit accelerometer\n\u003cul\u003e\n\u003cli\u003eProgrammable Motion Detection\u003c\/li\u003e\n\u003cli\u003eI2C Interface with Programmable Interrupt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnboard FIR-compatible IrDA Module\n\u003cul\u003e\n\u003cli\u003eBuilt-in Remote Control Transmission Function\u003c\/li\u003e\n\u003cli\u003eSupports speeds up to 4 Mbps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnboard Audio Input and Output\n\u003cul\u003e\n\u003cli\u003eMEMS Microphone with Adjustable Gain\n\u003cul\u003e\n\u003cli\u003eThumbwheel potentiometer for adjusting mic volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePWM driven mono audio output with onboard speaker\n\u003cul\u003e\n\u003cli\u003eThumbwheel potentiometer for adjusting speaker volume\u003c\/li\u003e\n\u003cli\u003e3.5 mm jack for line out connection to external amplifier\/speaker system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnboard Displays\n\u003cul\u003e\n\u003cli\u003e2x16 LCD Character Display with LED backlight\u003c\/li\u003e\n\u003cli\u003e4-Digit Seven Segment Display with red LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMotor Control\n\u003cul\u003e\n\u003cli\u003eOnboard Dual H-Bridge Motor Driver\n\u003cul\u003e\n\u003cli\u003eSupports up to two 1.5 A Brushed DC Motors or one stepper motor\u003c\/li\u003e\n\u003cli\u003eSupports motor voltages up to 11 V\u003c\/li\u003e\n\u003cli\u003eTerminal block provides easy connection to motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 Servo Connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Input Control (AIC)\n\u003cul\u003e\n\u003cli\u003eThumbwheel potentiometer for varying analog input between 0 to 3.3 V\u003c\/li\u003e\n\u003cli\u003eTwo wire loops for ground and AIC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpansion Connectors\n\u003cul\u003e\n\u003cli\u003eTwo 2×6 Pmod host ports\n\u003cul\u003e\n\u003cli\u003eSPI, UART, GPIO, PWM, analog in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTerminal block for two DC motors or one stepper motor\u003c\/li\u003e\n\u003cli\u003eTwo R\/C servo connectors\u003c\/li\u003e\n\u003cli\u003eOne I²C connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDebugging\n\u003cul\u003e\n\u003cli\u003eOn-board 30-pin Analog Discovery 2 connector\u003c\/li\u003e\n\u003cli\u003eOn-board USB programmer\/debugger\n\u003cul\u003e\n\u003cli\u003eProgram\/debug the PIC32MX370 directly from MPLAB \/ MPLABX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reference.digilentinc.com\/reference\/microprocessor\/basys-mx3\/start#coursework\"\u003eSupport\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e7 free and open-source teaching units complete with 15 labs\u003c\/li\u003e\n\u003cli\u003eEnough content to support one to two semesters of undergraduate embedded systems coursework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBasys MX3 Trainer Board\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not include \u003ca href=\"https:\/\/store.digilentinc.com\/usb-a-to-micro-b-cable\/\"\u003eMicro USB Cable\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374920810779,"sku":"DG-410-336","price":8799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/BasysMX3_-_Bottom_-_600__47869-1488229731-1280-1280ipUT6xAstkTBk.png?v=1701856699"},{"product_id":"pmod-female-right-angle-6-pin-header-5-pack","title":"Pmod Female Right Angle 6-pin Header (5-pack)","description":"\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAngled headers for Pmod and breadboard connectivity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProvides easy access for test and measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShips in a pack of 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921105691,"sku":"DG-240-078","price":639.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Pmod_Female_obl_600__86077-1448060514-1280-1280e3l1HI0TWq3pb.png?v=1701856744"},{"product_id":"multi-touch-display-shield-smart-display","title":"Multi-Touch Display Shield: Smart Display","description":"\u003cp\u003eThe Multi-Touch Display Shield is a gorgeous 2.8“ touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger multi-touch support.\u003c\/p\u003e\n\u003cp\u003eThe most compelling aspect of the Multi-Touch Display Shield is the programming experience provided by its \u003ca title=\"reference:software:mtds:start\" href=\"https:\/\/reference.digilentinc.com\/reference\/software\/mtds\/start\"\u003eMulti-Touch Display System (MTDS) Firmware\u003c\/a\u003e and the associated libraries. These allow you to design sleek, stylish user interfaces quickly and with very little code. The timing dependent tasks are handled by the firmware, so integrating the display into existing projects is also a snap. Some of the key functionality provided by the libraries include the ability to draw basic shapes and text, draw images stored on microSD with binary transparency, draw buttons and easily check if they have been pressed, and check the status and location of the user's two fingers. The libraries are supported in Arduino IDE and Xilinx SDK, and have been tested with Arduino, chipKIT, and Arty host boards.\u003c\/p\u003e\n\u003cp\u003eNote: This product also comes in Pmod form factor. See the \u003ca href=\"http:\/\/store.digilentinc.com\/pmod-mtds-multi-touch-display-system\/\"\u003ePmod MTDS \u003c\/a\u003epage for more info.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.8\" QVGA (320x240) display\u003c\/li\u003e\n\u003cli\u003e16 bits per pixel color\u003c\/li\u003e\n\u003cli\u003e2 point capacitive multi-touch\u003c\/li\u003e\n\u003cli\u003e200MHz, 32-bit PIC32MZ based graphics driver\u003c\/li\u003e\n\u003cli\u003eOn-board libraries with 100+ API functions\u003c\/li\u003e\n\u003cli\u003emicroSD memory card slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e What's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne 2.8\" Multi-Touch Display Shield\u003c\/li\u003e\n\u003cli\u003eDigilent cardboard packaging with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921335067,"sku":"DG-410-317","price":6999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Multi-Touch_Display_Shield_-_Bottom_-_1000__98548-1477590324-1280-1280fiJh0U9QLD8h7.png?v=1701856803"},{"product_id":"basic-i-o-shield-input-output-expansion-add-on-board-with-oled-display","title":"Basic I\/O Shield: Input\/Output Expansion Add-on Board with OLED Display","description":"\u003cp\u003eThe Basic I\/O Shield is an input\/output expansion board designed for use with microcontroller boards such as the \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-uno32-basic-microcontroller-board-retired-see-chipkit-uc32\/\" target=\"_blank\"\u003eUno32\u003c\/a\u003e and the \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-max32-microcontroller-board-with-mega-r3-headers\/\" target=\"_blank\"\u003eMax32\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe Basic I\/O Shield is designed to provide a range of input\/output devices suitable for beginners learning about microcontrollers and various types of I\/O devices, or for use by more advanced user to provide inputs or outputs for their own projects. \u003c\/p\u003e\n\u003cp\u003eThe Basic I\/O Shield provides simple digital input devices such as switches and buttons, and digital output devices such as discrete LEDs and high current open FET drivers. It provides more advanced devices such as an I\u003csup\u003e2\u003c\/sup\u003eC EEPROM, an I\u003csup\u003e2\u003c\/sup\u003eC temperature sensor, and organic LED graphic display. A potentiometer is also provided for use as an analog input device. