Welcome to MGSL!
Turtlebot 4 Launched! Preorder yours now!
Filter
Maxbotics MB1414 USB-ProxSonar-EZ1
Maxbotics MB1414 USB-ProxSonar-EZ1
Features of the MB1414, USB-ProxSonar-EZ1, include one-inch resolution, both proximity and range information for the nearest detectable target, and serial data over an easy to use USB interface. The USB-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The USB-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ’s detection zone. The MB1414 has a detection zone of ~5 feet. The MB1414 will allow for 8+ simultaneous sensors depending on sensor mounting and environment. Specifications USB interface ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Resolution of 1 inch Maximum Range of 125 inches (318 cm) Detection zone range of 60 inches (152 cm) 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Small, light weight module Designed for easy integration into your project or product Longest range detection zone  

₹4,419.00*
MB7480 4-20HR-MaxSonar-WRI
MaxBotix 4-20HR-MaxSonar-WRI
Features of the weather resistant MB7480, 4-20HR-MaxSonar-WRI, include millimeter resolution, short to long distance detection, range information from 500mm to 5000mm for the nearest detectable target, a 7.5Hz read rate, and the industry standard 20-4mA output where 20mA is minimum range and 4mA is maximum range. The MB7480 from the 4-20HR-MaxSonar-WR line of outdoor sensors is a rugged ultrasonic sensor component module. This sensor comes in a compact and robust PVC housing which meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings (this product has multiple housing options available). The 4-20HR-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones. In addition, the MB7480 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Variations on this sensor model MB7460 inverted output, 4-20mA, version of this sensor. Models with additional chemical resistance are available The F-Option (IP68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP68) when ordering. Specifications Resolution of ~1.6mm Analog current output of 4-20mA 7.5Hz read rate 42kHz ultrasonic sensor measures distance to objects RoHS compliant CE compliant Internal or external temperature compensation Virtually no sensor dead zone, objects closer than 50cm typically range as 50cm Maximum Range of 5-meters (196 inches) Operates from 10V-32VDC <40mA average current requirement Small, light‑weight module Designed for easy integration into your project or product Operational temperature -40°C to +65°C (-40°F to +149°F) Real-time automatic calibration (voltage, humidity, and ambient noise) Firmware filtering for excellent noise tolerance and clutter rejection Weather resistant (IP67), optional chemical resistant F-Option Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4-inch National Pipe Thread Straight) Long, narrow detection zone Base sensor that is great for application testing 20mA is the minimum reported range and 4mA is maximum reported range  

₹17,699.00*
MB7489 4-20HR-MaxSonar-WRMI
MaxBotix 4-20HR-MaxSonar-WRMI
Features of the weather resistant MB7489, 4-20HR-MaxSonar-WRMI, include millimeter resolution, short to long distance detection, range information from 500mm to 5000mm to the target with the largest acoustic return, a 7.5Hz read rate, and the industry standard 20-4mA output where 20mA is minimum range and 4mA is maximum range. The MB7489 from the 4-20HR-MaxSonar-WR line of outdoor sensors is a rugged ultrasonic sensor component module. This sensor comes in a compact and robust PVC housing which meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings (this product has multiple housing options available). The 4-20HR-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones. The MB7489 is designed to report the distance to the largest acoustic return while ignoring smaller targets. When targets are of similar amplitude reflections, preference is given to the closest target. This gives users the flexibility to consistently detect larger targets in the presence of clutter and noise. If the largest target is removed from the field of view, the MB7489 will switch to the target that gives the next largest detectable return. This filtering makes the MB7489 one of our most advanced sensors for outdoor tank and bin applications. In addition, the MB7489 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Variations on this sensor model MB7469 an inverted output, 4-20mA, version of this sensor. Models with additional chemical resistance are available The F-Option (IP68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP68) when ordering. Specifications Resolution of ~1.6mm Analog current output of 4-20mA 7.5Hz read rate 42kHz ultrasonic sensor measures distance to objects RoHS compliant CE compliant Internal or external temperature compensation Virtually no sensor dead zone, objects closer than 50cm typically range as 50cm Maximum Range of 5-meters (196 inches) Operates from 10V-32VDC <40mA average current requirement Small, light‑weight module Designed for easy integration into your project or product Operational temperature -40°C to +65°C (-40°F to +149°F) Real-time automatic calibration (voltage, humidity, and ambient noise) Firmware filtering for excellent noise tolerance and clutter rejection Weather resistant (IP67), optional chemical resistant F-Option Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4-inch National Pipe Thread Straight) Long, narrow detection zone Most-likely filter Great for liquid level measurement 20mA is the minimum reported range and 4mA is maximum reported range

