Features 6" in length Can be used with any Digilent board Ideal for testing and verification Ships in pack of 5  

This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards. Features: Available in lengths of 6", 12", and 18" Designed for use with Digilent peripheral modules Can be used to send FPGA signals to an outside device Greater flexibility when connecting your 6-pin Pmod to a host board Uses the standard 100mil spaced 25mil square connector  What's Included: One 6-pin cable (12") One 6-pin gender changer

Note: purchase the bundle of all four PowerBRICKs and save!  Every circuit needs a power supply, but simple, low cost, portable, and reliable power sources can be hard to come by. The PowerBRICK family provides the solution to all of those requirements. There are four options to choose from: 12V, 9V, 5V, or 3.3V. PowerBRICKS are designed to easily plug directly onto your breadboard for simple, low profile integration. Powered by 5V from a standard USB, each PowerBRICK can provide up to 1.1W of power. PowerBRICKS can also be daisy-chained to provide more than one +/- Vout pair, but total power output for the entire chain should not exceed 2.2W. Available in four output voltages: 12V (±100mA) 9V (±130mA) 5V (±200mA) 3.3V (±320mA) Now available in a bundle including each of the four output voltages Product Videos

Our female-to-female 2-pin MTE cables are an ideal way to test your signals and verify your project. Choose from lengths of 9" or 18" to fit your needs. Each order ships in a pack of five.  Features: Available in lengths of 9" and 18" Can be used with any Digilent board Ideal for testing and verification Ships in pack of 5  

This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards. Features: Available in lengths of 6", 12", and 18" Designed for use with Digilent peripheral modules Can be used to send FPGA signals to an outside device Greater flexibility when connecting your 6-pin Pmod to a host board Uses the standard 100mil spaced 25mil square connector What's Included:  One 6-pin cable (18") One 6-pin gender changer  

Features: Provide power to battery connection on a Digilent Board Provides access to any two signals that are tied to any 100mil spaced pins Cable length is 6.1 inches (15.5 cm)

The Analog Discovery signal cable assembly, or flywire, is the same assembly that ships with every Analog Discovery and Analog Discovery 2 we sell. We've heard from our users that it would be nice to be able to leave their Analog Discovery's wired into one project while still being able to use it on another, and so now we sell the fly wire separately! This assembly features a 2x15 keyed female pin connector, with each of the the 30 signals broken out into separate color-coded female connectors. Features: The same signal cable assembly that ships with your Analog Discovery and Analog Discovery 2, now available separately Allows you to move your Analog Discovery between several projects without having to re-wire 2x15 keyed female connector with all 30 color-coded signal wires broken out individually Each signal wire is 260mm± 20

The 2x16 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. This assembly features a 2x16 keyed female pin connector for the DIN_USR connector, with 24 DIN signals (various colors) and 8 GND wires (black). The connector is keyed so that the correct pins are connected to the correct color wires. We also offer a High Speed Adapter for the Digital Discovery as an alternative to the 2x16 flywire kit, in order to increase maximum sample rate from 200MS/s to 800MS/s.  Features: The same signal cable assembly that ships with your Digital Discovery Allows you to move your Discovery between several projects without having to re-wire 2x16 keyed female connector with all 32 color-coded signal wires broken out individually 24 DIN signals (various colors) 8 GND wires (black) Each signal wire is 260mm ±20 What's Included: One 2x16 flywire signal cable assembly  

The 2x6 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. The 2X6 flywire features two VCCIO_USR wires (red), two GND wires (black), and eight signal wires (colored). It has a 2X6 female connector for the Digital Discovery DIN, and twelve 1-pin female connectors for the device under test.   Features: 2x6 female connector for Digital Discovery DIN connector 12 1-pin female connectors for the device under test 2x6 flywire signal cables: Two VCCIO_USR wires (red) Two GND wires (black) Eight signal wires (colored)

Features: Acts as a female-to-male gender changer for a 2x6 pin female header or cable Can connect any two Digilent 2x6 pin cables together Provides easy access for test and measurement Ships in a pack of 5  

Features: Designed to connect a 12-pin Pmod to a 12-pin system board connector Can be used to send Digilent System board signals to and from outside devices Uses standard 100mil-spaced 25mil square connectors 6" (15cm) in length

Features: Designed for use with Digilent Peripheral Modules that have 2x6 pin connectors Designed to connect two 6-pin system board connectors to a 12-pin Pmod connector, or to connect a 12-pin system board connector to two 6-pin Pmod connectors Uses standard 100mil-spaced 25mil square connectors 6" (15cm) in length

Note: purchase the bundle of all four PowerBRICKs and save!  Every circuit needs a power supply, but simple, low cost, portable, and reliable power sources can be hard to come by. The PowerBRICK family provides the solution to all of those requirements. There are four options to choose from: 12V, 9V, 5V, or 3.3V. PowerBRICKS are designed to easily plug directly onto your breadboard for simple, low profile integration. Powered by 5V from a standard USB, each PowerBRICK can provide up to 1.1W of power. PowerBRICKS can also be daisy-chained to provide more than one +/- Vout pair, but total power output for the entire chain should not exceed 2.2W. Available in four output voltages: 12V (±100mA) 9V (±130mA) 5V (±200mA) 3.3V (±320mA) Now available in a bundle including each of the four output voltages Support Materials: Datasheet (PDF) Schematics (PDF) For all other material: Resource Center Product Video:

This sticker sheet provides 30 plastic labels for the 30 pins on the Analog Discovery 2 flywires. We've heard from our users that it can be tedious to find the correct wire out of the 30 color-coded flywires each time they need to be used. Especially in the case that color isn't a useful identifier. Take the label off the sticker sheet, and apply it to the correct wire. No more searching through 30 wires for the correct one. Look for the flag and you're done! Features: Durable Plastic Coated Stickers  30 Labels Corresponding to the 30 Analog Discovery 2 Pins Pin Labels Correspond to the Analog Discovery 2 pinout diagram What's Included: One sheet of sticker labels for the Analog Discovery 2 30-pin flywire

This sticker sheet provides 30 plastic labels for the 30 pins on the OpenScope MZ flywires. Based on the popularity of the Analog Discovery 2 Flywire Labels, we decided to create a similar sticker sheet for the OpenScope MZ. Just remove the label off the sticker sheet and apply it to the correct wire. No more searching through 30 wires, just look for the flag and you're done! Features: Durable Plastic Coated Stickers  30 Labels Corresponding to the 30 OpenScope MZ Pins Pin Labels Correspond to the OpenScope MZ pinout diagram Includes One sheet of sticker labels for the OpenScope MZ 30-pin flywire  

Features: 9" in length Can be used with any Digilent board Ideal for testing and verification  

Features: 9" in length Can be used with any Digilent board Ideal for testing and verification  

Note: This Product has pins for through-hole mounting and is not suitable for surface mounting. Features: Perfect for our Cmod or anything in the 2x20-pin DIP package Current rating: 1Amp Contact resistance: 20mΩ max  

Features: 5V, 2.5A Switching Power Supply Suitable for use with the Zybo™ FPGA board  Can also be used as an external power supply for the Analog Discovery 2  

Features: 5VDC switching supply, with 4000mA current Comes with US and EU plug adapters For use with Digilent FPGA & Microcontroller boards  

Note: purchase the bundle of all four PowerBRICKs and save!  Every circuit needs a power supply, but simple, low cost, portable, and reliable power sources can be hard to come by. The PowerBRICK family provides the solution to all of those requirements. There are four options to choose from: 12V, 9V, 5V, or 3.3V. PowerBRICKS are designed to easily plug directly onto your breadboard for simple, low profile integration. Powered by 5V from a standard USB, each PowerBRICK can provide up to 1.1W of power. PowerBRICKS can also be daisy-chained to provide more than one +/- Vout pair, but total power output for the entire chain should not exceed 2.2W. Available in four output voltages: 12V (±100mA) 9V (±130mA) 5V (±200mA) 3.3V (±320mA) Now available in a bundle including each of the four output voltages Product Video:

Features: Changes gender for any 6-pin female header, female to male Connects any 2 digilent 6-pin cables together Provides easy access for test and measurement Ships in a pack of 5

Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification

This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards. Features: Available in lengths of 6", 12", and 18" Designed for use with Digilent peripheral modules Can be used to send FPGA signals to an outside device Greater flexibility when connecting your 6-pin Pmod to a host board Uses the standard 100mil spaced 25mil square connector What's Included: One 6-pin cable (in lengths of either 6", 12", or 18") One 6-pin gender changer

This 12V 5A AC/DC adapter is the perfect solution for powering your Digilent NetFPGA-1G-CML board. With the PCIe output connector, you can use this power supply with other devices that use PCIe power connectors. Note: Not recommended for the NetFPGA-SUME Not for use with Xilinx® development boards Features: Rated AC input voltage: 100 ~ 240VAC, 50-60Hz AC input current: 1800mA Output DC voltage: 12VDC, +/-5% DC output current: 0-5000mA Output connector: 6-pin molex PCIe Efficiency: Guaranteed at least 87% MTBF: 40,000 hr @ 25 C  

This 12V 5A AC/DC adapter is the perfect solution for powering your Digilent NetFPGA-1G-CML board. With the PCIe output connector, you can use this power supply with other devices that use PCIe power connectors. Note: Not recommended for the NetFPGA-SUME Not for use with Xilinx® development boards Features: Rated AC input voltage: 100 ~ 240VAC, 50-60Hz AC input current: 1800mA Output DC voltage: 12VDC, +/-5% DC output current: 0-5000mA Output connector: 6-pin molex PCIe Efficiency: Guaranteed at least 87% MTBF: 40,000 hr @ 25 C  

Our female-to-female 2-pin MTE cables are an ideal way to test your signals and verify your project. Choose from lengths of 9" or 18" to fit your needs. Each order ships in a pack of five.  Features: Available in lengths of 9" and 18" Can be used with any Digilent board Ideal for testing and verification Ships in pack of 5

Note: purchase the bundle of all four PowerBRICKs and save!  Every circuit needs a power supply, but simple, low cost, portable, and reliable power sources can be hard to come by. The PowerBRICK family provides the solution to all of those requirements. There are four options to choose from: 12V, 9V, 5V, or 3.3V. PowerBRICKS are designed to easily plug directly onto your breadboard for simple, low profile integration. Powered by 5V from a standard USB, each PowerBRICK can provide up to 1.1W of power. PowerBRICKS can also be daisy-chained to provide more than one +/- Vout pair, but total power output for the entire chain should not exceed 2.2W. Available in four output voltages: 12V (±100mA) 9V (±130mA) 5V (±200mA) 3.3V (±320mA) Now available in a bundle including each of the four output voltages Product Video:

DIN-rail kit for BTH-1208LS, E-1608, E-DIO24, USB-200 Series (excludes OEM versions), and WebDAQ Series (when used with ACC-404 mounting kit) Features: Use with ACC-404 mounting kit for WebDAQ.  Included: DIN-rail kit 8 mounting screws

Panel/wall mounting kit for WebDAQ Series hardware; use with the ACC-205 to mount on a DIN rail. Features: Can be used with ACC-404 mounting kit for WebDAQ  Included: Panel/wall mounting kit for WebDAQ series hardware