Banana Pi BPI-M64 is a 64-bit quad-core mini single board computer. It features 2GB of RAM and 8GB eMMC. It also has onboard WiFi and BT. On the ports side, the BPI-M64 has 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, and lastly a DC power port. Also being a member of the Banana Pi family, the M64 is a big jump from the octa-core BPI-M3. This is because this Banana Pi BPI is named after its 64-bit SoC. BPI-M4 will be reserved for an upcoming board:p Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project. Key Features 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor. 2GB DDR3 SDRAM with 733MHz. 8 GB eMMC storage (16,32,64 options available). WiFi (AP6212) & Bluetooth onboard. CPU 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor GPU MALI-400 MP2 @ 500MHz Memory 2GB DDR3 SDRAM (shared with GPU) Storage Support MicroSD Card(up to 64GB)/eMMC(8GB onboard) Onboard Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D) WiFi 802.11 b/g/n (AP6212) Bluetooth BT4.0 (AP6212) Video In CSI connector that supports 8-bit YUV422 CMOS sensor CSI, CCIR656 protocol for NTSC and PAL, 5MP camera, 1080p video @30Hz Video Out HDMI 1.4 with resolutions (upto 4K @24Hz) MIPI DSI for RAW LCD panels Audio Out 3.5 mm Jack and HDMI Audio In On board microphone Power Source 5V 2A DC port USB Ports 2x USB 2.0, USB OTG(Micro USB) Buttons Reset button, Power button, U-boot button GPIO 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground LED Power status Led and RJ45 Led IR Onboard IR receiver OS Android and Linux etc.OS Dimensions 92mm x 60mm

Compact DIN rail power supply. Assembled on 35mm DIN Rail. Power supplies provide parallel operation, overvoltage protection, and overcurrent protection. There is a LED inductor for power status, the power supply is certified according to UL. Characteristics and advantages •  Universal input range (90 Vac to 264 Vac) • Output range: 24 Vdc • Output power: 30 W • Compact size• Installation on 35 mm DIN rail• Overvoltage protection• Overcurrent protection• LED indicator Product application information • Process control • Plant automation • Transportation and traffic system • Other industrial applications

12Vdc Power supply (250Vac to 12Vdc)(1.2A) Compact DIN rail power supply. Assembled on 35mm DIN Rail. Power supplies provide parallel operation, overvoltage protection, and overcurrent protection. There is a LED inductor for power status, the power supply is certified according to UL. Characteristics and advantages Universal input range (90 Vac to 264 Vac) Output range: 12 Vdc Output power: 15 W Compact size Installation on 35 mm DIN rail Overvoltage protection Overcurrent protection LED indicator Product application information  

Fly high with your ultimate IoT platform Get ready to fall in love with the HummingBoard – a small and powerful, low-cost ARM computer that ignites the imagination. Whatever your dream is, the HummingBoard will help make it happen – the possibilities for creating the next great IoT innovation are truly limitless. IoT is about “things” connecting with systems, people and other things such as sensors and actuators. IoT field is emerging with a large variety of use cases and applications, requiring different connectivity methods and dynamic and flexible hardware capabilities. The HummingBoard is the most innovative, dense and flexible IoT platform of its kind, simplifying design and reliable deployment of such products.  

Touch Screen ready to be used with Raspberry PI, Banana PI and Hummingboard The first Aluminium Panel PC Enclosure for industrial uses in compliance with EMC, CE, FCC. Ready to be used with different CPUs. This Panel PC allow use Raspberry PI, Banana PI and Hummingboard on industrial environments with a 10.1″ TouchScreen. RASPBERRY PI NOT INCLUDED (SELECT RIGHT CPU: RASPBERRY PI, BANANA PI, HUMMINGBOARD) TFT 10.1” Resistive Multitouch LVDS, 315 nits, 170ºviewing angle, Format 16:9, 1280×720, Processor (Assemble right CPU) Raspberry PI (Not Included) Banana PI (Not Included) HummingBoard (Not Included) Power supply 12Vdc Operating system (Not Included) Choose the right µSD Card including right Operation System IOs Depends of CPU selected Energy consumption 1.25A Power Supply 12Vdc  

Technical Specifications Industrial Pull UP I2C conection ( include 2 units): PT 4 Feed-Through and Multi-Conductor Terminal Blocks 50% less insertion force. Compact design and front connection facilitate wiring in the smallest of spaces. Tool-free wiring of conductors with ferrules or solid conductors. Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2). Actuation lever opens the terminal point, so there is no direct contact with live parts. Double bridge shaft enables individual potential distribution and supply.  

