Welcome to MGSL!
Turtlebot 4 Launched! Preorder yours now!
Filter
0.95inch RGB OLED (A)
0.95inch RGB OLED (A)
Key Parameters Driver Chip SSD1331 Interface SPI Resolution 96×64 Display Size 0.95inch Colors 65K colorful Visible Angle >160° Operating Temp. (?) -20~70 Storage Temp. (?) -30~80 Operating Voltage 3.3V / 5V Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active PACKAGE CONTENT 0.95inch RGB OLED (A) x 1  

₹1,189.00*
0.95inch RGB OLED (B)
0.95inch RGB OLED (B)
Key Parameters Driver Chip SSD1331 Interface SPI Resolution 96×64 Display Size 0.95inch Colors 65K colorful Visible Angle >160° Operating Temp. (?) -20~70 Storage Temp. (?) -30~80 Operating Voltage 3.3V / 5V Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active PACKAGE CONTENT 0.95inch RGB OLED (B) x 1  

₹1,189.00*
0.96inch OLED (A)
0.96inch OLED (A)
Key Parameters Driver Chip SSD1306 Interface 3-wire SPI, 4-wire SPI, I2C Resolution 128*64 Display Size 0.96inch Colors 1/4 yellow section, 3/4 blue section Visible Angle >160° Operating Temp. (?) -20~70 Storage Temp. (?) -30~80 Operating Voltage 3.3V / 5V Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active Hardware Config Mode/InterfaceBS0/BS1DINSCK 3-wire SPI 1/0 MOSI SCLK 4-wire SPI 0/0 I2C 0/1 SDA SCL PACKAGE CONTENT 0.96inch OLED (A) x 1

₹789.00*
0.96inch OLED (B)
Key Parameters Driver Chip SSD1306 Interface 3-wire SPI, 4-wire SPI, I2C Resolution 128*64 Display Size 0.96inch Colors 1/4 yellow section, 3/4 blue section Visible Angle >160° Operating Temp. (?) -20~70 Storage Temp. (?) -30~80 Operating Voltage 3.3V / 5V Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active Hardware Config Mode/InterfaceBS0/BS1DINSCK 3-wire SPI 1/0 MOSI SCLK 4-wire SPI 0/0 I2C 0/1 SDA SCL PACKAGE CONTENT 0.96inch OLED (B) x 1 Dimensions  

₹789.00*
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
Feature Size - 1.14" Resolution - 240×135  Display Color - 65K RGB Interface - SPI Display Pane - IPS Driver - ST7789 Features At A Glance 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect SPI interface, requires minimal IO pins 4x user buttons for easy interacting Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications OPERATING VOLTAGE 2.6 ~ 5.5V RESOLUTION 240×135 pixels COMMUNICATION INTERFACE 4-wire SPI DISPLAY SIZE 24.91 × 14.86mm DISPLAY PANEL IPS PIXEL SIZE 0.1101 × 0.1035mm DRIVER ST7789 DIMENSIONS 52.00 × 25.00mm Raspberry Pi Pico Header Compatibility Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico4x User Buttons For Easy Interacting Raspberry Pi Pico is NOT included. Pinout Definition Outline Dimensions Package Content Weight: 0.011 kg Pico-LCD-1.14 x1  

₹889.00*
1.3inch OLED (A)
1.3inch OLED (A)
Key Parameters Driver Chip SH1106 Interface 3-wire SPI, 4-wire SPI, I2C Resolution 128*64 Display Size 1.3inch Colors Blue Visible Angle >160° Dimension 40.50mm*37.50mm Operating Temp. (?) -30~70 Storage Temp. (?) -30~80  Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active Hardware Config Mode/InterfaceBS0/BS1DINSCK 3-wire SPI 1/0 MOSI SCLK 4-wire SPI 0/0 I2C 0/1 SDA SCL PACKAGE CONTENT 1.3inch OLED (A) x 1  