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUsable with either the Uno32 or the Max32\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e256Kbit I2C EEPROM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e128x32 pixel OLED graphic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI\u003csup\u003e2\u003c\/sup\u003eC temperature sensor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI\u003csup\u003e2\u003c\/sup\u003eC daisy chain connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 open drain FET drivers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAnalog potentiometer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 push buttons \u0026amp; 4 slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e8 discrete LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBasic I\/O Shield\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"videos\"\u003e\u003cstrong\u003eProduct Videos\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/24JnXJf4aoE\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921466139,"sku":"DG-410-216","price":3799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Basic-IO-Shield-bottom-600__51853-1498600826-1280-12802J5LgXfeauL4N.png?v=1701856844"},{"product_id":"pmod-shield-adapter-board-for-uno-r3-standard-to-pmod","title":"Pmod Shield: Adapter Board for Uno R3 Standard to Pmod","description":"\u003cp\u003eThe Pmod Shield is an adapter board from the Uno R3 style shield headers present on many Digilent system boards to Pmod. It provides the additional circuitry and connectors necessary to allow Digilent Pmods to be plugged directly in without the hassle of messy wires and cables. The Pmod Shield has five 2x6 Digilent Pmod ports and provides access to the I\/O available via the shield headers. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003eConnector(s):\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFive 2x6 Pmod connectors\u003c\/li\u003e\n\u003cli\u003eOne additional SPI connector\u003c\/li\u003e\n\u003cli\u003eOne I\u003csup\u003e2\u003c\/sup\u003eC daisy chain connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the uC32, WF32, Wi-FIRE, PYNQ, Arty boards\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProvides access to our full line of peripheral modules (Pmod)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFive 2x6-pin Digilent Pmod connectors with GPIO, SPI, UART, and I2C support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne additional 6-pin SPI connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne I\u003csup\u003e2\u003c\/sup\u003eC daisy chain connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePmod Shield\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921498907,"sku":"DG-410-229","price":2329.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Pmod_Shield_-_Rev_B_-_Bottom_-_600__13192-1495225282-1280-1280Pn97ahAofwxJZ.png?v=1701856870"},{"product_id":"project-starter-kit-breadboardable-component-designed-for-mcu-projects","title":"Project Starter Kit: Breadboardable Component Designed for MCU projects","description":"\u003cp\u003eThe chipKIT™ Starter Kit provides a wide range of sensors, actuators, and electronic components at a remarkably low cost, enabling the construction of an endless array of projects that can serve to inform beginners or empower experts. The kit has been designed for use with our chipKIT boards, 32-bit microcontroller-based platforms.\u003c\/p\u003e\n\u003cp\u003eThe kit's parts have been selected to facilitate the creation of fun, useful, and entertaining projects, while at the same time facilitating the exploration of multiple disciplines, from optics to mechanics, from electrical engineering to computer science. Projects can range from as simple as blinking LEDs, to performing tracking based on optical information, to much more! \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003eThis kit can be bundled along with a chipKIT \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-uno32-basic-microcontroller-board-retired-see-chipkit-uc32\/\" target=\"_blank\"\u003eUno32\u003c\/a\u003e, \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-max32-microcontroller-board-with-mega-r3-headers\/\" target=\"_blank\"\u003eMax32\u003c\/a\u003e, \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-wf32-wifi-enabled-microntroller-board-with-uno-r3-headers\/\" target=\"_blank\"\u003eWF32\u003c\/a\u003e, or \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-uc32-basic-microcontroller-board-with-uno-r3-headers\/\" target=\"_blank\"\u003euC32\u003c\/a\u003e for a discount!\u003c\/h4\u003e\n\u003ctable border=\"0\" cellspacing=\"2\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cstrong\u003eComplete parts list:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth width=\"30px\"\u003e\u003cstrong\u003eQty.\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated Circuits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eIC TCA0372, Op Amp, dual, 1A, DIP8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC NE555P, Timer, DIP8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC MCP4902-E\/P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC Darlington pair array, HV, DIP18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC L293DNE, motor driver, Quad half-bridge, DIP16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC MCP9700-E\/TO, thermal sensor, 2.3V, TO-92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC MCP6546-E\/P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC SN74HC4851N, MUX\/DEMUX, 8x1, DIP16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC 74HC7014N,112; buffer, hex schmitt trigger, DIP14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eIC SN74HC595N, 8 bit shift register, DIP16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC MCP23008-E\/P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC SN74HC139N, decoder\/DEMUX, DL 2-4L, DIP16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eIC UA78L05ACLPR, 5V regulator, 100ma, TO-92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eActive Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eTransistor ZVN2110A, N-FET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eTransistor ZVP2110A, P-FET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eDiode 1N4001, rectifier, 50PIV, 1A DO-41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eSensors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eThermistor 10K ohm, %5 NTC 450mW, radial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSensor Piezo sensor, 1.4 V\/g, SPST, solder lug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eSensor 5K-20K ohm photocell, 4.20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003ePhoto Transistor QSC114, IR Photo Trans, T1, 880nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eOpto-Electronics:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eDisplay LED, 7-segment, 4 digit, CA, 0.56, hi-bright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eDisplay LCM-S01602DSF (SC1602ZS*B-XA-GS-G01), 16x2 character, no backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eLED Straw hat Tricolor LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eLED Orange\/yellow, T 1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eLED Green, T 1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eLED Red, T 1-3\/4, with flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eLED QED123, IR Emitter, T 1-3\/4, 880nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth width=\"30px\"\u003e\u003cstrong\u003eQty.\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cstrong\u003eElectro-Mechanical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSpeaker Buzzer, 3.1KHz, 4-6V, Ext Drv, PCB Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eMechanical 1\/102 DC motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eMechanical TPRO Servo SG92R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eMechanical Stepper motor, 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSwitch TSA12111, 12mm SPST button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSwitch SPST, momentary push button, PC mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSwitch SPDT, slide, PC mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003ePotentiometer 10K ohm w\/thumbwheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eRelay JZC-11F-5VDC-1Z Relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003ePassive Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eInductor TK4460-ND, FIXED 1000UH TYPE 8RHB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eCapacitor 0.01uF, ceramic disc, radial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eCapacitor 0.1uF, ceramic disc, radial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eCapacitor 10uF, electrolytic, 50V, radial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eResistor 10K ohm, carbon film, 1\/4W, 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003eResistor 220 ohm, resistor, axial, 1\/4W, 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eResistor FSR 402 round force sensing resistor, circ w\/tab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eResistor 1.0M ohm, carbon film, 1\/4W, 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eResistor 10 Mohm Resistor, axial, 1\/4W, 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eAccessories:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eWire Kit 70 piece, 22AWG Round Tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eCable, 22AWG, 1x6 pin Red-Black-Yellow-Blue-Green-Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eKit 6 Pin Male header, 5 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eBattery Holder 4xAA Battery Holder, Wire Leads, 2 Pin MTE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSolderless Breadboard 1030 Tie-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eBox E-201 Component Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921662747,"sku":"DG-240-064","price":13639.