Modular PLC This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 17I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox and the Touchberry Pi with instantaneous connection. Arduino MEGA included Inputs – 6 Intputs: (4x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (2x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” Outputs – 11 Outputs: (8x) Relay outputs (220Vac – 5A) (3x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication RS485 RS232  

Modular PLC This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 21I/Os. It also contains several communication ports which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Inputs (Arduino Mega included) – 13 Input: (6x) Analog (0-10Vdc) / Digital (5-24Vdc) configurable by software. (7x) Digital Isolated (5-24Vdc). Outputs (Arduino Mega included) – 8 Output: (8x) Digital Isolated (5-24Vdc) / (3 of which) PWM Isolated (3 of which) Analog (0-10Vdc) configurable by switch. Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not abailable using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Application Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232  

Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 38I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Arduino MEGA included Inputs – 19 Intputs: (10x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (4x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” (5x) Isolated Digital Inputs (5-24Vdc) Outputs – 19 Outputs: (8x) Relay outputs (220Vac – 5A) (6x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs / PWM Isolated (5-24Vdc) (5x) Digital Isolated (5-24Vdc) Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not abailable using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Application Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232  

Modular PLC This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 34I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Inputs Arduino MEGA included (8x) 10bit – Analog (0-10Vdc) / Digital (24Vdc) Inputs, configurable by software (4x) Interrupt Input (24Vdc). “Can work like Digital Input (24Vdc)” Outputs Arduino MEGA included (16x) Relay outputs (220Vac –? 5A) (6x) Analog (0–?10Vdc, 8bit ) / Digital (24Vdc) Output Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485 RS232  

Modular PLC This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 42I/Os. It also contains several communication ports which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Inputs (Arduino Mega included) – 26 Input: (12x) Analog (0-10Vdc) /Digital (5-24Vdc) configurable by software1 (14x) Digital Isolated (5-24Vdc). Outputs (Arduino Mega included) – 16 Output: (16x) Digital Isolated (5-24Vdc) / (6 of which) PWM configurable by software1. (6 of which) Analog (0-10Vdc) configurable by switch. Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( pull-up resistor required) RS485  RS232  

  Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 53I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Arduino MEGA included Inputs – 25 Intputs: (14x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (5x) Digital Inputs (5-24Vdc) (6x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” Outputs – 28 Outputs: (15x) Relay outputs (220Vac – 5A) (8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs (5x) Digital Outputs (Optoisolates 24Vdc max) Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)    

Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 53I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Arduino MEGA included Inputs – 29 Intputs: (14x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (9x) Digital Inputs (5-24Vdc) (6x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” Outputs – 25 Outputs: (8x) Relay outputs (220Vac – 5A) (8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs (9x) Digital Outputs (Optoisolates 24Vdc max) Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232  

Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 53I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Arduino MEGA included Inputs – 32 Intputs: (16x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (10x) Digital Inputs (5-24Vdc) (6x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” Outputs – 25 Outputs: (7x) Relay outputs (220Vac – 5A) (8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs (10x) Digital Outputs (Optoisolates 24Vdc max) Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232  

Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 49I/Os1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantantaneous connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection.   Arduino MEGA included Inputs – 18 Intputs: (12x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurables by software. (6x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)” Outputs – 31 Outputs: (23x) Relay outputs (220Vac – 5A) (8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not available using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232

Modular PLC This is the first equipment based on the Arduino technology fully designed for a professional use. This PLC has 58I/O1. It also contains several communication systems1 which provide more flexibility and control. The M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming Software This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instant connection and coding. The PLC M-DUINO is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with instantaneous connection. Inputs (Arduino Mega included) – 36 Inputs: (16x) Analog Inputs (0-10Vdc) / Digital Inputs (5-24Vdc) configurable by software. (20x) Isolated Digital Inputs (5-24Vdc) Outputs (Arduino Mega included) – 22 Outputs: (22x) Isolated Digital Outputs (5-24Vdc) / (8 of which) PWM configurable by software. (8 of which) Analog Outputs (0-10Vdc) Communications – (1x) Ethernet port. – (1x) USB port (type B). – (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules) – (3x) TTL ports. – (1x) RS-232 port. – (1x) HALF/FULL Duplex RS-485 port. – (1x) SPI external port (Using MOSI,MISO, SS pins of Arduino) – TCP IP / Modbus TCP. / Modbus RTU – WebServer capacity – Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin. See pinout modification) 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *Rx,Tx pins are not abailable using RS485. For SPI  you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Applications Automation packaging Machine: A conveyor Belt Control System. M-duino comunication mode: Ethernet example I2C comunication.( accesories boards/cables are required) RS485  RS232  