₹939.00*
1.3inch OLED (B)
Key Parameters Driver Chip SH1106 Interface 3-wire SPI, 4-wire SPI, I2C Resolution 128*64 Display Size 1.3inch Colors Blue Visible Angle >160° Dimension 40.50mm*37.50mm Operating Temp. (?) -30~70 Storage Temp. (?) -30~80 Interface Pin No.SymbolDescription 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active Hardware Config Mode/InterfaceBS0/BS1DINSCK 3-wire SPI 1/0 MOSI SCLK 4-wire SPI 0/0 I2C 0/1 SDA SCL PACKAGE CONTENT 1.3inch OLED (B) x 1

₹939.00*
1.8inch colorful display module for micro:bit, 160x128
This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors. Tired of the 5x5 LED matrix? Time to get a tiny monitor for your micro:bit, this one would be the ideal choice. Features micro:bit edge connector, directly pluggable Embedded driver ST7735S, supports 65K colors Onboard SRAM 23LC1024, used as display cache, no more out of memory SPI interface, takes up only a few IO pins Backlight adjustment via PWM Reserved solder pads for control interface, make it easy to connect with Arduino/Nucleo boards Comes with development resources (micro:bit graphical demo/user manual, etc.) Specifications Driver: ST7735S Resolution: 160x128 Display color: RGB, 65K colors Operating voltage: 3.3V Dimension: 61mm x 51.5mm Pinouts Pinmicro:bit PinDescription VCC 3V3 Power GND GND Ground MISO P14 SPI data master input/slave output MOSI P15 SPI data master output/slave input SCK P13 SPI clock input LCD_CS P16 LCD chip selection RAM_CS P2 SRAM chip selection DC P12 LCD data/command RST P8 LCD reset BL P1 LCD backlight  PACKAGE CONTENT 1.8inch LCD for micro:bit x1 Dimensions  

₹1,979.00*
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor (C), Inertial Measurement Unit, Lower Power Consumption. 10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction. Features MPU9250: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer Internal Digital Motion Processing™ (DMP™) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc. Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices BMP280: barometric pressure sensor Embedded temperature sensor for temperature compensation Comparing with BMP180, it is lower power consumption, and higher performance You can get the 10 DOF data through I2C interface Specifications Power: 3.3V~5.5V (internal voltage regulation with low dropout) Accelerometer Resolution: 16 bit Measurement range (configurable): ±2, ±4, ±8, ±16g Operating current: 450uA Gyroscope Resolution: 16 bit Measurement range (configurable): ±250, ±500, ±1000, ±2000°/sec Operating current: 3.2mA Compass/Magnetometer Resolution: 14bit Measurement range: ±4800µT Operating current: 280uA Barometric pressure sensor Barometric resolution: 0.0016hPa Temperature resolution: 0.01°C Measurement range: 300~1100hPa (altitude: +9000m ~ -500m) Barometric relative accuracy (700hPa~900hPa, 25°C~40°C): ±0.12hPa (±1m) Operating current (1Hz update rate, ultra-low power mode): 2.8uA Interface Pin No.SymbolDescription 1 VCC 3.3V~5.5V power supply 2 GND power ground 3 SDA I2C data pin 4 SCL I2C clock pin 5 INT MPU9250 digital interrupt output 6 FSYNC MPU9250 frame sync signal PACKAGE CONTENT 10 DOF IMU Sensor (C) × 1 Dimension  