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/chipKIT_Starter_Kit_Bttn_600__72642-1449782325-1280-1280ZmnumY9Luosc1.png?v=1701856932"},{"product_id":"wi-fire-wifi-enabled-pic32mz-microcontroller-board","title":"Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board","description":"\u003cp\u003eBuilding on the previous successes with the WF32, the Wi-FIRE uses the same 43 available I\/O pins, 12 analog inputs, 3.3 operating voltage, 4 user LEDs, potentiometer, buttons, uses MRF24 on-board wireless module, microSD Card, dedicated SPI Signals and high efficiency switching 3.3V switching power supply for low-power operation. \u003c\/p\u003e\n\u003cp\u003eWhere the boards differ is in what the PIC32MZ processor can deliver. \u003c\/p\u003e\n\u003cp\u003eThe Wi-FIRE is significantly faster than its WF32 counterpart, with 200 MHz operation speed, 2MB of Flash, 512kB RAM, High-Speed USB and a 50MHz SPI. The PIC32MZ core includes the MIPS M5150 CPU Core from \u003ca href=\"http:\/\/openocd.org\/\"\u003eOpenOCD\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe Wi-FIRE can be programmed using \u003ca href=\"http:\/\/store.digilentinc.com\/multi-platform-integrated-development-environment-mpide\/\" target=\"_blank\"\u003eMPIDE\u003c\/a\u003e and with the addition of a compatible \u003ca href=\"http:\/\/store.digilentinc.com\/chipkit-pgm-programmer-debugger-for-use-with-digilent-chipkit-platforms\/\"\u003ein-system programmer\/debugger\u003c\/a\u003e, can be used with the more fully featured\/advanced Microchip MPLAB\u003csup\u003e®\u003c\/sup\u003e X IDE.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003eProcessor\/IC:\u003c\/strong\u003e Microchip® PIC32MZ2048EFG100 microcontroller\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eConnector(s):\u003c\/strong\u003e USB A micro-B cable (USB cable not included), USB Serial Converter, microSD card connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming:\u003c\/strong\u003e MPIDE, MPLAB X (with separate programmer), OpenOCD for hardware debugging\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePIC32MZ processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2MB Flash memory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e512KB RAM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e200 MHz maximum operating speed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e50 MHz six 4-wire SPI, six UART modules, five I\u003csup\u003e2\u003c\/sup\u003eC modules, PPS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10-bit ADC module: 500 Ksps rate with one Sample and Hold (S\u0026amp;H) circuits, up to 40 analog inputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e43 available I\/O pins with on-board user interfaces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3.3V operating voltage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3.3V and 5V regulators\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e12 analog inputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePC connection uses a USB A to micro-B cable \u003cstrong\u003e(not included)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB 2.0 Full-Speed \/ Hi-Speed OTG controller with A and micro-AB connectors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMicroSD card connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFour LEDs, two Pushbuttons, one Potentiometer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFully supported by MPIDE\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor more advanced users, MPLAB X IDE is available with a separate programmer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEJTAG header for external debugging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMicrochip MRF24WG0MA WiFi module\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDSP-enhanced core: Four 64-bit accumulators, single-cycle MAC, saturating and fractional math\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e For user documentation, software, and tools support for \u003ca href=\"https:\/\/community.imgtec.com\/developers\/mips\/tools\/mips-debug-and-trace-probes\/bus-blaster\"\u003eOpenOCD\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWi-FIRE\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374921826587,"sku":"DG-410-302","price":7899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/WiFire-Oblique-600__42637-1498759104-1280-1280FZxa0Blz2Zo0y.png?v=1701856981"},{"product_id":"digilent-pro-mx7-pic32-based-embedded-systems-trainer-board","title":"Digilent Pro MX7: PIC32-based Embedded Systems Trainer Board","description":"\u003cp\u003eThe Digilent Pro MX7 is a microcontroller development board based on the Microchip\u003csup\u003e®\u003c\/sup\u003e PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of \u003ca href=\"http:\/\/store.digilentinc.com\/pmod-peripheral-modules\/\" target=\"_blank\"\u003eperipheral modules (Pmod)\u003c\/a\u003e, and is suitable for use with the Microchip MPLAB\u003csup\u003e®\u003c\/sup\u003e IDE tools. The Pro MX7 is also compatible for use with MPIDE. \u003c\/p\u003e\n\u003cp\u003eThe Pro MX7 is designed to be easy to use and suitable for use by anyone from beginners to advanced users for experimenting with embedded control and network communications application. A built-in programming\/debugging circuit compatible with the Microchip MPLAB IDE is provided, so no additional hardware is required for use with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE. \u003c\/p\u003e\n\u003cp\u003eThe Pro MX7 provides 52 I\/O pins that support a number of peripheral functions, such as UART, SPI, and I\u003csup\u003e2\u003c\/sup\u003eC ports as well as five pulse-width modulated outputs and five external interrupt inputs. Its network and communications features also include a 10\/100 Ethernet interface, Full Speed USB 2.0 OTG interface, and dual CAN network interfaces. Ten of the I\/O pins can be used as analog inputs in addition to their use as digital inputs and outputs. \u003c\/p\u003e\n\u003cp\u003eThe Pro MX7 can be powered in various ways via USB, or using an external AC-DC power adapter.