Inputs (Arduino Mega included) – 22 Intputs: (12x) Analog (0-10Vdc, 10bit) / Digital (7-24Vdc) Inputs configurables by software. (10x) Digital Isolated Inputs (7-24Vdc). (6 of which are Interrupt Inputs). Outputs (Arduino Mega included) – 36 Outputs: (16x) Relay outputs (220Vac – 5A) (8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs (12x) Digital (5-24Vdc) Outputs Communications (1x) WiFi & Bluetooth LE (based on ESP32) (1x) Ethernet port. (1x) USB port (type B). (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)  (1x) RS-232 port. (1x) HALF/FULL Duplex RS-485 port. (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino) TCP IP / Modbus TCP. / Modbus RTU WebServer capacity (just through Ethernet) Industrial Protocols Other technical specifications RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) µSD Socket (using SPI port, chip select D53 pin). 100x75x115mm DIN Rail mounting. Max consum.: 1.2A Flash Memory: 256kB (8kB for bootloader) SRAM: 8kB EEPROM: 4kB Clock Speed: 16MHz *For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino) Arduino PLC based details Industrial Automation Modular PLCThis is the first equipment based on the Arduino technology designed for a professional use. This PLC has 17I/Os. It also contains several communication ports which provide more flexibility and control. The GPRS Controllers family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc… Programming SoftwareThis PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. Instantaneous connection and codingThe GPRS Controller is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox , M-duino and the Touchberry Pi with an instantaneous connection. Specifications for MDUINO PLC ARDUINO ETHERNET & WiFi & BLUETOOTH LE 50RRA I/Os ANALOG/DIGITAL/RELAY PLUS Main Technical Specs. Device PLC CPU Arduino Mega Generic Price 400-600€ Inputs Inputs 21-30 Digital Inputs *See technical details 22 Interrupt Input 6 Analog Inputs (Included as a Digitlal Input) 12 Outputs Outputs 31-40 Digital Outputs *See technical details 12 Relay Outputs *See technical details 16 Analog Outputs (Included as a Digitlal Output) 8 Communications Ethernet Yes RS485 Yes RS232 Yes I2C Yes SPI Yes Serial TTL Yes Wifi & Bluetooth LE Yes Additional functions µSD Card Socket Yes RTC Yes

OptoIsolated Digital Input module. Converting signals from 12Vdc/Vac (220Vac max) to 5-24Vdc. This module convert any electrical signal (from 12Vdc/Vac to 220Vac max) to a digital signal at 5-24Vdc Total Convertible signals = 10 Digital Signals Pinout details Connection

It has 20 digital inputs / outputs.ARDBOX product family offers the possibility of communication between two computers using I2C obtaining a master-slave connection. Basic Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection. Instant connection and programming. The Basic Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB. This feature lets it an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipmnent without no limits. Standarised modules. The different ARDBOX family devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured on using the same methodology. Expandable Using the I2C connection which all the Basic Controllers family have you can connect up to 127 modules, which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection. NOTE: for I2C you need to explain us that requirement. Flexible and dynamic All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C. Inputs (Arduino Leonardo included) – 10 Inputs: (9x) Analog (0-10Vdc) / Digital (5 to 24Vdc) Inputs (1x) Digital inputs PNP ( 5 to 24Vdc). (Opto-isolated) Outputs (Arduino Leonardo included) – 10 Outputs: (10x) Digitals isolated (5 to 24Vdc)/ (6x) of 10x, PWM (5 to Vdc) outputs, configurables by Switch1. (7x) of 10x, Analog 0-10V output. configurables by Switch1. Communications – (1x) USB port. – (1x) RS-485 Half / full Duplex (Modbus connection available between devices) – (1x) I2C* – (1x) SPI* * See pinout to use communications ports because the number of inputs / outputs can be reduced. Other specifications: Pot: 30W Flash memory: 32kB of wich 4kB used by bootloader. SRAM: 2,5kB EEPROM: 1kB Clock Speed: 16MHz Applications How to use a stepper motor with Ardbox Analog Water treatment plant Solar monitor system with Ardbox Automation packaging Machine: Microclimate control with Ardbox. Air-conditioning system. Developing a packaging machine based on Arduino hardware. Controlling temperature with a got exchanger through a modulating valve in chemical industry. Feeding a packaging machine with a frequency driver. Automation controller with Ardbox Relay. Controlling the level of a tank for sewage treatment.  