₹17,699.00*
MB1003 HRLV-MaxSonar-EZ0
MaxBotix HRLV-MaxSonar-EZ0
Features of the MB1003, HRLV-MaxSonar-EZ0, include millimeter resolution, the widest and most sensitive beam pattern of any unit from the HRLV‑MaxSonar‑EZ sensor line, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial. This makes the MB1003 an excellent choice for use where high sensitivity, wide beam, or people detection is desired. The MB1003 from the HRLV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1003 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Specifications Resolution of 1‑mm 10Hz reading rate Internal temperature compensation Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their systems without sacrificing performance 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm Maximum range of 5000 mm (195 inches) Tolerates outside noise sources Operates from 2.5V-5.5V Low 3.1mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from -0C to +65C (+32F to +149F) Real-time automatic calibration (voltage, humidity, ambient noise) Option external temperature compensation HR‑MaxTemp Firmware filtering for better noise tolerance and clutter rejection Widest beam of the HRLV-MaxSonar-EZ sensors Great for people detection applications

₹3,359.00*
MaxBotix MB1002 ParkSonar-EZ-84
MaxBotix MB1002 ParkSonar-EZ-84
Features of the MB1002, ParkSonar-EZ-84, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1002 has a detection zone of ~7 feet. The MB1002 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 7 feet (84 inches)  

₹2,649.00*
MaxBotix MB1004 LV-ProxSonar-EZ0
Features of the MB1004, ProxSonar-EZ0, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone. The MB1004 has a detection zone of ~7 feet. The MB1004 will allow for 6+ simultaneous sensors depending on sensor mounting and environment.  Specifications Resolution of 1 inch ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Maximum reported range of 254 inches (645 cm) ~7 foot proximity detection zone (84 inches or 213 cm) Run up to 6+ sensors in the same environment Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from sensor outputs: Serial and Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Longest detection zone

₹2,649.00*
MaxBotix MB1005 ParkSonar-EZ-96
Features of the MB1005, ParkSonar-EZ-96, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1005 has a detection zone of ~8 feet. The MB1005 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 8 feet (96 inches)

₹2,649.00*
MaxBotix MB1006 ParkSonar-EZ-108
MaxBotix MB1006 ParkSonar-EZ-108
Features of the MB1006, ParkSonar-EZ-108, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1006 has a detection zone of ~9 feet. The MB1006 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 9 feet (108 inches)  

₹2,649.00*
MaxBotix MB1007 ParkSonar-EZ-120
Features of the MB1007, ParkSonar-EZ-120, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1007 has a detection zone of ~10 feet. The MB1007 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 10 feet (120 inches)  

₹2,649.00*
MaxBotix MB1008 ParkSonar-EZ-132
MaxBotix MB1008 ParkSonar-EZ-132
Features of the MB1008, ParkSonar-EZ-132, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle or other detectable target enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1008 has a detection zone of ~11 feet. The MB1008 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 11 feet (132 inches)  

₹2,649.00*
MaxBotix MB1009 ParkSonar-EZ-144
MaxBotix MB1009 ParkSonar-EZ-144
Features of the MB1009, ParkSonar-EZ-144, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle or other detectable target enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone. The MB1009 has a detection zone of ~12 feet. The MB1009 will allow for 14+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~10 second target acquire time* ~5 second target release time* Automatic multi-sensor operation Vehicle Detection Sensor Maximum reported range of 254 inches (645 cm) Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches Operates between 2.5 and 5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Proximity Detection zone of 12 feet (144 inches)  

₹2,649.00*
MB1010 LV-MaxSonar-EZ1
MaxBotix MB1010 LV-MaxSonar-EZ1
Features of the MB1010, LV-MaxSonar-EZ1, include one-inch resolution, a great blend of sensitivity as well as side object rejection, range information from 6 inches to 254 inches, a 20Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. This makes the MB1010 a good low-cost starting place for a customer not sure of which LV‑MaxSonar‑EZ sensor to use. The MB1010 from the LV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1010 learns the ringdown pattern when commanded to start ranging. This helps the sensor to learn the environment and can help the sensor ignore obstacles that are present at power-up.  Specifications Resolution of 1 inch 20Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Maximum Range of 254 inches (645 cm) Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Widest beam of the LV-MaxSonar-EZ sensors Our most popular indoor ultrasonic rangefinder Our low cost, all-around sensor that is excellent for many projects Best beam and sensitivity balance for the LV-MaxSonar-EZ sensors  

₹2,649.00*
MaxBotix MB1013 HRLV-MaxSonar-EZ1
Features of the MB1013, HRLV-MaxSonar-EZ1, include millimeter resolution, a great blend of sensitivity as well as side object rejection, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial. This makes the MB1013 a good low-cost starting place for a customer not sure of which HRLV‑MaxSonar‑EZ sensor to use. The MB1013 from the HRLV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1013 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Product Specifications Resolution of 1‑mm 10Hz reading rate Internal temperature compensation Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their systems without sacrificing performance 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm Maximum range of 5000 mm (195 inches) Tolerates outside noise sources Operates from 2.5V-5.5V Low 3.1mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from -0C to +65C (+32F to +149F) Real-time automatic calibration (voltage, humidity, ambient noise) Option external temperature compensation HR‑MaxTemp Firmware filtering for better noise tolerance and clutter rejection Great starting point for users unsure of which sensor to use  