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003eProcessor\/IC: Microchip PIC32MX795F512L\u003c\/h4\u003e\n\u003cp\u003eConnector(s):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 x 12-pin Pmod ports\u003c\/li\u003e\n\u003cli\u003e2 x USB ports\u003c\/li\u003e\n\u003cli\u003e1 x USB UART port\u003c\/li\u003e\n\u003cli\u003e1 x RJ45 Ethernet port\u003c\/li\u003e\n\u003cli\u003e1 x SPI ports\u003c\/li\u003e\n\u003cli\u003e2 x SPI\/UART ports\u003c\/li\u003e\n\u003cli\u003e2 x CAN ports\u003c\/li\u003e\n\u003cli\u003e2 x I\u003csup\u003e2\u003c\/sup\u003eC ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProgramming: Program using MPIDE or MPLAB IDE\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMicrochip PIC32MX795F512L\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e512KB Flash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e128KB RAM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e80 MHz maximum operating speed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFour SPI, five I\u003csup\u003e2\u003c\/sup\u003eC, and six UART serial interfaces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo CAN network controllers, five compare\/PWM outputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFive 16-bit timer\/counters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFive timer capture inputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo analog comparators\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgramming\/debugging circuit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e52 I\/O pins\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3.3V operating voltage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10 analog inputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo USB connectors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB 2.0 compliant full-speed On-The-Go (OTG) controller with dedicated DMA channel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e8 MHz oscillator\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSix 12-pin Pmod ports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10\/100 Ethernet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThree pushbuttons and four LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable with MPIDE and also MPLAB IDE\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDigilent Pro MX7\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003cli\u003eOne USB A to micro-B cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374922088731,"sku":"DG-410-296","price":9899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/ProMX7_-_All_Parts_-_600__47988-1498757768-1280-1280Vs5iRusnGq7O4.png?v=1701857028"},{"product_id":"pynq-grove-adapter-shield","title":"PYNQ Grove Adapter Shield","description":"\u003cp\u003eQuickly add Grove modules to your PYNQ projects with a choice of a Grove Shield or a Grove Adapter. The Grove System simplifies traditional electronics by removing the messy, time-consuming effort with breadboarding. The Grove system consists of a base platform and various modules with standardized connectors. Each Grove module addresses a range of functions such as simple LEDs, buttons, switches to complex servo control, heart rate sensors functions, etc. With the combination of PYNQ and Grove modules, the project possibilities are endless!\u003c\/p\u003e\n\u003cp\u003eFor support for these boards and PYNQ projects, please visit \u003ca href=\"http:\/\/pynq.io\/\"\u003ewww.pynq.io\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e PYNQ Grove System Shield Adapter PYNQ Grove System Adapter\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 662px;\" border=\"0\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 182px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 243px;\"\u003e \u003cimg style=\"height: 150px; width: 200px;\" title=\"29229092224-09702b9202-o.png\" src=\"\/\/cdn6.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/29229092224-09702b9202-o.png?t=1474564005\" alt=\"29229092224-09702b9202-o.png\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 217px;\"\u003e \u003cimg style=\"height: 90px; width: 200px;\" title=\"29229088754-4374ab734a-o.png\" src=\"\/\/cdn6.bigcommerce.com\/s-7gavg\/product_images\/uploaded_images\/29229088754-4374ab734a-o.png?t=1474564052\" alt=\"29229088754-4374ab734a-o.png\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 182px;\"\u003e\u003cstrong\u003eConnector Standard:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 243px;\"\u003e Arduino Uno R3 Layout \u003c\/td\u003e\n\u003ctd style=\"width: 217px;\"\u003e 1X6 Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 182px;\"\u003e\u003cstrong\u003e# of Grove Connectors: \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 243px;\"\u003e 16 total\u003c\/td\u003e\n\u003ctd style=\"width: 217px;\"\u003e4 total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374922842395,"sku":"DG-6003-410-018","price":1459.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/PYNQ_Shield_-_Bottom_-_600__56729-1473444252-1280-1280r2v45vYWZgwxV.png?v=1701857203"},{"product_id":"basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users","title":"Basys 3 Artix-7 FPGA Trainer Board: Recommended for Introductory Users","description":"\u003cp\u003eThe Basys 3 is an entry-level FPGA development board designed exclusively for \u003ca href=\"http:\/\/www.xilinx.com\/products\/design-tools\/vivado\/\"\u003eVivado Design Suite\u003c\/a\u003e, featuring Xilinx Artix-7 FPGA architecture. Basys 3 is the newest addition to the popular Basys line of FPGA development boards, and is perfectly suited for students or beginners just getting started with FPGA technology. The Basys 3 includes the standard features found on all Basys boards: complete ready-to-use hardware, a large collection of on-board I\/O devices, all required FPGA support circuits, a free version of development tools, and at a student-level price point. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe Basys 3 does not ship with a \u003ca href=\"http:\/\/store.digilentinc.com\/usb-a-to-micro-b-cable\/\"\u003eUSB cable\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you would like an evaluation board for academic purposes, you can apply for a donation through the \u003ca href=\"http:\/\/www.xilinx.com\/support\/university\/donation-program.html\" target=\"_blank\"\u003eXilinx University Program\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eDigilent provides students with a better representation of professional-level engineering by greatly improving the Basys feature sets. These improvements include: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMore I\/O: \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDouble the user interface switches, double the number of onboard outputs, upgraded the number of external ports (moving from 6-pin single-row Pmods to 12-pin double-row Pmods) and included for the first time on a Basys class device a USB-UART bridge. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModern Architecture and Modern Programming Challenges: \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to the migration from the Spartan-3E family to the Artix-7 class of device, the Basys 3 offers a substantial increase in hardware capabilities. With the new Artix FPGA comes 15X the logic cells (from 2,160 to 33,280) and the upgrade from multipliers to true DSP slices. It also adds over 26X the amount of RAM. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndustry's First SoC Strength Design Suite: \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe most significant change to the Basys 3 is the upgrade to Xilinx \u003ca href=\"http:\/\/www.xilinx.com\/products\/design-tools\/vivado\/\"\u003eVivado Design Suite\u003c\/a\u003e (WebPACK edition available for free download from Xilinx), the most modern design tool chain used by professional engineers worldwide. Compared to ISE\u003csup\u003e®\u003c\/sup\u003e, Vivado offers an improved user experience and expanded capabilities. These capabilities include block-based IP integration (which can reduce development time up to 10x) and the Vivado Logic\/Serial I\/O analyzer\u003cstrong\u003e*\u003c\/strong\u003e. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eDevice\/IC: \u003ca href=\"http:\/\/www.xilinx.com\/products\/silicon-devices\/fpga\/artix-7\/index.htm\" target=\"_blank\"\u003eXilinx Artix-7 FPGA (XC7A35T-1CPG236C)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eConnector(s): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB A\u003c\/li\u003e\n\u003cli\u003eUSB micro-B\u003c\/li\u003e\n\u003cli\u003eFour 12-pin Pmod ports\u003c\/li\u003e\n\u003cli\u003eVGA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProgramming:\u003cstrong\u003e \u003c\/strong\u003eDesigned exclusively for the Vivado Design Suite\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures the \u003ca href=\"http:\/\/www.xilinx.com\/products\/silicon-devices\/fpga\/artix-7\/index.htm\" target=\"_blankl\"\u003eXilinx Artix-7 FPGA\u003c\/a\u003e: XC7A35T-1CPG236C\u003c\/li\u003e\n\u003cli\u003e33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops) \u003c\/li\u003e\n\u003cli\u003e1,800 Kbits of fast block RAM \u003c\/li\u003e\n\u003cli\u003eFive clock management tiles, each with a phase-locked loop (PLL)\u003c\/li\u003e\n\u003cli\u003e90 DSP slices\u003c\/li\u003e\n\u003cli\u003eInternal clock speeds exceeding 450 MHz\u003c\/li\u003e\n\u003cli\u003eOn-chip analog-to-digital converter (XADC)\u003c\/li\u003e\n\u003cli\u003eDigilent USB-JTAG port for FPGA programming and communication\u003c\/li\u003e\n\u003cli\u003eDesigned Exclusively for \u003ca href=\"http:\/\/www.xilinx.com\/products\/design-tools\/vivado\/\"\u003eVivado Design Suite\u003c\/a\u003e (Vivado Design Suite WebPACK edition can be downloaded for free from Xilinx). Expanded features are available through purchase of the Design Edition. \u003c\/li\u003e\n\u003cli\u003eFree WebPACK™ download for standard use.