Welcome to MGSL!
Turtlebot 4 Launched! Preorder yours now!
Filter
Airflow Breathing Sensor PRO for MySignals (eHealth Medical Development Platform)
Airflow Breathing Sensor PRO for MySignals (eHealth Medical Development Platform)
The nasal / mouth airflow sensor is a device used to measure the breathing rate in a patient in need of respiratory help or person. This device consists of a flexible thread which fits behind the ears, and a set of two prongs which are placed in the nostrils. Breathing is measured by these prongs. The specifically designed cannula/holder allows the thermocouple sensor to be placed in the optimal position to accurately sense the oral/nasal thermal airflow changes as well as the nasal temperature air. Comfortable adjustable and easy to install. You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹20,159.00*
Alarm / Emergency Button BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
Alarm / Emergency Button BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
The Alarm / Emergency Button provides immediate access to assistance with just the touch of the button. This call button can be worn as a help pendant around your neck or as an alert watch button around your wrist. Unlike other systems or a cell phone, you don’t have to think about what numbers to dial, which buttons to press, or if it’s charged up. Your medical alert button is always ready. This sensor uses BLE in order to connect to MySignals device. Watch the step by step Video Tutorial! Note: The PRO version of this sensor enhances the previous version of eHealth v2. Now all the sensors come with CE marks and offer higher accuracy and robustness You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹3,079.00*
Ammonia (NH3) for low concentrations Gas Sensor probe [Calibrated]
Specifications Gas: NH3 Sensor: 4-NH3-100 Performance Characteristics Nominal Range: 0 to 100 ppm Long Term Output Drift: < 2% signal/month Response Time (T90): ≤ 90 seconds Sensitivity: 135 ± 35 nA/ppm Accuracy: as good as ±0.5 ppm* (ideal conditions) Operation Conditions Temperature Range: -20 ºC to 50 ºC Operating Humidity: 15 to 90% RH non-condensing Pressure Range: 90 to 110 kPa Storage Temperature: 0 ºC to 20 ºC Expected Operating Life: ≥1 year in air Average consumption: less than 1 mA   * Accuracy values are only given for the optimum case.

₹68,329.00*
Ammonia (NH3) Gas Sensor Probe for high concentrations [Calibrated]
Specifications Gas: NH3 Sensor: 4-NH3-500 Performance Characteristics Nominal Range: 0 to 500 ppm Long Term Output Drift: < 10% signal/month Response Time (T90): ≤ 90 seconds Sensitivity: 135 ± 35 nA/ppm Accuracy: as good as ±3 ppm* (ideal conditions)   Operation Conditions Temperature Range: -20 ºC to 40 ºC Operating Humidity: 15 to 90% RH non-condensing Pressure Range: 90 to 110 kPa   Storage Temperature: 0 ºC to 20 ºC Expected Operating Life: ≥1 year in air   Average consumption: less than 1 mA * Accuracy values are only given for the optimum case.  

₹74,639.00*
Ammonium Ion (NH4+) Sensor Probe [PRO]
Ion : Ammonium Ion (NH4+ ) Sensitivity : -54 ± 5 Temp (°C) : 5 - 50 pH : 4 - 8,5 Lineal Range : 0,09 - 9000 mg/L Interferences : K (-0,8); Na (-2,7); Mg (-3,2); Ca (-4) Differences between Ion Sensors and Ion Sensors PRO Ions sensors are divided into two different groups: the normal ion sensor line and the PRO ion sensor line. The normal sensors are divided into Single and Double. It is important to know that it is not possible to combine the different groups of sensors (Single, Double and PRO). Each group has its own reference probe, and the reference probe can only be used with the corresponding sensors of that group: Normal Ion Sensors Single Junction Reference Probe Double Junction Reference Probe PRO Ion Sensors Smart Water Ions Reference Sensor Probe [PRO]