₹3,099.00*
MaxBotix MB1014 LV-ProxSonar-EZ1
MaxBotix MB1014 LV-ProxSonar-EZ1
Features of the MB1014, ProxSonar-EZ1, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone. The MB1014 has a detection zone of ~5 feet. The MB1014 will allow for 8+ simultaneous sensors depending on sensor mounting and environment. Specifications   Resolution of 1 inch ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Maximum reported range of 254 inches (645 cm) ~7 foot proximity detection zone (84 inches or 213 cm) Run up to 6+ sensors in the same environment Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from sensor outputs: Serial and Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Longest detection zone

₹2,649.00*
MaxBotix MB1020 LV-MaxSonar-EZ2
Features of the MB1020, LV-MaxSonar-EZ2, include one-inch resolution, an excellent compromise between sensitivity and side object rejection, range information from 6 inches to 254 inches, a 20Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. This makes the MB1020 is a great choice for applications that require decreased sensitivity to side objects than the MB1010. The MB1020 from the LV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. Specifications Resolution of 1 inch 20Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Maximum Range of 254 inches (645 cm) Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Narrower beam width than the LV-MaxSonar-EZ1 In addition, the MB1020 learns the ringdown pattern when commanded to start ranging. This helps the sensor to learn the environment and can help the sensor ignore obstacles that are present at power-up.  

₹2,649.00*
MaxBotix MB1023 HRLV-MaxSonar-EZ2
MaxBotix MB1023 HRLV-MaxSonar-EZ2
Features of the MB1023, HRLV-MaxSonar-EZ2, include millimeter resolution, an excellent compromise between sensitivity and side object rejection, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial. This makes the MB1023 is a great choice for applications that require decreased sensitivity to side objects than the MB1013. The MB1023 from the HRLV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1023 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Specifications Resolution of 1‑mm 10Hz reading rate Internal temperature compensation Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their systems without sacrificing performance 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm Maximum range of 5000 mm (195 inches) Tolerates outside noise sources Operates from 2.5V-5.5V Low 3.1mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from -0C to +65C (+32F to +149F) Real-time automatic calibration (voltage, humidity, ambient noise) Option external temperature compensation HR‑MaxTemp Firmware filtering for better noise tolerance and clutter rejection Narrower beam then the MB1013 HRLV-MaxSonar-EZ1  

₹3,099.00*
MaxBotix MB1024 LV-ProxSonar-EZ2
MaxBotix MB1024 LV-ProxSonar-EZ2
Features of the MB1024, ProxSonar-EZ2, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone. The MB1024 has a detection zone of ~3 feet. The MB1024 will allow for 10+ simultaneous sensors depending on sensor mounting and environment. Specifications    Resolution of 1 inch ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Maximum reported range of 254 inches (645 cm) ~3 foot proximity detection zone (36 inches or 91 cm) Run up to 10+ sensors in the same environment Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from sensor outputs: Serial and Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product 3 foot detection zone

₹2,649.00*
MaxBotix MB1030 LV-MaxSonar-EZ3
Features of the MB1030, LV-MaxSonar-EZ3, include one-inch resolution, a narrow beam as well as excellent side object rejection, range information from 6 inches to 254 inches, a 20Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. The MB1030 has slightly wider beam width than the MB1040 which makes it a good choice for applications where the MB1043 does not have enough sensitivity. The MB1030 from the LV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1030 learns the ringdown pattern when commanded to start ranging. This helps the sensor to learn the environment and can help the sensor ignore obstacles that are present at power-up. Specifications Resolution of 1 inch 20Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Maximum Range of 254 inches (645 cm) Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Narrow beam and good side object rejection Best for large object detection applications    

₹2,649.00*
MaxBotix MB1033 HRLV-MaxSonar-EZ3
MaxBotix MB1033 HRLV-MaxSonar-EZ3
Features of the MB1033, HRLV-MaxSonar-EZ3, include millimeter resolution, a narrow beam as well as excellent side object rejection, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial. The MB1033 has slightly wider beam width than the MB1043 which makes it a good choice for applications where the MB1043 does not have enough sensitivity. The MB1033 from the HRLV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1033 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Specifications Resolution of 1‑mm 10Hz reading rate Internal temperature compensation Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their systems without sacrificing performance 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm Maximum range of 5000 mm (195 inches) Tolerates outside noise sources Operates from 2.5V-5.5V Low 3.1mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from -0C to +65C (+32F to +149F) Real-time automatic calibration (voltage, humidity, ambient noise) Option external temperature compensation HR‑MaxTemp Firmware filtering for better noise tolerance and clutter rejection Narrow beam and good side object rejection Best for large object detection applications  