₹2,669.00*
10-DOF IMU Sensor Module for Raspberry Pi Pico, Onboard ICM20948 and LPS22HB Chip
10-DOF IMU Sensor Module for Raspberry Pi Pico, Onboard ICM20948 and LPS22HB Chip
10-DOF IMU Sensor Module For Pico Incorporates 9-Axis Motion Sensor ICM20948 And Baroceptor LPS22HB Features At A Glance The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication. Combined with the Raspberry Pi Pico, it can be used to collect environment sensing data like temperature and barometric pressure, or to easily DIY a robot that detects motion gesture and orientation. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field Onboard LPS22HB barometric pressure sensor, for sensing the atmospheric pressure of the environment Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications OPERATING VOLTAGE 5V ACCELEROMETER resolution: 16-bitmeasuring range (configurable): ±2, ±4, ±8, ±16goperating current: 68.9uA GYROSCOPE resolution: 16-bitmeasuring range (configurable): ±250, ±500, ±1000, ±2000°/secoperating current: 1.23mA MAGNETOMETER resolution: 16-bitmeasuring range: ±4900µToperating current: 90uA BAROCEPTOR measuring range: 260 ~ 1260hPameasuring accuracy (ordinary temperature): ±0.025hPameasuring speed: 1Hz - 75Hz Raspberry Pi Pico Header Compatibility Onboard Female Pin Header For Direct Attaching To Raspberry Pi PicoStackable Design Raspberry Pi Pico is NOT included. What's On Board ICM209489-axis motion sensor, I2C bus LPS22HBbarometric pressure sensor, I2C bus RT9193-333.3V linear voltage regulator LSF0204PWR4-ch voltage translator RT9193-181.8V linear voltage regulator Power indicator Raspberry Pi Pico headerfor attaching to Raspberry Pi Pico, stackable design Pinout Definition Outline Dimensions

₹2,179.00*
10.1inch Capacitive Touch LCD (D) 1024x600
10.1inch Capacitive Touch LCD (D) 1024x600
Key Parameters LCD Type TFT Interface RGB/LVDS Touch Controller FT5406 Touch Panel Type Capacitive (5 multi-touch) Backlight LED Display Size (mm) 222.72(W)×125.28(H) Dot Pitch (mm) 0.2175(W)×0.2088(H) Aspect Ratio 16 : 9 Resolution 1024 × 3(RGB) x 600 (Pixel) Power Consumption TBD Backlight Current TBD Operating Temp. (?) 0 ~ +70 RGB Interface Definition PIN NO.SYMBOLI/OFUNCTION 40 BL_VDD Power Backlight power supply connect 5V 39 BL_VDD Power Backlight power supply connect 5V 38 GND Power Power ground 37 VDD Power Power supply voltage connect 3.3V 36 R0 Input Red data (LSB) 35 R1 Input Red data 34 R2 Input Red data 33 R3 Input Red data 32 R4 Input Red data 31 R5 Input Red data 30 R6 Input Red data 29 R7 Input Red data (MSB) 28 G0 Input Green data (LSB) 27 G1 Input Green data 26 G2 Input Green data 25 G3 Input Green data 24 G4 Input Green data 23 G5 Input Green data 22 G6 Input Green data 21 G7 Input Green data (MSB) 20 B0 Input Blue data (LSB) 19 B1 Input Blue data 18 B2 Input Blue data 17 B3 Input Blue data 16 B4 Input Blue data 15 B5 Input Blue data 14 B6 Input Blue data 13 B7 Input Blue data (MSB) 12 GND Power Power ground 11 PCLK Input Pixel clock 10 LCD-BL-EN Input LCD backlight on/off, On=1; Off = 0; 9 HSYNC Input Horizontal Sync Signal 8 VSYNC Input Vertical Sync Signal 7 DE Input Data Enable 6 LCD-BL-ADJ Input LCD backlight Control (PWM control) 5 GND Power Power ground 4 CTP-SDA Input/Output CTP I2C SDA 3 CTP-SCL Input CTP I2C SCL 2 CTP-RST Input CTP Reset input 1 CTP-INT Output CTP Interrupt output LVDS Interface Definition PIN NO.SYMBOLI/OFUNCTION 40 NC   No Connector 39 VDD Power Power voltage connect 3.3V 38 VDD Power 37 VDD Power 36 GND Power Power ground 35 CTP-SCL Input CTP I2C SCL 34 CTP-SDA Input/Output CTP I2C SDA 33 LVDS-D0N Input LVDS differential data input 32 LVDS-D0P Input LVDS differential data input 31 GND Power Power ground 30 LVDS-D1N Input LVDS differential data input 29 LVDS-D1P Input LVDS differential data input 28 GND Power Power ground 27 LVDS-D2N Input LVDS differential data input 26 LVDS-D2P Input LVDS differential data input 25 GND Power Power ground 24 LVDS-CLKN Input LVDS differential clock input 23 LVDS-CLKP Input LVDS differential clock input 22 GND Power Power ground 21 LVDS-D3N Input LVDS differential data input 20 LVDS-D3P Input LVDS differential data input 19 GND Power Power ground 18 NC   No Connector 17 NC   No Connector 16 GND Power Power ground 15 NC   No Connector 14 NC   No Connector 13 GND Power Power ground 12 CTP-INT Output CTP interrupt output 11 CTP-RST Input CTP reset input 10 BL_GND Power Backlight Power ground 9 BL_GND Power 8 BL_GND Power 7 NC   No Connector 6 LCD-BL-ADJ Input LCD PWM backlight control 5 LCD-BL-EN Input LCD backlight on/off, On=1; Off=0; 4 NC   No Connector 3 BL_VDD Power Backlight power supply connect 5V 2 BL_VDD Power 1 BL_VDD Power Compatibility This item is compatible with the following products: MarsBoard RK3066 MarsBoard RK3066 Pro MarsBoard A20  