₹77,569.00*
Blood Pressure BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
Blood Pressure BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
Blood pressure is the pressure of the blood in the arteries as it is pumped around the body by the heart. When your heart beats, it contracts and pushes blood through the arteries to the rest of your body. This force creates pressure on the arteries. Blood pressure is recorded as two numbers—the systolic pressure (as the heart beats) over the diastolic pressure (as the heart relaxes between beats). This device allows you to measure these values and send it to MySignals [through BLE]. Monitoring blood pressure at home is important for many people, especially if you have high blood pressure. Blood pressure does not stay the same all the time. It changes to meet your body’s needs. It is affected by various factors including body position, breathing or emotional state, exercise and sleep. It is best to measure blood pressure when you are relaxed and sitting or lying down. You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹29,859.00*
Blood Pressure Sensor PRO for MySignals (eHealth Medical Development Platform)
Blood Pressure Sensor PRO for MySignals (eHealth Medical Development Platform)
Blood pressure is the pressure of the blood in the arteries as it is pumped around the body by the heart. When your heart beats, it contracts and pushes blood through the arteries to the rest of your body. This force creates pressure on the arteries. Blood pressure is recorded as two numbers—the systolic pressure (as the heart beats) over the diastolic pressure (as the heart relaxes between beats). Monitoring blood pressure at home is important for many people, especially if you have high blood pressure. Blood pressure does not stay the same all the time. It changes to meet your body’s needs. It is affected by various factors including body position, breathing or emotional state, exercise and sleep. It is best to measure blood pressure when you are relaxed and sitting or lying down. You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW BLE Complete Kit (eHealth Medical Development Platform)  Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹29,859.00*
Body Position Sensor PRO for MySignals (eHealth Medical Development Platform)
Body Position Sensor PRO for MySignals (eHealth Medical Development Platform)
The Patient Position Sensor (Accelerometer) monitors five different patient positions (standing/sitting, supine, prone, left and right.). Body Position Sensor uses a triple axis accelerometer to obtain the patient's position. You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹8,779.00*
Body Scale BLE Sensor PRO - MySignals (eHealth Medical Development Platform)
Body Scale BLE Sensor PRO - MySignals (eHealth Medical Development Platform)
Weighing scales (or weigh scales or scales) are devices to measure weight or calculate mass. Spring balances or spring scales measure weight (force) by balancing the force due to gravity against the force on a spring, whereas a balance or pair of scales using a balance beam compares masses by balancing the weight due to the mass of an object against the weight of a known mass or masses. This body scale uses a BLE connection to sync your weight, BMI, and body fat readings with your personal health dashboard. The parameters you can measure with this device are: weight, bone mass, body fat, muscle mass, body water, visceral fat, Basal Metabolic Rate and Body Mass Index. Max Capacity : 150kg/330lb Display Readability : 0.1kg/0.2lb Weighing Units : kg. lb. st Platform : Tempered Glass + 18/8 SS LED Display The sensor works with internal batteries. Measurement: Parameter Unit Range Weight Kilograms 5-150Kg Bone Percentage 0-100% Body fat Percentage 0-100% Muscle mass Percentage 0-100% Body water Percentage 0-100% Visceral fat Percentage 0-100% BMI Kcal 0-500Kcal BMR Kcal 0-500Kcal Note: The PRO version of this sensor enhances the previous version of eHealth v2. Now all the sensors come with CE marks and offer higher accuracy and robustness You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹23,089.00*
Body Temperature BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
Body Temperature BLE Sensor PRO for MySignals (eHealth Medical Development Platform)
The temperature sensor allows you to measure this key parameter for body monitoring. Its measure the human body temperature with a 0.1 ºC maximum desviation. An armband is supplied to facilitate the placement of the sensor on the patient's arm. This sensor uses BLE in order to connect to MySignals device. Watch the step by step Video Tutorial! Note: The PRO version of this sensor enhances the previous version of eHealth v2. Now all the sensors come with CE marks and offer higher accuracy and robustness You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals WebSite MySignals Technical Guide (PDF) MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹10,009.00*
Body Temperature Sensor PRO for MySignals (eHealth Medical Development Platform)
Body Temperature Sensor PRO for MySignals (eHealth Medical Development Platform)
This sensor allows you to measure this key parameter for body monitoring. The temperature sensor allows you to measure this key parameter for body monitoring. Its measure the human body temperature with a 0.1 ºC maximum desviation. The sensor needs to be connected to the specific Temperature jack connector in MySignals board and it works with direct connector power supply. You can use it with : MySignals HW (eHealth Medical Development Shield for Arduino) MySignals SW (eHealth Medical Development Platform) Or buy : MySignals HW Complete Kit (eHealth Medical Development Platform for Arduino) MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) MySignals SW Complete Kit (eHealth Medical Development Platform) MySignals SW BLE Complete Kit (eHealth Medical Development Platform) Useful Links: MySignals SW Tutorial in CH MySignals HW Tutorial in CH

₹10,009.00*
Bromide Ion (Br-) Sensor Probe
Remember the Double Junction Reference Probe is mandatory for this sensor. Don't forget to purchase the Bromide Calibration Kit for proper operation. For more information, read this article.