₹3,099.00*
MaxBotix MB1034 LV-ProxSonar-EZ3
MaxBotix MB1034 LV-ProxSonar-EZ3
Features of the MB1034, ProxSonar-EZ3, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone. The MB1034 has a detection zone of ~2 feet. The MB1034 will allow for 13+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Maximum reported range of 254 inches (645 cm) ~2 foot proximity detection zone (24 inches or 60 cm) Run up to 13+ sensors in the same environment Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from sensor outputs: Serial and Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product 2 foot detection zone

₹2,649.00*
MaxBotix MB1040 LV-MaxSonar-EZ4
Features of the MB1040, LV-MaxSonar-EZ4, include one-inch resolution, the narrowest beam width of any sensor in the LV‑MaxSonar‑EZ sensor line, range information from 6 inches to 254 inches, a 20Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. The MB1040 is a great choice for applications where only larger objects need to be detected. The MB1040 from the LV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1040 learns the ringdown pattern when commanded to start ranging. This helps the sensor to learn the environment and can help the sensor ignore obstacles that are present at power-up. Specifications Resolution of 1 inch 20Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Maximum Range of 254 inches (645 cm) Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Narrowest beam of the LV-MaxSonar-EZ sensors Best for large object detection applications

₹2,649.00*
MB1043 HRLV-MaxSonar-EZ4
MaxBotix MB1043 HRLV-MaxSonar-EZ4
Features of the MB1043, HRLV-MaxSonar-EZ4, include millimeter resolution, the narrowest beam width of any sensor in the HRLV‑MaxSonar‑EZ sensor line, short to long distance detection, range information from 300mm to 5000mm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and a choice of either RS232 or TTL serial. The MB1043 is a great choice for applications where only larger objects need to be detected. The MB1043 from the HRLV‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1043 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Specifications Resolution of 1‑mm 10Hz reading rate Internal temperature compensation Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their systems without sacrificing performance 42kHz Ultrasonic sensor measures distance to objects RoHS compliant Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm Maximum range of 5000 mm (195 inches) Tolerates outside noise sources Operates from 2.5V-5.5V Low 3.1mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from -0C to +65C (+32F to +149F) Real-time automatic calibration (voltage, humidity, ambient noise) Option external temperature compensation HR‑MaxTemp Firmware filtering for better noise tolerance and clutter rejection Narrowest beam of the HRLV-MaxSonar-EZ sensors Best for large object detection applications  

₹3,089.00*
MaxBotix MB1044 LV-ProxSonar-EZ4
Features of the MB1044, ProxSonar-EZ4, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial. The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone. The MB1044 has a detection zone of ~1 feet. The MB1044 will allow for 15+ simultaneous sensors depending on sensor mounting and environment. Specifications Resolution of 1 inch ~2.5 second target acquire time* ~1.5 second target release time* Automatic multi-sensor operation People sensor Maximum reported range of 254 inches (645 cm) ~1 foot proximity detection zone (12 inches or 30 cm) Run up to 15+ sensors in the same environment Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from sensor outputs: Serial and Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Operates from 2.5-5.5V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Short range detection  

₹2,649.00*
MaxBotix MB1200 XL-MaxSonar-EZ0
MaxBotix MB1200 XL-MaxSonar-EZ0
Features of the MB1200, XL-MaxSonar-EZ0, include centimeter resolution, the widest and most sensitive beam pattern of any unit from the XL‑MaxSonar‑EZ sensor line, short to long distance detection, range information from 25cm to 765cm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. This makes the MB1200 an excellent choice for use where high sensitivity, wide beam, or people detection is desired. The MB1200 from the XL‑MaxSonar‑EZ line of sensors is a very small, less than one cubic inch, ultrasonic sensor component module. This sensor comes with mounting holes provided on the circuit board for easy installation in nearly all applications. In addition, the MB1200 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources. Variations on this sensor model MB1260 is the 10-meter version of this sensor. Specifications Resolution of 1 cm 10Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no dead zone, objects closer than 25 cm range as 25 cm Operates from 3.3-5.5V Low 3.4mA average current requirement Small, light weight module Designed for easy integration into your project or product Operational Temperature from 0˚C to +65˚C (32˚F to +149˚F) Real-time automatic calibration (voltage, humidity, ambient noise) Firmware filtering for better noise tolerance and clutter rejection 200,000+ Hours Mean Time Between Failure Widest and most sensitive beam of our XL-MaxSonar-EZ sensors Maximum range of 765 cm (300 inches) Hardware gain of 4000 Long range, wide detection zone for small targets  

₹3,979.00*