\u003c\/li\u003e\n\u003cli\u003eMicro-B USB cable not included. \u003c\/li\u003e\n\u003cli\u003eSerial Flash \u003c\/li\u003e\n\u003cli\u003eUSB-UART Bridge \u003c\/li\u003e\n\u003cli\u003e12-bit VGA output \u003c\/li\u003e\n\u003cli\u003eUSB HID Host for mice, keyboards and memory sticks \u003c\/li\u003e\n\u003cli\u003e16 user switches \u003c\/li\u003e\n\u003cli\u003e16 user LEDs\u003c\/li\u003e\n\u003cli\u003e5 user pushbuttons \u003c\/li\u003e\n\u003cli\u003e4-digit 7-segment display\u003c\/li\u003e\n\u003cli\u003e4 Pmod ports: 3 Standard 12-pin \u003ca href=\"http:\/\/store.digilentinc.com\/pmod-peripheral-modules\/\"\u003ePmod ports\u003c\/a\u003e, 1 dual purpose XADC signal \/ standard Pmod port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBasys 3 FPGA development board\u003c\/li\u003e\n\u003cli\u003eCustom Digilent cardboard box with protective foam\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe Basys 3 does not include a USB cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSupport Materials:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reference.digilentinc.com\/_media\/basys3:basys3_rm.pdf\" target=\"_blank\"\u003eDatasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reference.digilentinc.com\/_media\/basys3:basys3_sch.pdf\" target=\"_blank\"\u003eSchematics (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor all other material:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reference.digilentinc.com\/basys3:basys3\" target=\"_blank\"\u003eResource Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/resource.digilentinc.com\/verify\" target=\"_blank\"\u003eGet Academic Pricing\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4 id=\"videos\"\u003e\u003cstrong\u003eProduct Video:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/XIYhc-UXNaM\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374922940699,"sku":"DG-410-183","price":19059.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Basys3_obl_2_Academic_600__55885-1458770328-1280-1280MLW6GSbv03mEv.png?v=1701857240"},{"product_id":"1-pin-mte-cable-5-pack","title":"1-pin MTE Cable (5-pack)","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6\" in length\u003c\/li\u003e\n\u003cli\u003eCan be used with any Digilent board\u003c\/li\u003e\n\u003cli\u003eIdeal for testing and verification\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips in pack of 5\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374923235611,"sku":"DG-240-005","price":579.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/1_Pin_MTE_Cable_box_600__15553-1448310089-1280-1280.png?v=1701857330"},{"product_id":"pynq-z1-python-productivity-for-zynq","title":"PYNQ-Z1 Python Productivity for Zynq","description":"\u003cp\u003eThe PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic circuits. Instead, the APSoC is programmed using Python and the code is developed and tested directly on the PYNQ-Z1. The programmable logic circuits are imported as hardware libraries and programmed through their APIs in essentially the same way that the software libraries are imported and programmed. \u003c\/p\u003e\n\u003cp\u003eThe PYNQ-Z1 board is the hardware platform for the PYNQ open-source framework. The software running on the ARM A9 CPUs includes: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeb server hosting the Jupyter Notebooks design environment\u003c\/li\u003e\n\u003cli\u003eThe IPython kernel and packages\u003c\/li\u003e\n\u003cli\u003eLinux\u003c\/li\u003e\n\u003cli\u003eBase hardware library and API for the FPGA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor designers who want to extend the base system by contributing new hardware libraries, Xilinx Vivado WebPACK tools are available free of cost. \u003c\/p\u003e\n\u003cp\u003eTo find out more about PYNQ, please see the project webpage at \u003ca href=\"http:\/\/www.pynq.io\/\"\u003ewww.pynq.io\u003c\/a\u003e. Here you will find materials to help you get started and a forum for contacting the supporting community.\u003c\/p\u003e\n\u003cp\u003eTo use the PYNQ framework - it's required to have the PYNQ-Z1 boot image, which is available from the \u003ca href=\"https:\/\/reference.digilentinc.com\/reference\/programmable-logic\/pynq-z1\/start\"\u003ePYNQ-Z1 Resource Center\u003c\/a\u003e. You can download the PYNQ-Z1 image and copy it to a microSD card, or \u003ca href=\"http:\/\/store.digilentinc.com\/pynq-version-8gb-microsd-card-with-adapter\/\"\u003epurchase a card preloaded\u003c\/a\u003e with the image. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can you do with the PYNQ-Z1?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PYNQ-Z1 board is a general purpose, programmable platform for embedded systems. Users can customize both its hardware and software for applications as diverse as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComputer vision\u003c\/li\u003e\n\u003cli\u003eIndustrial control\u003c\/li\u003e\n\u003cli\u003eThe Internet of things (IoT)\u003c\/li\u003e\n\u003cli\u003eDrones\u003c\/li\u003e\n\u003cli\u003eEncryption\u003c\/li\u003e\n\u003cli\u003eEmbedded computing acceleration\u003c\/li\u003e\n\u003cli\u003eReal-time processing and many more...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe PYNQ-Z1 natively supports multi-media applications with on-board audio and video interfaces. It is designed to be easily extensible with \u003ca href=\"http:\/\/store.digilentinc.com\/pmod-modules\/\"\u003ePmod\u003c\/a\u003e, Arduino, and \u003ca href=\"http:\/\/store.digilentinc.com\/pynq-grove-system-add-on-board\/\"\u003eGrove peripherals\u003c\/a\u003e, as well as general purpose IO pins. \u003c\/p\u003e\n\u003cp\u003eThe PYNQ-Z1 board can be also expanded with USB peripherals including WiFi, Bluetooth, and Webcams. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003eZYNQ XC7Z020-1CLG400C:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e650MHz dual-core Cortex-A9 processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDR3 memory controller with 8 DMA channels and 4 high performance AXI3 slave ports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-bandwidth peripheral controller: SPI, UART, CAN, I2C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable from JTAG, Quad-SPI flash, and microSD card\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eArtix-7 family programmable logic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e13,300 logic slices, each with four 6-input LUTs and 8 flip-flops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e630 KB of fast block RAM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e220 DSP slices\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn-chip analog-to-digital converter (XADC)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMemory:\n\u003cul\u003e\n\u003cli\u003e512MB DDR3 with 16-bit bus @ 1050Mbps\u003c\/li\u003e\n\u003cli\u003e16MB Quad-SPI Flash with factory programmed globally unique identifier (48-bit EUI-48\/64™ compatible).