₹7,819.00*
10.1inch HDMI LCD (B) (with case) (for Europe), 1280×800, IPS
10.1inch HDMI LCD (B) (with case), 1280×800, IPS
The LCD and Control Board IPS screen,1280x800 hardware resolution Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free HDMI interface for displaying, USB interface for touch control Supports 5-level backlight adjustment Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cableBB Black: HDMI cable The Case Material : high quality black Acrylic Comes with back holder, 45° tilt angle Features mounting holes for Raspberry Pi 3B+/3B/2B/B+/A+/B, BB Black, Banana Pi Using with Game Consoles PART NUMBERMICROSOFT XBOXSONY PS4NINTENDO SWITCH DISPLAYSOUNDDISPLAYSOUNDDISPLAYSOUND 3.5inch HDMI LCD √ √ √ √ √ √ 4.3inch HDMI LCD (B) √ √ √ √ √ √ 5inch HDMI LCD (G) √ √ √ √ √ √ 5inch HDMI LCD (H) √ √ √ √ √ √ 7inch HDMI LCD √ × √ × √ × 7inch HDMI LCD (H) √ √ √ √ √ √ 10.1inch HDMI LCD √ × √ × √ × 10.1inch HDMI LCD (B) × × × × √ × 10.1inch HDMI LCD (H) √ √ × × √ √ 11.6inch HDMI LCD (H) √ √ √ √ √ √ 13.3inch HDMI LCD (H) V2 √ √ √ √ √ √ 15.6inch HDMI LCD (H) √ √ √ √ √ √ Note: Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack. External Dimension  

₹12,069.00*
10.1inch HDMI LCD (H) (with case) (For Europe), 1024x600
10.1inch HDMI LCD (H) (with case) (For Europe), 1024x600
The LCD and Control Board 1024x600 hardware resolution Capacitive touch control Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers When works with Raspberry Pi, supports Raspbian/Ubuntu, single touch, and driver free When works with BB Black, Angstrom image is provided When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free Multi video input interfaces: HDMI, VGA, and AV(CVBS) Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. Supports 100-level backlight adjustment Firmware is upgradable to support more new features (continually updated) Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cableBB Black: HDMI cable The Case Material : high quality clear Acrylic Comes with bottom holder, 45° tilt angle Features mounting holes for Raspberry Pi 3B+/3B/2B/B+/A+/B, and BB Black Using with Game Consoles PART NUMBERMICROSOFT XBOXSONY PS4NINTENDO SWITCH DISPLAYSOUNDDISPLAYSOUNDDISPLAYSOUND 3.5inch HDMI LCD √ √ √ √ √ √ 4.3inch HDMI LCD (B) √ √ √ √ √ √ 5inch HDMI LCD (G) √ √ √ √ √ √ 5inch HDMI LCD (H) √ √ √ √ √ √ 7inch HDMI LCD √ × √ × √ × 7inch HDMI LCD (H) √ √ √ √ √ √ 10.1inch HDMI LCD √ × √ × √ × 10.1inch HDMI LCD (B) × × × × √ × 10.1inch HDMI LCD (H) √ √ × × √ √ 11.6inch HDMI LCD (H) √ √ √ √ √ √ 13.3inch HDMI LCD (H) V2 √ √ √ √ √ √ 15.6inch HDMI LCD (H) √ √ √ √ √ √ Note: Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack. External Dimension Package Content 10.1inch Capacitive Touch LCD (D) x 1 HDMI LCD control board x 1 HDMI cable x 1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x 1 40-pin FFC x 1 Case for 10.1inch LCD × 1 Screws pack x 1 Bottom holder x 2 Power adapter EU standard ×1 Quick start sheet x1 1 2 3 4 5 6 7+8 9 10 11    