Arduino-based PLC It has 20 digital inputs / outputs.ARDBOX product family offers the possibility of communication between two computers using I2C obtaining a master-slave connection. Basic Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection. Instant connection and programming The Basic Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB. This feature lets it an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipmnent without no limits. Standarised modules. The different ARDBOX family devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured on using the same methodology. Expandable Using the I2C connection which all the Basic Controllers family have you can connect up to 127 modules, which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection. NOTE: for I2C you need to explain us that requirement. Flexible and dynamic All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C. Inputs/ Outputs (20 I/Os) – 10 Inputs: (9x) Analog (0-10Vdc) / Digital (24Vdc) Inputs, configurable by jumpers1 (1x) Digital inputs PNP ( 24Vdc). (Opto-isolated) – 10 Outputs: (7x) Digitals (24Vdc) / Analog (0-10Vdc) / PWM (24Vdc) outputs, configurables by Jumpers1. (3x) Digital PNP outputs. Comunications – (1x) USB port. – (1x) RS-485 (Half-Full Duplex)* – (1x) I2C* (you need a pull up accesori) -(1x) SPI* * See pinout to use communications ports because the number of inputs / outputs can be reduced. Other Specifications: Pot: 30W Flash memory: 32kB of wich 0.5kB used by bootloader. SRAM: 2kB EEPROM: 1kB Clock Speed: 16MHz Applications Automation packaging Machine: Microclimate control with Ardbox. Air-conditioning system. Developing a packaging machine based on Arduino hardware. Controlling temperature with a got exchanger through a modulating valve in chemical industry. Feeding a packaging machine with a frequency driver. Automation controller with Ardbox Relay. Controlling the level of a tank for sewage treatment. Search for ARDBOX Posts on our blog  

Relay Output module. From 12Vdc to Relay Outputs (220Vac-8A) This module can read 12Vdc digital Signals to activate an Omron G2RL Relay (220Vac-8A) Total Convertible signals = 10 Relays module Pinout details Connection  

Technical Specifications Resistor for DIN Rail 500Ohms 4-20mA to 0-10Vdc ( include 1 units): PT 4 Feed-Through and Multi-Conductor Terminal Blocks 50% less insertion force Resistor tolerance +/- 1% Compact design and front connection facilitate wiring in the smallest of spaces Tool-free wiring of conductors with ferrules or solid conductors Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2) Actuation lever opens the terminal point, so there is no direct contact with live parts Double bridge shaft enables individual potential distribution and supply

Multitouch - Resistive Multitouch LVDS, 315 nits High Resolution - 1280x720, 170º viewing angle, format 16:9 Resistant - Operates at 0º to 40ºC, also between 10% and 90% humidity CPU - Quad-Core ARM Cortex-A72 1.5GHz GPU - Broadcom VideoCore VI, OpenGL ES 3.0, MPEG-2 and VC-1(license) 1080p30 H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode) USB - (2) x 2.0 (one of them is used for the touch screen) (2) x 3.0 Storage - SD / MMC / SDIO slot Network Com - Gigabit Ethernet – Serial TTL Wireless Com - Wireless LAN / 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Low Level Devices - 12x GPIO, SPI, I2C, UART OS - Linux Raspbian/Ubuntu GPIO Voltage - 3,3V Raspberry Pi Panel PC based detailsIndustrial Automation with the new Raspberry Pi 4 Model BThis Panel PC is based on GNU/Linux (Raspbian/Ubuntu) OS installed on an SD card. It has many interfaces built in: Ethernet, USB, WiFi... Using the Ethernet port or WiFi network you can remotely control all parameters, data and inputs/outputs of your control system.Furthermore, Touchberry PI comprises enough I/Os to replace PLCs on simple automation applications.Open protocols not only allow communication with other Industrial Shields PLCs, but also third-party devices and machinery.In complex systems, you can create a network between several TOUCHBERRY PI. Providing integral supervision and control solution for entire production plants and real-time data at hand. Specifications for TouchBerry PI 10.1" (Raspberry PI 4B) Main Technical Specs. Device Panel PC/HMI CPU Raspberry PI 4 Model B - 2GB or Raspberry PI 4 Model B - 4GB or Raspberry PI 4 Model B - 8GB Uncategorized Additional FAN? No or Yes. Include a FAN into the device for extra cooling µSD(Memory Card & Operating System) No µSD Card or 16GB µSD Card without OS or 16GB µSD Card + Linux or pSLC 8GBµSD Card + Linux Generic Price 400-600€ Communications Ethernet Yes RS485 Yes Additional functions µSD Card Socket Yes Additional Functions No additional functions or UPS Shield or UPS + RTC + RS485 Functionalities Panel PC TouchScreen Size 10.1"