₹31,399.00*
Bromide Ion (Br-) Sensor Probe [PRO]
Ion : Bromide Ion (Br-) Sensitivity : -54 ± 5 Temp (°C) : 5 - 50 pH : 1 - 12 Lineal Range : 0,4 - 8000 mg/L Interferences : Cl (-2,7); OH (-4,5) Differences between Ion Sensors and Ion Sensors PRO Ions sensors are divided into two different groups: the normal ion sensor line and the PRO ion sensor line. The normal sensors are divided into Single and Double. It is important to know that it is not possible to combine the different groups of sensors (Single, Double and PRO). Each group has its own reference probe, and the reference probe can only be used with the corresponding sensors of that group: Normal Ion Sensors Single Junction Reference Probe Double Junction Reference Probe PRO Ion Sensors Smart Water Ions Reference Sensor Probe [PRO]

₹141,279.00*
Calcium Ion (Ca2+) Sensor Probe [PRO]
Ion : Calcium Ion (Ca 2+ ) Sensitivity : 24 ± 5 Temp (°C) : 5 - 50 pH : 3,5 - 8 Lineal Range : 0,4 - 4000 mg/L Interferences : NH 4 (-3); K (-3,6); Na (-3,7) Differences between Ion Sensors and Ion Sensors PRO Ions sensors are divided into two different groups: the normal ion sensor line and the PRO ion sensor line. The normal sensors are divided into Single and Double. It is important to know that it is not possible to combine the different groups of sensors (Single, Double and PRO). Each group has its own reference probe, and the reference probe can only be used with the corresponding sensors of that group: Normal Ion Sensors Single Junction Reference Probe Double Junction Reference Probe PRO Ion Sensors Smart Water Ions Reference Sensor Probe [PRO]

₹77,569.00*
CAN Bus Module for libelium Plug and Sense
CAN Bus Module for libelium Plug and Sense
The CAN Bus module has been tested with various devices and cars, and is compatible with the majority of commercial modules, but this does not ensure the working with all of them. Be sure that the CAN Bus module fits your technical requirements. Every car manufacturer has different CAN Bus configurations so that must be studied carefully. It is the task of the CAN Bus user to perform the integration of the CAN Bus module with commercial devices like cars or sensors. Main features CAN controller MCP2515 CAN transceiver MCP2551 Dimensions: 33 x 30 x 17 mm Weight: 10 g Female DB9 connector Speed up to 1 Mbps   Electrical characteristics Board power voltage: 3.3V CAN controller power voltage: 5 V CAN transceiver power voltage: 5 V Maximum admitted current (continuous): 200 mA Maximum admitted current (peak): 300 mA Push button external reset   Connection Diagram The CAN Bus module uses the SPI pins for communication. The SPI port allows more speed communication and frees up the Waspmote’s UART for other purposes. The Expansion Board allows to connect two boards at the same time in the Waspmote sensor platform. This means a lot of different combinations are possible using any of the radios available for Waspmote (802.15.4, ZigBee, DigiMesh, 868 MHz, 900 MHz, WiFi, GPRS, GPRS+GPS, 3G, 4G, Sigfox, LoRaWAN, Bluetooth Pro, Bluetooth Low Energy and RFID/NFC) and the CAN Bus module. The CAN Bus module must be plugged on the socket 0 and cannot be in use with other SPI modules like LoRa or RS-485.