₹12,199.00*
10.1inch HDMI LCD (H) (with case), 1024x600
10.1inch HDMI LCD (H) (with case), 1024x600
The LCD and Control Board 1024×600 high resolution Capacitive touch control When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free When work as a computer monitor, supports Windows 10/8.1/8/7/XP, single touch, and driver free Supports BB Black, comes with Angstrom image Multi video input interfaces: HDMI, VGA, and AV(CVBS) Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. Firmware is upgradable to support more new features (continually updated) Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable The Case Material : high quality clear Acrylic Comes with bottom holder, 45° tilt angle Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, and BB Black PACKAGE CONTENT 10.1inch Capacitive Touch LCD (D) x 1 HDMI LCD control board x 1 HDMI cable x 1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x 1 40-pin FFC x 1 Case for 10.1inch LCD × 1 Screws pack x 1 Bottom holder x 2 Power adapter US standard ×1 Quick start sheet x1 External Dimension  

₹12,169.00*
10.1inch HDMI LCD, 1024×600
Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu directly) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Backlight can be turned off to lower power consumption Interface PIN NO.SYMBOLDESCRIPTION 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC 6, 9, 14, 20, 25 GND Ground 19 TP_SI SPI data input of Touch Panel 21 TP_SO SPI data output of Touch Panel 22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 23 TP_SCK SPI clock of Touch Panel 26 TP_CS Touch Panel chip selection, low active PACKAGE CONTENT 10.1inch HDMI LCD x1 HDMI connector x1 HDMI to micro HDMI connector x1 Touch pen x1 RPi screws pack (4pcs) x1 Quick start sheet x1 External Dimension  

₹9,599.00*
11.6inch HDMI LCD (H) (with case) (for EU), 1920x1080, IPS
11.6inch HDMI LCD (H) (with case) (for EU), 1920x1080, IPS
11.6" HDMI Touch Display: Size11.6" Resolution1920×1080 Display Port HDMI / VGADisplay Panel IPS Viewing Angle 178° Touch Type CapacitiveTouch Points 10-PointTouch Port USBTouch Panel Toughened                                                                                                                                                                                                                                                       GlassTouch Panel Tech Fully Laminated              OSD MenuBrightness/Contrast Sound Hi-Fi Speaker Audio Output 3.5mm Jack                                   GamingXbox360/PS4/Switch                                         Enclosure ABSCertificationCE Device & System Support:     Raspberry Pi Supports Raspbian, 10-points touch, driver freeSupports Ubuntu / Kali / WIN10 IoT, single point touch, driver freeSupports Retropie, driver free Supports all versions of Raspberry Pi Jetson Nano Supports Ubuntu, single point touch, driver free PC Supports Windows 11 / 10 / 8.1 / 8 / 7, 10-points touch, driver free Game Console Xbox360, PS4, Switch... Connection Examples: Working With Raspberry Pi 4 Working With Raspberry Pi Zero W Working With AI Computer Jetson Nano Working With Mini PC Display: IPS Panel Touch Control:   1) up to 10-points touch, depending on the operating system. 2) up to 6H hardness toughened glass panel. 3) fully laminated screen, better display experience, dust-proof. Audio Feature:   Enjoy Gaming:   Appearance And Dimensions: Features: 11.6inch IPS screen,1920x1080 hardware resolution Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output Embedded ferrite Hi-Fi speaker Also supports VGA input (specific cable is required and should be purchased separately) 75x75mm spacing mounting holes (M4 screw hole) for general wall mount Comes with 75° tilt angle stand Using with Game Consoles: PART NUMBERMICROSOFT XBOXSONY PS4NINTENDO SWITCH DISPLAYSOUNDDISPLAYSOUNDDISPLAYSOUND 3.5inch HDMI LCD √ √ √ √ √ √ 4.3inch HDMI LCD (B) √ √ √ √ √ √ 5inch HDMI LCD (G) √ √ √ √ √ √ 5inch HDMI LCD (H) √ √ √ √ √ √ 7inch HDMI LCD √ × √ × √ × 7inch HDMI LCD (H) √ √ √ √ √ √ 10.1inch HDMI LCD √ × √ × √ × 10.1inch HDMI LCD (B) × × × × √ × 10.1inch HDMI LCD (H) √ √ × × √ √ 11.6inch HDMI LCD (H) √ √ √ √ √ √ 13.3inch HDMI LCD (H) V2 √ √ √ √ √ √ 15.6inch HDMI LCD (H) √ √ √ √ √ √ Note: Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.