\u003c\/li\u003e\n\u003cli\u003eMicroSD slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: \n\u003cul\u003e\n\u003cli\u003ePowered from USB or any 7V-15V source (see recommended products)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB and Ethernet:\n\u003cul\u003e\n\u003cli\u003eUSB-JTAG Programming circuitry\u003c\/li\u003e\n\u003cli\u003eUSB-UART bridge\u003c\/li\u003e\n\u003cli\u003eUSB OTG PHY (supports host only)\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet PHY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio and Video:\n\u003cul\u003e\n\u003cli\u003eElectret microphone with pulse density modulated (PDM) output\u003c\/li\u003e\n\u003cli\u003e3.5mm mono audio output jack, pulse-width modulated (PWM) format\u003c\/li\u003e\n\u003cli\u003eHDMI sink port (input)\u003c\/li\u003e\n\u003cli\u003eHDMI source port (output)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSwitches, push-buttons, and LEDs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4 push-buttons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExpansion Connectors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTwo standard Pmod ports\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e16 Total FPGA I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eArduino\/chipKIT Shield connector\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e49 Total FPGA I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e6 Single-ended 0-3.3V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 Differential 0-1.0V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePYNQ-Z1 Board\u003cbr\u003e\u003cbr\u003e\u003cspan class=\"TextRun SCX179285992\" lang=\"EN-US\" xml:lang=\"EN-US\"\u003eWe \u003c\/span\u003e\u003cspan class=\"TextRun SCX179285992\" lang=\"EN-US\" xml:lang=\"EN-US\"\u003er\u003c\/span\u003e\u003cspan class=\"TextRun SCX179285992\" lang=\"EN-US\" xml:lang=\"EN-US\"\u003eecommend the following add-ons \u003c\/span\u003e\u003cspan class=\"TextRun SCX179285992\" lang=\"EN-US\" xml:lang=\"EN-US\"\u003efor using the PYNQ-Z1 with PYNQ:\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis board does not include a \u003ca href=\"https:\/\/store.digilentinc.com\/usb-a-to-micro-b-cable\/\"\u003emicro USB\u003c\/a\u003e and \u003ca href=\"https:\/\/store.digilentinc.com\/cat5e-ethernet-cable\/\"\u003eEthernet Cable\u003c\/a\u003e, which is required for use with the board. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374923596059,"sku":"DG-6003-410-017","price":31649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/PYNQ-Academic-Bottom-600__42717-1488572179-1280-1280vQ2BE0iPKLGcd.png?v=1701857372"},{"product_id":"arty-z7-apsoc-zynq-7000-development-board-for-makers-and-hobbyists","title":"Arty Z7: APSoC Zynq-7000 Development Board for Makers and Hobbyists","description":"\u003cp\u003eThe Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. This pairing grants the ability to surround a powerful processor with a unique set of software defined peripherals and controllers, tailored by you for whatever application is being conquered. The design process is very straightforward and provides a systematic path between defining your custom peripheral set and bringing it's functionality up to a Linux OS running on the processor. Digilent provides a number of materials and resources for the Arty Z7 that will get you up and running with this process quickly.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eArty Z7 comes in two FPGA variants: Arty Z7-10 features Xilinx XC7Z010-1CLG400C. Arty Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Arty Z7 has the features listed below:\u003c\/p\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eArty Z7-10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eArty Z7-20\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFPGA part\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXC7Z010-1CLG400C\u003c\/td\u003e\n\u003ctd\u003eXC7Z020-1CLG400C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MSPS On-chip ADC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcessor \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual ARM Cortex A9\u003c\/td\u003e\n\u003ctd\u003eDual ARM Cortex A9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLook-up Tables (LUTs)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e17,600\u003c\/td\u003e\n\u003ctd\u003e53,200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlip-flops\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35,200\u003c\/td\u003e\n\u003ctd\u003e106,400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlock RAM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e270 KB\u003c\/td\u003e\n\u003ctd\u003e630 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClock Management Tiles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Shield I\/O\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003ctd\u003e49 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eZYNQ Processor\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e650MHz dual-core Cortex-A9 processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-bandwidth peripheral controller: SPI, UART, CAN, I2C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable from JTAG, Quad-SPI flash, and microSD card\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable logic equivalent to Artix-7 FPGA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMemory\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e512MB DDR3 with 16-bit bus @ 1050Mbps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48\/64™ compatible identifier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003emicroSD slot\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePowered from USB or any 7V-15V external power source\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB and Ethernet\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGigabit Ethernet PHY\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-JTAG Programming circuitry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-UART bridge\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB OTG PHY (supports host only) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAudio and Video\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI sink port (input)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI source port (output)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePWM driven mono audio output with 3.5mm jack \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSwitches, Push-buttons, and LEDs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4 push-buttons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExpansion Connectors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTwo standard Pmod ports\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e16 Total FPGA I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eArduino\/chipKIT Shield connector\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 49 Total FPGA I\/O (see table above)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e6 Single-ended 0-3.3V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 Differential 0-1.0V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArty Board Zynq 7000 APSoC: choose between the Arty Z7-10 and Arty Z7-20\u003c\/li\u003e\n\u003cli\u003eDigilent cardboard packaging with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374924677403,"sku":"DG-410-346-10","price":25999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/ARTY-Z7_-_Bottom_-_600__54094-1476809156-1280-1280nUH9Y7BUCHO8r.png?v=1701857672"},{"product_id":"arty-z7-20-apsoc-zynq-7000-development-board-for-makers-and-hobbyists","title":"Arty Z7-20: APSoC Zynq-7000 Development Board for Makers and Hobbyists","description":"\u003cp\u003eThe Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. This pairing grants the ability to surround a powerful processor with a unique set of software defined peripherals and controllers, tailored by you for whatever application is being conquered. The design process is very straightforward and provides a systematic path between defining your custom peripheral set and bringing it's functionality up to a Linux OS running on the processor. Digilent provides a number of materials and resources for the Arty Z7 that will get you up and running with this process quickly.