₹16,929.00*
CAN Bus Module for libelium Plug and Sense
CAN Bus Module(4G models) for libelium Plug and Sense
The CAN Bus module has been tested with various devices and cars, and is compatible with the majority of commercial modules, but this does not ensure the working with all of them. Be sure that the CAN Bus module fits your technical requirements. Every car manufacturer has different CAN Bus configurations so that must be studied carefully. It is the task of the CAN Bus user to perform the integration of the CAN Bus module with commercial devices like cars or sensors. Main features CAN controller MCP2515 CAN transceiver MCP2551 Dimensions: 33 x 30 x 17 mm Weight: 10 g Female DB9 connector Speed up to 1 Mbps   Electrical characteristics Board power voltage: 3.3V CAN controller power voltage: 5 V CAN transceiver power voltage: 5 V Maximum admitted current (continuous): 200 mA Maximum admitted current (peak): 300 mA Push button external reset   Connection Diagram The CAN Bus module uses the SPI pins for communication. The SPI port allows more speed communication and frees up the Waspmote’s UART for other purposes. The Expansion Board allows to connect two boards at the same time in the Waspmote sensor platform. This means a lot of different combinations are possible using any of the radios available for Waspmote (802.15.4, ZigBee, DigiMesh, 868 MHz, 900 MHz, WiFi, GPRS, GPRS+GPS, 3G, 4G, Sigfox, LoRaWAN, Bluetooth Pro, Bluetooth Low Energy and RFID/NFC) and the CAN Bus module. The CAN Bus module must be plugged on the socket 0 and cannot be in use with other SPI modules like LoRa or RS-485.

₹13,079.00*
Carbon Dioxide (CO2) Gas Sensor [Calibrated]
Specifications Gas: CO2 Sensor: INE20-CO2P-NCVSP   Performance Characteristics   Nominal Range: 0 to 5000 ppm Long Term Output Drift: < ±250 ppm/year Warm up time: 60 seconds @ 25 ºC                           At least 30 min for full specification @ 25 °C Response Time (T90): ≤ 60 seconds Resolution: 25 ppm Accuracy: as good as ±50 ppm*, from 0 to 2500 ppm range (ideal conditions)                   as good as ±200 ppm*, from 2500 to 5000 ppm range (ideal conditions)   Operation Conditions   Temperature Range: -40 ºC to 60 ºC Operating Humidity: 0 to 95% RH non-condensing Storage Temperature: -40 ºC to 85 ºC          MTBF: ≥ 5 years Average consumption: 80 mA   Note: The CO2  Sensor and the Methane (CH4) and Combustible Gas Sensor have high power requirements and cannot work together in the same Gases PRO Sensor Board. The user must choose one or the other, but not both * Accuracy values are only given for the optimum case.

₹99,729.00*
Carbon Monoxide (CO) Gas sensor probe for low concentrations [Calibrated]
Specifications Gas: CO Sensor: CO-A4 Performance Characteristics Nominal Range: 0 to 25 ppm Maximum Overload: 2000 ppm Long Term Sensitivity Drift: < 10% change/year in lab air, monthly test Long Term zero Drift: < ±100 ppb equivalent change/year in lab air Response Time (T90): ≤ 20 seconds Sensitivity: 220 to 375 nA/ppm Accuracy: as good as ±0.1 ppm* (ideal conditions) H2S filter capacity: 250000 ppm·hrs Operation Conditions Temperature Range: -30 ºC to 50 ºC Operating Humidity: 15 to 90% RH non-condensing Pressure Range: 80 to 120 kPa Storage Temperature: 0 ºC to 20 ºC Expected Operating Life: 3 years in air Average consumption: less than 1 mA   Accuracy values are only given for the optimum case.

₹42,479.00*
Chloride Ion (Cl-) Sensor Probe
Remember the Double Junction Reference Probe is mandatory for this sensor. Don't forget to purchase the Chloride Calibration Kit for proper operation. For more information, read this article.  

₹31,399.00*
Chloride Ion (Cl-) Sensor Probe [PRO]
Ion : Chloride Ion (Cl - ) Sensitivity : -54 ± 5 Temp (°C) : 5 - 50 pH : 2 - 12 Lineal Range : 1,5 - 35000 mg/L Interferences : Error presence of Ag or S Differences between Ion Sensors and Ion Sensors PRO Ions sensors are divided into two different groups: the normal ion sensor line and the PRO ion sensor line. The normal sensors are divided into Single and Double. It is important to know that it is not possible to combine the different groups of sensors (Single, Double and PRO). Each group has its own reference probe, and the reference probe can only be used with the corresponding sensors of that group: Normal Ion Sensors Single Junction Reference Probe Double Junction Reference Probe PRO Ion Sensors Smart Water Ions Reference Sensor Probe [PRO]