₹17,209.00*
11.6inch HDMI LCD (H) (with case), 1920x1080, IPS
11.6inch HDMI LCD (H) (with case), 1920x1080, IPS
Features 11.6inch IPS screen,1920x1080 high resolution Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output Embedded ferrite Hi-Fi speaker Also supports VGA input (specific cable is required and should be purchased separately) 75x75mm spacing mounting holes (M4 screw hole) for general wall mount Comes with 75° tilt angle stand PACKAGE CONTENT 11.6inch HDMI LCD (H) (with case) x1 Ring stand x1 Power adapter 12V x1 HDMI cable x1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x1 External Dimension  

₹17,209.00*
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface. This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) Specifications Operating voltage: 5V Interface: USB/SPI/I80/I2C Outline dimension: 218.8mm × 156.425mm × 1.15mm Display size: 202.8mm × 139.425mm Dot pitch: 0.169 × 0.169 Resolution: 1200 × 825 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: <1s Total refresh power: 0.6W(typ.) Total standby power: 0.3W(typ.) Viewing angle: >170° SPI Pinouts SymbolDescription 5V Power input GND Ground MISO SPI MISO pin MOSI SPI MOSI pin SCK SPI SCK pin CS SPI chip selection, low active RST External reset, low active HRDY Busy status output, low active e-Paper IT8951 Driver HAT Dimensions PACKAGE CONTENT 9.7inch e-Paper x1 e-Paper IT8951 Driver HAT x1 9.7inch e-Paper Adapter x1 33PIN FFC (same side contact) x1 USB type A plug to micro B plug cable x1 PH2.0 20cm 8Pin x1 RPi screws pack (2pcs) x1  

₹17,509.00*
1200x825, 9.7inch E-Ink raw display
1200x825, 9.7inch E-Ink raw display
1200x825, 9.7inch E-Ink raw display, parallel port, without PCB. This is an E-Ink raw display, 9.7inch, 1200x825 resolution, communicating via parallel port. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/STM32) Specifications Operating voltage: 5V Interface: parallel port Outline dimension: 218.8mm × 156.425mm × 1.15mm Display size: 202.8mm × 139.425mm Dot pitch: 0.169 × 0.169 Resolution: 1200 × 825 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: <1s Viewing angle: >170° PACKAGE CONTENT Note: This is a raw display, for easy testing and comparing, please consider the one with driver board: 9.7inch e-Paper HAT 9.7inch e-Paper x1    