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eArty Z7 comes in two FPGA variants: Arty Z7-10 features Xilinx XC7Z010-1CLG400C. Arty Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Arty Z7 has the features listed below:\u003c\/p\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eArty Z7-10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eArty Z7-20\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFPGA part\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXC7Z010-1CLG400C\u003c\/td\u003e\n\u003ctd\u003eXC7Z020-1CLG400C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MSPS On-chip ADC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcessor \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual ARM Cortex A9\u003c\/td\u003e\n\u003ctd\u003eDual ARM Cortex A9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLook-up Tables (LUTs)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e17,600\u003c\/td\u003e\n\u003ctd\u003e53,200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlip-flops\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35,200\u003c\/td\u003e\n\u003ctd\u003e106,400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlock RAM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e270 KB\u003c\/td\u003e\n\u003ctd\u003e630 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClock Management Tiles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Shield I\/O\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003ctd\u003e49 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eZYNQ Processor\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e650MHz dual-core Cortex-A9 processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-bandwidth peripheral controller: SPI, UART, CAN, I2C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable from JTAG, Quad-SPI flash, and microSD card\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable logic equivalent to Artix-7 FPGA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMemory\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e512MB DDR3 with 16-bit bus @ 1050Mbps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48\/64™ compatible identifier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003emicroSD slot\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePowered from USB or any 7V-15V external power source\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB and Ethernet\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGigabit Ethernet PHY\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-JTAG Programming circuitry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-UART bridge\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB OTG PHY (supports host only) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAudio and Video\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI sink port (input)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI source port (output)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePWM driven mono audio output with 3.5mm jack \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSwitches, Push-buttons, and LEDs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4 push-buttons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExpansion Connectors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTwo standard Pmod ports\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e16 Total FPGA I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eArduino\/chipKIT Shield connector\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 49 Total FPGA I\/O (see table above)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e6 Single-ended 0-3.3V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 Differential 0-1.0V Analog inputs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e \u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArty Board Zynq 7000 APSoC: choose between the Arty Z7-10 and Arty Z7-20\u003c\/li\u003e\n\u003cli\u003eDigilent cardboard packaging with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374924972315,"sku":"DG-410-346-20","price":34529.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/ARTY-Z7_-_Obl_-_600__70201-1476809156-1280-1280bQBinp0tyJvO3.png?v=1701857726"},{"product_id":"pcam-5c-5-mp-fixed-focus-color-camera-module","title":"Pcam 5C: 5 MP Fixed Focus Color Camera Module","description":"","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374925955355,"sku":"DG-410-358","price":6459.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/Pcam_5C_-_Rev_C_-_Oblique_-_600__61571-1513293884-1280-1280.png?v=1701857948"},{"product_id":"jtag-hs3-programming-cable","title":"JTAG-HS3 Programming Cable","description":"\u003cp\u003eThe JTAG-HS3 is the newest member of our family of affordable high-speed Xilinx\u003csup\u003e®\u003c\/sup\u003e FPGA programming solutions. The HS3 builds on the successful \u003ca href=\"http:\/\/store.digilentinc.com\/jtag-hs1-programming-cable-retired\/\"\u003eJTAG-HS1\u003c\/a\u003e by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx Zynq-SOC processors. It can be attached to target boards using Xilinx's 2x7 connector*, and is compatible with all Xilinx tools, including iMPACT™, ChipScope™, and EDK. \u003c\/p\u003e\n\u003cp\u003eWhen connected to a PC via a standard A to micro-USB cable, the JTAG HS3 receives its power from USB and can be recognized as a Digilent programming cable, even if the HS3 is not attached to the target board. The JTAG bus can be shared with other devices as the HS3's signals are held in high-impedance, except when actively driven during programming. The HS3 is small and light, allowing it to be held firmly in place by the system board connector. \u003c\/p\u003e\n\u003cp\u003e* \u003cem\u003eThis is a unique programming header and is not compatible with the 1x6 MTE Digilent JTAG Connector.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e: \u003c\/h4\u003e\n\u003cp\u003eThis cable is not needed for Digilent FPGA boards as our boards are designed with integrated programming circuitry. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSmall, complete, all-in-one JTAG programming\/debugging solution for Xilinx FPGAs and SoCs\u003c\/li\u003e\n\u003cli\u003ePlugs directly into standard Xilinx JTAG header\u003c\/li\u003e\n\u003cli\u003eSeparate Vref drives JTAG signal voltages; Vref can be any voltage between 1.8V and 5V\u003c\/li\u003e\n\u003cli\u003eHigh-Speed USB2 port that can drive JTAG bus up to 30Mbit\/sec (frequency adjustable by user)\u003c\/li\u003e\n\u003cli\u003eCompatible with Xilinx ISE\u003csup\u003e®\u003c\/sup\u003e 14.1 and newer, Xilinx Vivado\u003csup\u003e®\u003c\/sup\u003e 2013.3 and newer\u003c\/li\u003e\n\u003cli\u003eUses USB Micro-B connector\u003c\/li\u003e\n\u003cli\u003eOpen drain buffer on pin 14 allows debugging software to reset the processor core of Xilinx's Zynq\u003csup\u003e®\u003c\/sup\u003e platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374927069467,"sku":"DG-410-299","price":5899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/JTAG_HS3_top_600__73115-1449187317-1280-1280zfqya2ZQdD9hv.png?v=1701858245"},{"product_id":"zybo-z7-20-zynq-7000-arm-fpga-soc-development-board","title":"Zybo Z7-20: Zynq-7000 ARM\/FPGA SoC Development Board","description":"\u003cp\u003eThe Zybo Z7 is a feature-rich, ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq-7000 family. This is the second generation update to the popular Zybo that was released in 2012. The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. The Zybo Z7 surrounds the Zynq with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer, even before considering the flexibility and power added by the FPGA. The Zybo Z7's video-capable feature set, including a MIPI CSI-2 compatible Pcam connector, HDMI input, HDMI output, and high DDR3L bandwidth, was chosen to make it an affordable solution for the high end embedded vision applications that Xilinx FPGAs are popular for. Attaching additional hardware is made easy by the Zybo Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod peripheral boards, including motor controllers, sensors, displays, and more.\u003c\/p\u003e\n\u003cp\u003eIf you are migrating from the original Zybo, please take a look at the \u003ca href=\"https:\/\/reference.digilentinc.com\/reference\/programmable-logic\/zybo-z7\/migration-guide\"\u003eMigration Guide\u003c\/a\u003e. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eZybo Z7 comes in two APSoC variants: Zybo Z7-10 features Xilinx XC7Z010-1CLG400C. Zybo Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Users will select which variant they would like at checkout. \u003c\/p\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eZybo Z7-10\u003c\/td\u003e\n\u003ctd\u003eZybo Z7-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPGA part\u003c\/td\u003e\n\u003ctd\u003eXC7Z010-1CLG400C\u003c\/td\u003e\n\u003ctd\u003eXC7Z020-1CLG400C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 MSPS On-chip ADC\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLook-up Tables (LUTs)\u003c\/td\u003e\n\u003ctd\u003e17,600\u003c\/td\u003e\n\u003ctd\u003e53,200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlip-flops\u003c\/td\u003e\n\u003ctd\u003e35,200\u003c\/td\u003e\n\u003ctd\u003e106,400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlock RAM\u003c\/td\u003e\n\u003ctd\u003e270 KB\u003c\/td\u003e\n\u003ctd\u003e630 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClock Management Tiles\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Shield I\/O\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Pmod Ports\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Connector\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZynq Heat Sink\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI CEC Support\u003c\/td\u003e\n\u003ctd\u003eTX port only\u003c\/td\u003e\n\u003ctd\u003eTX and RX ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGB LEDs\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eZYNQ Processor\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e667 MHz dual-core Cortex-A9 processor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-bandwidth peripheral controllers: SPI, UART, CAN, I2C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable from JTAG, Quad-SPI flash, and microSD card\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammable logic equivalent to Artix-7 FPGA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMemory\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 GB DDR3L with 32-bit bus @ 1066 MHz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48\/64™ compatible identifier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003emicroSD slot\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePowered from USB or any 5V external power source\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB and Ethernet\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGigabit Ethernet PHY\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-JTAG Programming circuitry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB-UART bridge\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB 2.0 OTG PHY with host and device support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAudio and Video\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePcam camera connector with MIPI CSI-2 support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI sink port (input) with CEC (Zybo Z7-20) and without CEC (Zybo Z7-10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHDMI source port (output) with CEC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAudio codec with stereo headphone, stereo line-in, and microphone jacks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSwitches, Push-buttons, and LEDs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e6 push-buttons (2 processor connected)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e5 LEDs (1 processor connected)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 RGB LEDs (Zybo Z7-20) and 1 RGB LED (Zybo Z7-10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExpansion Connectors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e6 Pmod ports (Zybo Z7-20) and 5 Pmod Ports (Zybo Z7-10)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8 Total Processor I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e40 Total FPGA I\/O (Zybo Z7-20) and 32 (Zybo Z7-10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 Analog capable 0-1.0V differential pairs to XADC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eZybo Z7-10 or Zybo Z7-20 (the Zybo Z7-20 variant comes with a heat sink)\u003c\/li\u003e\n\u003cli\u003eDigilent cardboard packaging with protective foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"videos\"\u003e\u003cstrong\u003eProduct Video:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ciframe frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/c1I2HQ5DPCo\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374927266075,"sku":"DG-410-351-20","price":49919.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/ZYBO_Z7_-_10_-_Rev_B_-_Bottom_-_Academic_-_600__33966-1506984142-1280-1280KJhWJYBvY3O0o.png?v=1701858304"},{"product_id":"jtag-hs2-programming-cable","title":"JTAG-HS2 Programming Cable","description":"\u003cp\u003eThe joint test action group (JTAG) HS2 programming cable is a high-speed programming solution for Xilinx\u003csup\u003e®\u003c\/sup\u003e field-programmable gate arrays (FPGAs). The cable is fully compatible will all Xilinx tools and can be seamlessly driven from iMPACT™, ChipScope™, and EDK. The HS2 attaches to target boards using Digilent's 6-pin, 100-mil spaced programming header or Xilinx's 2x7, 2mm connector and the included adaptor. \u003c\/p\u003e\n\u003cp\u003eThe PC powers the JTAG-HS2 through the USB port and will recognize it as a Digilent programming cable when connected to a PC, even if the cable is not attached to the target board. The HS2 has a separate Vdd pin to supply the JTAG signal buffers. The high-speed 24mA three-state buffers allow target boards to drive the HS2 with signal voltages from 1.8V to 5V and bus speeds of up to 30MBit\/sec. To function correctly, the HS2's Vdd pin must be tied to the same voltage supply that drives the JTAG port on the FPGA. \u003c\/p\u003e\n\u003cp\u003eThe JTAG bus can be shared with other devices as systems hold JTAG signals at high-impedance except when actively driven during programming. The HS2 comes included with a standard Type-A to Micro-USB cable that attaches to the end of the module opposite the system board connector. The system board connector should hold the small and light HS2 firmly in place.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis cable is not needed for Digilent FPGA boards as our boards are designed with this functionality natively.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eStats:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eProcessor\/IC: Analog Devices\u003csup\u003e®\u003c\/sup\u003e \u003ca href=\"http:\/\/www.analog.com\/ADP123AUJZ\" target=\"_blank\"\u003eADP123AUJZ\u003c\/a\u003e Linear Regulator\u003c\/p\u003e\n\u003cp\u003eConnector(s): USB2 micro-AB\u003c\/p\u003e\n\u003cp\u003eProgramming:\u003cstrong\u003e \u003c\/strong\u003eWorks with all Xilinx tools. Fully supported by \u003ca href=\"http:\/\/store.digilentinc.com\/digilent-adept-2\/\"\u003eDigilent's Adept software and Adept SDK\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog Devices \u003ca href=\"http:\/\/www.analog.com\/ADP123AUJZ\" target=\"_blank\"\u003eADP123AUJZ\u003c\/a\u003e Linear Regulator\u003c\/li\u003e\n\u003cli\u003eSmall, complete, all-in-one JTAG programming solution for Xilinx FPGAs\u003c\/li\u003e\n\u003cli\u003eCompatible with all Xilinx tools\u003c\/li\u003e\n\u003cli\u003eCompatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)\u003c\/li\u003e\n\u003cli\u003eSeparate Vref drives JTAG\/SPI signal voltages; Vref can be any voltage between 1.8V and 5V.\u003c\/li\u003e\n\u003cli\u003eHigh-Speed USB2 port that can drive JTAG\/SPI bus at up to 30Mbit\/sec\u003c\/li\u003e\n\u003cli\u003eJTAG\/SPI frequency settable by user\u003c\/li\u003e\n\u003cli\u003eUses micro-AB USB2 connector\u003c\/li\u003e\n\u003cli\u003eSPI programming solution (modes 0 and 2 up to 30Mbit\/sec, modes 1 and 3 up to 2Mbit\/sec)\u003c\/li\u003e\n\u003cli\u003eFully supported by \u003ca href=\"http:\/\/store.digilentinc.com\/digilent-adept-2\/\"\u003eDigilent's Adept software and Adept SDK\u003c\/a\u003e, allowing custom JTAG\/SPI applications to be created\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h4\u003e","brand":"Digilent","offers":[{"title":"Default Title","offer_id":47374927462683,"sku":"DG-410-249","price":6779.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/3325\/0587\/products\/JTAG_HS2_top_600__87761-1449186899-1280-1280oRD61bWVGq0ol.png?v=1701858369"}],"url":"https:\/\/mgsl.in\/collections\/popular.oembed?page=14","provider":"MG Super Labs","version":"1.0","type":"link"}