₹77,569.00*
Conductivity sensor probe
Conductivity sensor probe
The conductivity sensor is a two-pole cell whose resistance varies in function of the conductivity of the liquid it is immersed in. That conductivity will be proportional to the conductance of the sensor (the inverse of its resistance), multiplied by the constant cell, in the case of the Libelium sensor around 1 cm-1, leading to a value in Siemens per centimeter (S/cm). To power the conductivity sensor an alternating current circuit has been installed in order to avoid the polarization of the platinum electrodes. Sensor specifications Sensor type: Two electrodes sensor Electrode material: Platinum Conductivity cell constant: 1 ± 0.2 cm-1  Cable length: ~5 m

₹9,079.00*
Conductivity, water content and soil temperature 5TE sensor probe
Conductivity, water content and soil temperature 5TE sensor probe
The Conductivity, water content and soil temperature sensor probe (Decagon 5TE) can measure volumetric water content, electrical conductivity, and temperature of soil. The sensor uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content (VWC). A thermistor in thermal contact with the sensor prongs provides the soil temperature, while the screws on the surface of the sensor form a two- sensor electrical array to measure electrical conductivity. Specifications General  specifications Operating temperature: -40 to 60 ºC Dielectric measurement frequency: 70 MHz Measurement time: 150 ms Dimensions: 10 cm x 3.2 cm x 0.7 cm Prong length: 5.2 cm Cable length: 5 m Volumetric water content Range: Apparent dielectric permittivity (εa): 1 (air) to 80 (water) Resolution: 0.1 εa (unitless) from 1 to 20, < 0.75 εa (unitless) from 20 to 80 -       0.0008 m3/ m3 (0.08% VWC) from 0 to 50% VWC Accuracy: εa : ±1 εa (unitless) from 1 to 40 (soil range), ±15% from 40 to 80 (VWC) Bulk electrical conductivity Range: 0 to 23 dS/m (bulk) Resolution: 0.01 dS/m from 0 to 7 dS/m, 0.05 dS/m from 7 to 23 dS/m Accuracy: ±10% from 0 to 7 dS/m Temperature Range: −40 to 60 ºC Resolution: 0.1 ºC Accuracy: ±1 ºC

₹70,029.00*
Conductivity, water content and soil temperature GS3 sensor probe
Conductivity, water content and soil temperature GS3 sensor probe
The Conductivity, water content and soil temperature sensor probe (Decagon GS3) can measure many types of growing media, specially in greenhouse applications where the probe can be inserted easily into different types of soilless substrates. The GS3 sensor determines volumetric water content (VWC) by measuring the dielectric constant (εa) of the medium using capacitance / frequency-domain technology, the temperature using a thermistor, and electrical conductivity using a stainless steel electrode array. Specifications General  specifications Operating temperature: -40 to 60 ºC Dielectric measurement frequency: 70 MHz Measurement time: 150 ms Dimensions: 9.3 x 2.4 x 6.5 cm Prong length: 5.5 cm Cable length: 5 m Volumetric water content Accuracy: εa: ±1 εa  (unitless) from 1 to 40 (soil range), ±15% from 40 to 80 Resolution: 0.1 εa (unitless) from 1 to 20 < 0.75 εa (unitless) from 20 to 80 -       0.002 m3/ m3 (0.2% VWC) from 0 to 40% VWC -       0.001 m3/ m3 (0.1% VWC) > 40% VWC Range: Apparent dielectric permittivity (εa): 1 (air) to 80 (water) Bulk electrical conductivity Accuracy: ± 5% from 0 to 5 dS/m, ±10% from 5 to 23 dS/m Resolution: 0.001 dS/m from 0 to 23 dS/m Range: 0 to 25 dS/m (bulk) Temperature Accuracy: ±1 ºC Resolution: 0.1 ºC Range: -40 to 60 ºC  

₹60,019.00*
Cupric Ion (Cu2+) Sensor Probe
Remember the Double Junction Reference Probe is mandatory for this sensor. Don't forget to purchase the Cupric Calibration Kit for proper operation. For more information, read this article.

₹31,399.00*