₹13,159.00*
128x128, 1.44inch LCD display HAT for Raspberry Pi
128x128, 1.44inch LCD display HAT for Raspberry Pi
This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice. Features Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W 1x joystick (5-position), 3x pushbuttons, handy and useful Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Driver: ST7735S Interface: SPI Display color: RGB, 65K color Resolution: 128x128 Backlight: LED Operating voltage: 3.3V Interface SymbolRaspberry Pi Pin (BCM)Description KEY1 P21 Button 1/GPIO KEY2 P20 Button 2/GPIO KEY3 P16 Button 3/GPIO Joystick Up P6 Joystick Up Joystick Down P19 Joystick Down Joystick Left P5 Joystick Left Joystick Right P26 Joystick Right Joystick Press P13 Joystick Press SCLK P11/SCLK SPI clock input MOSI P10/MOSI SPI data input DC P25 Data/Command selection (high for data, low for command) CS P8/CE0 Chip selection, low active RST P27 Reset, low active BL P24 Backlight PACKAGE CONTENT 1.44inch LCD HAT x1 RPi screws pack (2pcs) x1 Dimensions  

₹1,189.00*
128x128, General 1.5inch OLED display Module
128x128, General 1.5inch OLED display Module
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface. Features 128x128 high resolution 16 gray scale, better display effect Supports SPI or I2C interface, configured via onboard resistor Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Driver: SSD1327 Interface: SPI / I2C Display color: White Gray scale: 16 Resolution: 128x128 (most other competitive products are typically 128x64) Viewing angle: >160° Operating voltage: 3.3V / 5V Dimension: 44.5 x 37 (mm) Interface SymbolDescription VCC Power (3.3~5V input) GND Ground DIN Data input CLK Clock data input CS Chip selection, low active DC Data/Command selection (high for data, low for command) RST Reset, low active There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:  BSCSDCDINCLK 4-wire SPI 0 Chip select Data/Command MOSI SCK I2C 1 NC I2C address selection SDA SCL Dimensions PACKAGE CONTENT 1.5inch OLED Module x1 PH2.0 7Pin x1  

₹1,289.00*
128x128, General 1.5inch RGB OLED display Module, 16-bit high color
128x128, General 1.5inch RGB OLED display Module, 16-bit high color
  This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface. Features 128x128 high resolution, 65K colors, clearly displays colorful images Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Driver: SSD1351 Interface: 4-wire SPI, 3-wire SPI Display color: RGB, 65K colors Resolution: 128x128 Viewing angle: >160° Operating voltage: 3.3V / 5V Dimension: 44.5 x 37 (mm) Interface SYMBOLDESCRIPTION VCC Power (3.3~5V input) GND Ground DIN Data input CLK Clock data input CS Chip selection, low active DC 4-wire SPI: Data/Command selection (high for data, low for command)3-wire SPI: Connects to GND, keeps low RST Reset, low active There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:  BSDC 4-wire SPI 0 DC 3-wire SPI 1 Connects to GND PACKAGE CONTENT 1.5inch RGB OLED Module x1 PH2.0 7Pin x1 Dimensions   

₹1,649.00*
128x160, General 1.8inch LCD display Module
128x160, General 1.8inch LCD display Module
This is a general LCD display Module, 1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface. Features SPI interface, requires minimum GPIO for controlling Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Driver: ST7735S Interface: SPI Display color: RGB, 65K color Resolution: 128x160 Backlight: LED Operating voltage: 3.3V Interface SymbolDescription VCC Power (3.3V input) GND Ground DIN SPI data input CLK SPI clock input CS Chip selection, low active DC Data/Command selection (high for data, low for command) RST Reset, low active BL Backlight PACKAGE CONTENT 1.8inch LCD Module x1 PH2.0 20cm 8Pin x1 Dimensions  

₹889.00*
128x32, General 0.91inch OLED display Module
128x32, General 0.91inch OLED display Module
This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Features 0.91inch small form factor 128x32 high resolution I2C interface, requires only two signal pins Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Driver: SSD1306 Interface: I2C Display color: White Resolution: 128x32 Viewing angle: >160° Operating voltage: 3.3V / 5V Dimension: 36 x 12.5 (mm) Interface SymbolDescription VCC Power (3.3~5V input) GND Ground SDA Data input SCL Clock input PACKAGE CONTENT 0.91inch OLED Module x1 PH2.0 4Pin x1 Dimensions  

₹699.00*